Altronix ALTV2416 CCTV Power S...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$366.42
$240.38

Altronix ALTV2416 CCTV Power Supply, Input 115VAC 50/60Hz at 1.9A, 16 Fuse Protected Outputs, 24VAC at 8A or 28VAC at 7A, Grey Enclosure

(No reviews yet) Write a Review

Model: ALTV2416

In Stock (leaves warehouse same day if ordered before 3pm ET)

$366.42
$240.38
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

CCTV Power Supply, Input 115VAC 50/60Hz at 1.9A, 16 Fuse Protected Outputs, 24VAC at 8A or 28VAC at 7A, Grey Enclosure

Model ALTV2416 provides 24VAC or 28VAC distributed via sixteen (16) fuse protected outputs. ALTV2416220 is a 220VAC Input version of this unit.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
8A
Features:
Provides 24VAC or 28VAC Distributed via Sixteen (16) Fuse Protected Outputs
Includes:
Includes Enclosure, 16 Fused Outputs
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix ALTV2416 – Frequently Asked Questions

1) How many cameras can one ALTV2416 power?
Sixteen outputs, each individually fuse protected, so up to 16 camera runs off one box. The limit is total current, not output count: 8A shared at 24VAC, or 7A at 28VAC. Add up the draw of every camera plus any heater/blower housings before you load all sixteen, because a housing with a heater can pull more than the camera itself.
2) Does one output shorting out take down the whole ALTV2416?
No. Each of the sixteen outputs is separately fuse protected, so a shorted camera lead or a pinched wire on one run blows that fuse and leaves the other fifteen cameras up. That is the main reason to run a distributed box like this rather than daisy chaining several small plug-in transformers.
3) I need DC output for maglocks, not the AC output the ALTV2416 provides. What should I use instead?
The ALTV2416 is an AC output supply - it delivers 24VAC or 28VAC across sixteen fuse protected outputs, which suits AC-powered cameras and similar loads but not DC locking hardware. For DC, the RCI DKPS-2A is a multi-output option with 8 outputs at 12/24VDC and 2A. For larger DC current at a single voltage, the Securitron AQS1210 is a switching supply rated 12 VDC at 10 Amp. The Securitron AQL4 is a switching supply at 12/24VDC, 4/3 Amp, and the Von Duprin PS902 is a 2A 12/24 VDC base power supply that is field selectable for access control.
4) Does the ALTV2416 give me battery backup, or do I need a different supply for that?
The ALTV2416 is a 115VAC input unit distributing 24VAC at 8A or 28VAC at 7A over sixteen fused outputs, and what ships with it is the enclosure and those fused outputs. If your application requires standby battery support, look to units specified with it: the Adams Rite PS-1 is a 1 Amp 12/24 VDC regulated supply with battery backup, the Command Access PS204/204B is a linear supply with 2A at 24VDC and battery backup, and the Detex 10-800 is a universal logic controller with a 120VAC/24VDC power supply and battery backup.
5) Can I power a motorized latch retraction exit device or a delayed egress device off the ALTV2416?
Those devices are matched to supplies built for their inrush and control behavior, not to a general AC distribution unit. The ALTV2416 distributes 24VAC or 28VAC through sixteen fuse protected outputs and is described for CCTV, fire alarm and POIP use. For motorized latch retraction, the BEST RPSMLR2 is a power supply made for motorized latch retraction exit devices. For delayed egress, the BEST PS161-6 is a 120V input, 12/24V output supply with 6A capacity for delayed egress exit devices. The BEST ELR150 is a power supply control module for electronic access control.
6) Is anything else needed with the ALTV2416, or does it come ready to mount?
It ships with the grey enclosure and the sixteen fused outputs built in. You supply the 115VAC feed to the unit and the field wiring out to the devices.
7) What should I buy instead of the ALTV2416 if I only need to power one or two electrified locks?
A sixteen-output 8A AC box is overkill and the wrong output type for most lock hardware. For a single opening, a small DC supply fits better: the Command Access PS1 gives 1 amp at 24VDC, the SDC 632 is a 2 amp regulated and filtered low voltage supply with dual voltage selection, and the Adams Rite PS-1 is a 1 amp 12/24VDC regulated supply with battery backup if you need the lock to hold through an outage.
8) My building is 220VAC. Is the ALTV2416 the right part?
The ALTV2416 itself is the 115VAC 50/60Hz input version, drawing 1.9A on the input side and listed at 120V. Altronix makes the ALTV2416220 as the 220VAC input version of the same unit, so that is the model to specify on a 220V feed rather than adapting the 115V unit.
9) I only need to power one or two devices - is there something smaller than a 16 output ALTV2416?
Yes. The ALTV2416 is built for distribution, with sixteen fuse protected outputs at 24VAC or 28VAC in an enclosure. For a single device, the Command Access PS1 is a 24VDC linear supply with 1 Amp output, the SDC 620 is a 1 Amp regulated and filtered low voltage supply with dual voltage selection, and the Securitron AQD1 is a 12/24 VDC 1 Amp switching supply. The ROFU 9126T is a plug in mini supply at 12 VDC / 1.5A with time delay. Note these single-device units are DC output, so confirm your load accepts DC before swapping.
10) What is a comparable multi-output supply if I want DC distribution instead of the ALTV2416's AC distribution?
The closest peer on output count is the RCI DKPS-2A, which offers 8 outputs at 12/24VDC and 2A for access control systems - half the output count of the ALTV2416's sixteen and on DC rather than AC. The ALTV2416 carries 24VAC at 8A or 28VAC at 7A across its sixteen fuse protected outputs, so it is the higher-current, higher-count option where AC loads are what you are feeding.
11) I need roughly 4 amps of regulated DC for a few strikes - is the ALTV2416 overkill?
For a handful of DC strikes, yes, the ALTV2416 is an AC distribution unit with sixteen fused outputs and would need DC-capable hardware downstream. A closer fit is the SDC 634, a 4 Amp regulated and filtered low voltage supply with dual voltage selection, or the SDC 632 at 2 Amp and SDC 631 at 1.5 Amp if the load is smaller. The Command Access PS210 is a UL 6E/CSA linear supply with 1.5A at 24VDC and boost circuitry.
12) I need a UL listed supply for an access control kit - is the ALTV2416 that part?
The ALTV2416 is a commercial AC power supply distributing 24VAC or 28VAC over sixteen fuse protected outputs, described for CCTV, fire alarm and POIP applications. If you are powering a packaged access control kit, the Aiphone AC-PS1250 is a UL listed 12V DC 5A supply made for AC Series access control kits, and the ROFU 9102-12D UL / 9102-24D is a supply with 10/120VAC 60Hz input.
13) Can the ALTV2416 be used for something other than CCTV, like fire alarm or PoIP?
Yes, Altronix lists it for general use, CCTV, fire alarm and PoIP. The only real constraint is that whatever you connect has to accept AC at 24 or 28 volts and fit inside the 8A (or 7A) total budget.
14) Is the ALTV2416 rated for commercial installation or is it a residential unit?
It is a commercial grade supply, fed from a 120V branch circuit. The enclosed sixteen-output format is built for a head end or IDF closet feeding a camera fleet across a building, not for a single-camera residential install.
15) Which of these comes with an enclosure like the ALTV2416's grey enclosure?
The ALTV2416 ships with its enclosure along with the 16 fused outputs. Among comparable boxed units, the Locknetics LP Series is supplied with an enclosure, and the Securitron BPSS is a boxed solar power supply. The ROFU 9126T, by contrast, is a plug in mini supply rather than an enclosed wall-mount unit.
16) What do my techs use to bench test hardware, since the ALTV2416 is a fixed install unit?
The ALTV2416 is a 115VAC input unit in a grey enclosure feeding sixteen fused outputs, intended to be mounted and wired. For portable testing at the door, the Command Access CAT Field Tester is a 12-24VDC portable power supply that runs off DeWalt, Makita and Milwaukee batteries. It is a test tool rather than a substitute for permanent distribution.
How fast can I get the Altronix ALTV2416 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix ALTV2416 come with a warranty?
Absolutely. The Altronix ALTV2416 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix ALTV2416?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix ALTV2416 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.