Altronix ALTV2416350 CCTV Powe...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$516.15
$405.39
Altronix ALTV2416350 CCTV Power Supply, Input 115VAC 50/60Hz at 2.7A, 16 Fuse Protected Outputs, 24VAC at 14A or 28VAC at 12.5A, Grey Enclosure

Altronix ALTV2416350 CCTV Power Supply, Input 115VAC 50/60Hz at 2.7A, 16 Fuse Protected Outputs, 24VAC at 14A or 28VAC at 12.5A, Grey Enclosure

(No reviews yet) Write a Review

Model: ALTV2416350

In Stock (leaves warehouse same day if ordered before 3pm ET)

$516.15
$405.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
14A
Features:
Provides 24VAC or 28VAC VAC Distributed via Sixteen (16) Fuse Protected Outputs for Powering CCTV Cameras
Includes:
Includes Enclosure, 16 Fused Outputs
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix ALTV2416350 – Frequently Asked Questions

1) Can I use the ALTV2416350 to power maglocks, strikes or exit device latch retraction?
No. This is an AC distribution unit for CCTV cameras and has no DC output or battery charging. Access control hardware wants regulated DC: a Von Duprin PS902 base supply gives field selectable 12/24VDC at 2A, and for motorized latch retraction exit devices the BEST RPSMLR2 is the purpose-built supply.
2) I only need to power one or two electric strikes, not a camera bank. What should I buy instead of the Altronix ALTV2416350?
The ALTV2416350 is sized for camera distribution, with sixteen fuse protected outputs at 24VAC 14A. For a single opening running an electric strike or maglock, a small DC supply fits the load better: the Command Access PS1 is a 24VDC linear power supply with 1 amp output, the SDC 620 is a 1 amp regulated and filtered low voltage supply with dual voltage selection, and the Securitron AQD1 is a switching supply rated 12/24 VDC at 1 Amp. All three are DC output, which is what most electric strikes and maglocks take.
3) What is the closest multi-output alternative to the Altronix ALTV2416350 if my devices are 12 or 24VDC?
The RCI DKPS-2A is the nearest multi-output peer on the DC side: it is a power supply with 8 outputs at 12/24VDC, 2A, for access control systems. The Altronix ALTV2416350 differs in both count and form: sixteen fuse protected outputs at 24VAC 14A or 28VAC 12.5A, from a 115VAC 50/60Hz input, in a grey enclosure. Choose by what the field devices accept - AC cameras on the Altronix, DC locks and readers on the DKPS-2A.
4) Is the Altronix ALTV2416350 the right supply for a delayed egress exit device or motorized latch retraction hardware?
No - those loads have dedicated supplies. The BEST PS161-6 is built for delayed egress exit devices, with 120V input, 12/24V output and 6A capacity, and the BEST RPSMLR2 is a power supply for motorized latch retraction exit devices. The Altronix ALTV2416350 is an AC output unit, 24VAC at 14A or 28VAC at 12.5A over sixteen fuse protected outputs, intended for powering CCTV cameras.
5) What input power does the ALTV2416350 need at the panel?
Standard 120V building power. It is a 115VAC unit, so an electrician terminates it to a dedicated 120VAC circuit; there is no line cord decision to make and no 230V configuration involved.
6) Does the Altronix ALTV2416350 come with an enclosure or do I need to buy one?
The enclosure is included, along with the sixteen fused outputs, so it mounts as a complete grey wall unit. You supply the conduit, line-side wiring and camera home runs.
7) Why choose 28VAC over 24VAC on this Altronix CCTV supply?
The higher tap compensates for voltage drop on long camera runs. Selecting 28VAC costs you capacity, dropping the total from 14A to 12.5A, so use 24VAC for short runs where you need every amp and step to 28VAC when distant cameras are browning out.
8) If one camera shorts out, does the whole Altronix ALTV2416350 go down?
No. Each of the sixteen outputs is individually fuse protected, so a shorted or faulted camera run opens its own fuse and the other fifteen circuits keep running. That also makes troubleshooting quicker, since a blown fuse points straight at the bad leg.
9) Which alternatives to the Altronix ALTV2416350 include battery backup?
The ALTV2416350 ships as an enclosure with 16 fused outputs running 24VAC at 14A from a 115VAC 50/60Hz input. If the installation needs standby power, the Adams Rite PS-1 is a regulated 1 amp 12/24 volt DC supply with battery backup, the Command Access PS204/204B is a linear supply with 2A at 24VDC and battery backup, and the Detex 10-800 is a universal logic controller with a 120VAC/24VDC power supply and battery backup. All three are DC output and much lower current, so they suit lock and controller loads rather than a large camera bank.
10) I need a UL listed 12VDC supply for an access control kit - does the Altronix ALTV2416350 cover that?
It does not match that load. The ALTV2416350 is a commercial 120V unit whose sixteen fuse protected outputs deliver 24VAC or 28VAC for cameras. For an access control kit on 12VDC, the Aiphone AC-PS1250 is a power supply for AC Series access control kits, 12V DC 5A, UL listed, and the Securitron AQL4 is a switching supply rated 12/24VDC at 4/3 Amp.
11) How do the SDC 632 and SDC 634 compare with the Altronix ALTV2416350 for a mid-size job?
The SDC 632 is a 2 amp regulated and filtered low voltage power supply with dual voltage selection and the SDC 634 is the 4 amp version of the same regulated and filtered design with dual voltage selection. Both are single-supply units chosen by amperage. The Altronix ALTV2416350 is a distribution-style unit instead: one 115VAC 50/60Hz input at 2.7A feeding sixteen individually fuse protected outputs at 24VAC 14A or 28VAC 12.5A, supplied in a grey enclosure. Pick the SDC units when you are feeding a regulated DC bus; pick the Altronix when you need many separately fused AC camera runs from one box.
12) Is the ALTV2416350 meant for a house or a commercial building?
Commercial. A sixteen-output, 14A AC head end is sized for a building-wide camera system in a school, hospital, hotel or multi-family property, not a handful of residential cameras. For one or two devices a small plug-in unit like the ROFU 9126T mini supply is the right scale.
13) Is a ROFU 9126T plug-in mini supply or a ROFU 10305-LA a substitute for the Altronix ALTV2416350?
No. The ROFU 9126T is a plug in mini power supply rated 12 VDC at 1.5A with time delay, and the ROFU 10305-LA/10306-LA is a tamper resistant power transfer hinge rated 1.5A at 42V - that one is a hinge that carries power through the door, not a supply at all. The Altronix ALTV2416350 is an enclosed commercial unit with 16 fused outputs at 24VAC 14A off a 115VAC input. If you want a ROFU supply in a box, the 9102-12D UL/9102-24D runs on 10/120VAC 60Hz input.
14) What should I carry for bench testing or temporary power rather than installing an Altronix ALTV2416350?
The Command Access CAT Field Tester is the portable option - a 12-24VDC field tester that runs on DeWalt, Makita and Milwaukee batteries, so it powers a device at the door with no AC source. The Altronix ALTV2416350 is a permanently mounted commercial unit in a grey enclosure, fed from 115VAC 50/60Hz at 2.7A and distributing 24VAC to sixteen fused outputs, so it is a fixed head-end install rather than something you bring to the opening.
How fast can I get the Altronix ALTV2416350 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix ALTV2416350 come with a warranty?
Absolutely. The Altronix ALTV2416350 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix ALTV2416350?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix ALTV2416350 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!