Altronix ALTV615DC1016 CCTV Po...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$549.61
$454.32
Altronix ALTV615DC1016 CCTV Power Supply, Input 115VAC 50/60Hz at 1.9A, 16 Fuse Protected Outputs, 6/15VDC at 10A, Grey Enclosure

Altronix ALTV615DC1016 CCTV Power Supply, Input 115VAC 50/60Hz at 1.9A, 16 Fuse Protected Outputs, 6/15VDC at 10A, Grey Enclosure

(No reviews yet) Write a Review

Model: ALTV615DC1016

In Stock (leaves warehouse same day if ordered before 3pm ET)

$549.61
$454.32
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
10A
Features:
Provides 6-15VDC Distributed via Sixteen (16) Fuse Protected Outputs for Powering CCTV Cameras
Includes:
Includes Enclosure, 16 Fused Outputs
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix ALTV615DC1016 – Frequently Asked Questions

1) How many cameras can the Altronix ALTV615DC1016 power?
The ALTV615DC1016 distributes 6-15VDC across sixteen individually fuse protected outputs, so it can feed up to 16 cameras from one enclosure. Total draw across all sixteen has to stay within the 10A rating, so budget roughly 600mA per camera if you intend to load all sixteen. Fewer cameras pulling more current each is fine as long as the sum stays under 10A.
2) Can I use the ALTV615DC1016 to power maglocks or electric strikes on an access control job?
It is built as a camera power distribution unit, putting out 6-15VDC across sixteen fused taps, which does not match the 12/24VDC field-selectable output most locking hardware is specified at, and it carries no battery backup. For door hardware use a dedicated access power supply instead, such as the Von Duprin PS902 base power supply (2A, 12/24VDC field selectable) or the RCI DKPS-2A, which gives 8 outputs at 12/24VDC and 2A.
3) What is the closest 10 amp alternative to the Altronix ALTV615DC1016 for a camera job?
The Securitron AQS1210 is a switching power supply rated 12VDC at 10 amps, matching the ALTV615DC1016 on total output current, which is 10A. The difference is distribution and voltage range: the ALTV615DC1016 supplies 6 to 15VDC spread across sixteen fuse protected outputs for powering CCTV cameras, so each camera gets its own fused run from the enclosure, while the AQS1210 is a single fixed 12VDC supply that would need a separate fused distribution board to feed multiple cameras.
4) I need multiple fused outputs but not 10 amps - what is a smaller multi-output option than the ALTV615DC1016?
The RCI DKPS-2A is a multi-output supply with 8 outputs at 12/24VDC and 2A for access control systems, so it covers a smaller camera or device count on a fraction of the current. The ALTV615DC1016 carries 10A across sixteen fuse protected outputs at 6 to 15VDC. Choose by the number of drops you need to land and the total draw: sixteen cameras at 10A total versus eight devices sharing 2A.
5) My devices need 24VDC - can I use the Altronix ALTV615DC1016?
No. The ALTV615DC1016 provides 6 to 15VDC, so it will not drive a 24VDC load. For 24V work, the Securitron AQL4 is a switching supply rated 12/24VDC at 4/3 amps, and the Von Duprin PS902 is a 2A 12/24VDC field selectable base power supply for access control. Both select up to 24V, but neither offers the sixteen fused camera outputs the ALTV615DC1016 provides.
6) Can the Altronix ALTV615DC1016 power an electrified exit device or mag lock?
It is built to distribute 6 to 15VDC to CCTV cameras over sixteen fused outputs, not to run door hardware control functions. For exit devices, the BEST PS161-6 is a 120V input, 12/24V output 6A supply for delayed egress exit devices, and the BEST RPSMLR2 is a supply for motorized latch retraction exit devices, which draw a high inrush the camera supply is not arranged for. A single powered opening can also be served by the Securitron AQD1 at 12/24VDC 1 amp.
7) What input power do I need to run this Altronix CCTV power supply?
It runs on standard 120V line power, so a dedicated 120VAC branch circuit or receptacle at the equipment rack is all that is needed. No transformer or separate step-down is required ahead of it.
8) Does the ALTV615DC1016 come with an enclosure or do I need to buy one?
The enclosure ships with it, along with the sixteen fused outputs already in place. Nothing further is needed to mount it as a unit; you supply the line-voltage connection and the camera wiring.
9) Why choose a fuse protected multi-output supply instead of individual plug-in camera transformers?
Each of the sixteen outputs on the ALTV615DC1016 is separately fuse protected, so a short on one camera run opens that fuse only and the other fifteen cameras stay up. Individual wall-plug supplies scatter the power across the building, need sixteen receptacles, and give you no single point to kill or meter the camera bus. For a rack or head-end install where all the coax and power leaves from one place, the distributed unit is the cleaner install.
10) Does the Altronix ALTV615DC1016 include battery backup, and what should I use if I need it?
The ALTV615DC1016 ships as a CCTV power supply in a grey enclosure with sixteen fused outputs; it is a distribution supply, not a charger with standby batteries. If the opening or camera run must survive a power loss, the Command Access PS204/204B is a linear supply with 2A at 24VDC and battery backup, and the Adams Rite PS-1 is a regulated 1 amp 12/24VDC supply with battery backup. Both carry far less current than 10A, so size them to the standby load only.
11) What is the difference between the Altronix ALTV615DC1016 and a plug-in supply like the ROFU 9126T?
The ROFU 9126T is a plug in mini power supply at 12VDC and 1.5A with time delay, intended for a single device off a wall outlet. The ALTV615DC1016 is a hard wired 120V unit in a grey enclosure that takes 115VAC input and distributes 6 to 15VDC at 10A across sixteen fuse protected outputs. Use the plug-in for one camera or strike; use the enclosed unit when many cameras are homed back to one point.
12) Is a dual-voltage SDC supply an equivalent swap for the Altronix ALTV615DC1016?
Not on capacity. The SDC 634 is a 4 amp regulated and filtered low voltage supply with dual voltage selection, and the SDC 632 is the 2 amp version of the same family. Both are single-output regulated supplies, whereas the ALTV615DC1016 carries 10A and breaks it out into sixteen individually fused outputs. If you are feeding one load or a small distribution block, the SDC units apply; for a sixteen-camera head end, they do not replace the fused breakout.
13) Is this Altronix supply rated for commercial installations?
Yes, the ALTV615DC1016 is a commercial-duty unit, which is what you want for a multi-camera head end in a facility, school, or multi-family property rather than a single-camera residential setup.
14) I only have four or five cameras, is a sixteen output supply overkill?
For a small camera count it usually is. Sixteen fused taps and a 10A budget make sense when you are wiring a full head end or expect to add cameras later on the same bus. For a handful of devices, smaller regulated supplies like the SDC 634 Series (4 amp, dual voltage selection) or the SDC 632 Series (2 amp) cover the load with a smaller footprint.
How fast can I get the Altronix ALTV615DC1016 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix ALTV615DC1016 come with a warranty?
Absolutely. The Altronix ALTV615DC1016 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix ALTV615DC1016?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix ALTV615DC1016 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!