Altronix AL1024ULACM Power Sup...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$575.69
Altronix AL1024ULACM Power Supply/Access Power Controller, Input 115VAC 60Hz at 4.2A, 8 Fused Outputs, 24VDC at 10A, Grey Enclosure

Altronix AL1024ULACM Power Supply/Access Power Controller, Input 115VAC 60Hz at 4.2A, 8 Fused Outputs, 24VDC at 10A, Grey Enclosure

(No reviews yet) Write a Review

Model: AL1024ULACM

In Stock (leaves warehouse same day if ordered before 3pm ET)

$575.69
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
10A
Features:
Converts a 115VAC 60Hz Input into Eight (8) Independently Controlled 12VDC Fail-Safe/Fail-Secure Outputs with a Total of 10A Continuous Supply Current
Includes:
Includes Enclosure, Charger, 8 Fused Relay Outputs
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix AL1024ULACM – Frequently Asked Questions

1) How many devices can I run off an Altronix AL1024ULACM, and is each output controlled separately?
Eight outputs, each independently controlled and individually fused, sharing a total of 10A of continuous supply current. So the practical limit is not the output count, it's the budget: add up the holding current of every lock, strike and maglock you intend to land on it and stay inside 10A. Eight openings at roughly a quarter to half an amp each fits comfortably; eight large maglocks does not.
2) Can the AL1024ULACM drive both fail-safe and fail-secure locks on the same panel?
Yes, and that is the point of the ACM board. Each of the eight outputs is independently controlled and can be set fail-safe or fail-secure, so one enclosure can feed mag locks that must drop on alarm alongside electric strikes that must stay locked when power is lost. Mixed openings on one floor no longer need two separate supplies.
3) Is the AL1024ULACM overkill for a two or three door access control job?
For two or three openings it usually is. The eight-output, 10A board is sized for a floor or a building riser. For a small job look at the Securitron AQL4 switching supply at 12/24VDC 4/3A, the Command Access PS204/204B at 2A 24VDC with battery backup, or the Von Duprin PS902 base supply at 2A 12/24VDC field selectable. Those are single or low-current supplies that cost you less panel space and less current you will never use.
4) My exit devices use motorized latch retraction. Will the AL1024ULACM run them?
Motorized latch retraction devices are normally fed from a supply built for that inrush, and the BEST RPSMLR2 is a power supply made specifically for motorized latch retraction exit devices. Delayed egress exit devices have their own dedicated unit as well, the BEST PS161-6, with 120V input, 12/24V output and 6A capacity. The Altronix AL1024ULACM is a general access power controller with eight independently controlled fail-safe/fail-secure outputs, which is the right shape for strikes and maglocks rather than for an MLR device stack.
5) What is the closest equivalent to the Altronix AL1024ULACM if I need eight access-controlled outputs but only about 2 amps of load?
The RCI DKPS-2A is the nearest match in architecture: it is a power supply with 8 outputs at 12/24VDC at 2A for access control systems, so you keep the same eight-output distribution scheme at a much smaller current budget. The AL1024ULACM supplies 10A of current at 120V input, so it is the one to keep when eight doors of maglocks or strikes will actually draw near that total. If your eight openings are low-draw strikes, the DKPS-2A covers the same fan-out.
6) I need 10 amps at 12VDC instead of 24VDC for a camera and strike run. What should I order?
The Securitron AQS1210 is a switching power supply rated 12 VDC at 10 Amp, so it holds the same 10A current class while committing to 12VDC. The Altronix AL1024ULACM is the 10A unit built around independently controlled fail-safe/fail-secure outputs, which is what you want when each door has to release on its own. Choose the AQS1210 when the job is a single-voltage 12VDC bus and the switching outputs do not need per-door control.
7) Is a Von Duprin PS902 a substitute for an Altronix AL1024ULACM?
They sit at different ends of the load range. The PS902 is a base power supply rated 2A at 12/24 VDC field selectable for access control and carries a Grade 1 rating. The AL1024ULACM carries eight fused relay outputs with an enclosure and charger, and 10A of continuous current. If you are powering one or two openings off an exit device manufacturer's own board stack, the PS902 base is the usual path; for an eight-door distribution panel with battery charging, the AL1024ULACM is the larger unit.
8) What power do I need at the wall for an Altronix AL1024ULACM access power controller?
Standard 120V building power. The unit converts a 115VAC 60Hz input, so a dedicated 120V circuit at the equipment room is all the electrician needs to bring in. No transformer or step-down gear on the line side.
9) Does the Altronix AL1024ULACM come with a cabinet, or do I have to buy an enclosure separately?
The enclosure ships with it, along with the battery charger and the eight fused relay outputs. What is not included is the standby battery itself, so order batteries separately if the openings need to stay powered through an outage.
10) What else does ZenSupply carry that gives eight access control outputs from one enclosure?
The closest multi-output peer is the RCI DKPS-2A, also an eight-output access control supply at 12/24VDC but rated 2A total rather than 10A. Same output count, far less current to share across the doors, so it suits eight low-draw strikes where the Altronix suits a mix that includes higher-draw hardware.
11) What is a simpler option than the AL1024ULACM for a single door with battery backup?
For one opening, the Adams Rite PS-1 is a regulated power supply rated 1 amp at 12/24 volts DC with battery backup, and the Command Access PS204/204B is a linear supply with 2A at 24VDC and battery backup. Both give you the standby battery function on a single-door scale. The Altronix AL1024ULACM is the multi-door version of that idea, with a charger and eight fused relay outputs in one enclosure, so it is the choice when a whole bank of doors runs off one panel.
12) What is between the AL1024ULACM and a 1 amp supply if I only have four doors?
The SDC 634 Series is a 4 amp regulated and filtered low voltage power supply with dual voltage selection, and the Securitron AQL4 is a switching supply at 12/24VDC rated 4/3 Amp. Either covers a mid-size run without stepping to the 10A class. The Altronix AL1024ULACM is the one to specify when you need eight fused relay outputs off a single enclosure with a charger included, rather than a smaller supply feeding a separate distribution board.
13) Does a Detex 10-800 controller do the same job as the AL1024ULACM?
The Detex 10-800 Series is a universal logic controller that carries a 120VAC/24VDC power supply and battery backup, so it adds sequencing logic on top of the power. The Altronix AL1024ULACM is an access power controller with eight independently controlled fail-safe/fail-secure outputs and a total of 10A continuous supply current, aimed at distributing controlled power to multiple openings. If the job needs door logic rather than eight-way power distribution, the 10-800 is the different tool.
14) Which power supplies look like a substitute for the AL1024ULACM but are not?
A few in the same family solve narrower problems. The ROFU 9126T is a plug-in mini power supply, 12 VDC at 1.5A with time delay. The Command Access CAT Field Tester is a portable 12-24VDC supply that runs off DeWalt, Makita and Milwaukee batteries, meant for bench and field checks. The Securitron BPSS is a boxed solar power supply. The ROFU 10305-LA is not a supply at all but a power transfer hinge rated 1.5A at 42V. The Altronix AL1024ULACM is the fixed eight-output access power controller with a charger and enclosure carrying 10A.
15) I am standardizing a facility on one 24VDC supply. What are my options at smaller amperages?
On the 24VDC side the Command Access PS1 Series is a linear supply with 1 amp output, and the PS210 is a UL 6E/CSA linear supply with 1.5A at 24VDC and boost circuitry. The SDC 631 Series is a 1.5 amp regulated and filtered DC power controller with dual voltage selection, and the SDC 632 Series is the 2 amp version. The Altronix AL1024ULACM is the commercial unit at the top of that ladder, running 10A off a 120V input with eight fused outputs, which is the one that lets several openings share a single panel.
16) Is the Altronix AL1024ULACM a commercial grade panel or is it meant for home use?
Commercial. It is an access power controller with an integral power supply, built to sit in an equipment room and feed door hardware across a building, not a plug-in transformer. For a small residential or single-door application, a plug-in unit like the ROFU 9126T mini supply at 12VDC 1.5A with time delay is the right scale.
17) Can I use the AL1024ULACM to power an intercom or access control kit instead of the kit's own supply?
Kit-matched supplies exist for that reason: the Aiphone AC-PS1250 is a 12V DC 5A UL Listed supply built for the AC Series access control kits, and the BEST ELR150 Series is a power supply control module for electronic access control. The Altronix AL1024ULACM is a general commercial access power controller with eight fused relay outputs and 10A of current, so it works as the building power source feeding devices, while a kit supply is matched to one manufacturer's head end.
18) What is the difference between the AL1024ULACM and a Locknetics LP Series supply with enclosure?
Both are enclosure-mounted supplies. The Locknetics LP Series covers 150 and 250 Amp power supply models with enclosure. The Altronix AL1024ULACM comes as an enclosure with charger and eight fused relay outputs, converting a 115VAC 60Hz input into independently controlled fail-safe/fail-secure outputs at 10A total. The deciding factor is whether you need per-output fail-safe/fail-secure control at each door or simply a boxed supply feeding a bus.
How fast can I get the Altronix AL1024ULACM delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix AL1024ULACM come with a warranty?
Absolutely. The Altronix AL1024ULACM is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix AL1024ULACM?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix AL1024ULACM from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!