Altronix MAXIMAL3RH Rack Mount...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,016.02
$794.27
Altronix MAXIMAL3RH Rack Mount Access Power Controller, 115VAC 60Hz at 1.9A Input, 8 Fuse Protected Outputs 12/24VDC at 6A

Altronix MAXIMAL3RH Rack Mount Access Power Controller, 115VAC 60Hz at 1.9A Input, 8 Fuse Protected Outputs 12/24VDC at 6A

(No reviews yet) Write a Review

Model: MAXIMAL3RH

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,016.02
$794.27
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix MAXIMAL3RH – Frequently Asked Questions

1) How many doors or devices can the Altronix MAXIMAL3RH power at once?
The MAXIMAL3RH gives you eight fuse protected outputs off a single 115VAC 60Hz feed, so one unit can feed eight separate loads, maglocks, strikes, readers, or controller boards, from one enclosure. The DC section is rated 12/24VDC at 6A total, so size the sum of your device draws against that 6A budget rather than assuming 6A per output.
2) Is the MAXIMAL3RH 12 volt or 24 volt?
Both. The MAXIMAL3RH runs 12VDC or 24VDC output, so it covers 12V strikes and readers as well as 24V maglocks and electrified exit device trim. Pick the output voltage that matches your locking hardware before you energize anything, since a 12V strike on a 24V rail will cook.
3) Does the Altronix MAXIMAL3RH mount in a standard equipment rack?
Yes. The MAXIMAL3RH is a rack mount access power controller, so it belongs in the IT or head end rack alongside your access control panels rather than surface mounted on a wall near the door. If your install is a wall mounted enclosure in an electrical closet, a boxed supply like the RCI DKPS-2A or a Securitron AQL is the shape you want instead.
4) Is the Altronix MAXIMAL3RH overkill for a single door?
For one opening, yes. Eight outputs at 12/24VDC 6A is built for a multi door access control head end. A single door strike or maglock is better served by a small supply such as the Securitron AQD1 at 12/24VDC 1 amp, the Command Access PS1 at 24VDC 1 amp, or the Von Duprin PS902 at 2A 12/24VDC field selectable.
5) What is the closest multi-output alternative to the Altronix MAXIMAL3RH for an access control panel?
The RCI DKPS-2A is the nearest multi-output match: it also provides 8 outputs at 12/24VDC, but rated at 2A versus the MAXIMAL3RH's 12/24VDC at 6A. If the door hardware load across eight openings is light - strikes and small maglocks - the DKPS-2A covers the same output count; for motorized latch retraction or heavier simultaneous draw, the 6A capacity of the MAXIMAL3RH is the one to size to.
6) I only need to power one or two electrified devices - is there something simpler than the Altronix MAXIMAL3RH?
Yes. The MAXIMAL3RH is a 6A, eight-output rack mount controller built for a full bank of openings. For a single door, the Securitron AQD1 is a 12/24VDC 1 amp switching supply, the SDC 620 Series is a 1 amp regulated and filtered low voltage supply with dual voltage selection, and the Command Access PS1 is a 24VDC linear supply with 1 amp output. Any of those handles one strike or small maglock without the multi-output distribution.
7) Can I use the Altronix MAXIMAL3RH to run motorized latch retraction exit devices?
For motorized latch retraction, the supply usually specified is one built for that inrush: the BEST RPSMLR2 Series is a power supply for motorized latch retraction exit devices. The MAXIMAL3RH is a general access power controller with eight fused 12/24VDC outputs at 6A. If the exit device manufacturer calls out an MLR-specific supply on the hardware schedule, match that call-out rather than substituting a general purpose controller.
8) What input power does the MAXIMAL3RH need at the rack?
Standard 115VAC 60Hz line power, which is why the unit is catalogued at 120V. That means a normal building receptacle or a dedicated 120V circuit at the rack, not a low voltage feed. No step down transformer is required ahead of it.
9) What else gives me eight outputs if the MAXIMAL3RH is more current than I need?
The RCI DKPS-2A is the closest eight output alternative, also 12/24VDC but rated 2A rather than 6A. It suits a smaller cluster of strikes or readers where the total draw is light. If you need the higher current for maglocks across several openings, stay with the 6A Altronix.
10) Does the Altronix MAXIMAL3RH come with battery backup, or do I need a different supply?
The MAXIMAL3RH is described as a multi-output power supply/charger converting a 115VAC 60Hz input into eight 12VDC or 24VDC outputs. If a standby battery is a stated requirement on your drawing, supplies listed with battery backup include the Adams Rite PS-1 regulated 1 amp 12/24VDC supply with battery backup, the Command Access PS204/204B at 2A 24VDC with battery backup, and the Detex 10-800 universal logic controller with a 120VAC/24VDC supply and battery backup.
11) What is the difference between the Altronix MAXIMAL3RH and the BEST PS161-6?
Both are 120V-input, 12/24V-output supplies rated at 6A - the MAXIMAL3RH takes 115VAC 60Hz in and provides eight fuse protected 12/24VDC outputs at 6A, and the BEST PS161-6 is a 120V input, 12/24V output supply with 6A capacity intended for delayed egress exit devices. The deciding factor is application: PS161-6 is aimed at delayed egress hardware, while the MAXIMAL3RH is a rack mount controller distributing that current across eight openings.
12) I need more than 6 amps at 12VDC - what should I look at instead of the Altronix MAXIMAL3RH?
The MAXIMAL3RH is rated 12/24VDC at 6A. For a higher single-voltage output, the Securitron AQS1210 is a switching power supply at 12 VDC 10 Amp. Note that it is a 12VDC supply, so it does not offer the 24VDC selection the MAXIMAL3RH provides, and it is not a multi-output access power controller - you would add distribution downstream.
13) Which supplies look like alternatives to the Altronix MAXIMAL3RH but will not do the same job?
A few in the same aisle are not substitutes. The ROFU 10305-LA is a power transfer hinge rated 1.5A at 42V - it moves power through the door, it does not generate it. The Command Access CAT Field Tester is a portable 12-24VDC tester that runs off DeWalt, Makita and Milwaukee batteries, for bench and field checks rather than permanent installation. The ROFU 9126T is a plug in mini power supply at 12VDC 1.5A with time delay, sized for a single device. None of these replace a 6A eight-output rack mount controller.
14) How does the Altronix MAXIMAL3RH compare to the Von Duprin PS902 for an exit device job?
The Von Duprin PS902 is a base power supply at 2A, 12/24 VDC field selectable for access control, carrying a Grade 1 rating, and it is the platform Von Duprin option modules build onto. The MAXIMAL3RH runs on a 115VAC 60Hz input and delivers eight fuse protected 12/24VDC outputs at 6A. If the hardware schedule names PS902 with specific option boards, stay with the PS902; if you need one chassis feeding many openings, the MAXIMAL3RH covers more doors from a single unit.
15) Can I use the MAXIMAL3RH for CCTV cameras as well as door hardware?
Yes. Altronix lists this platform for general use, CCTV, fire alarm and POIP as well as access control, so the same eight output chassis can feed cameras on a 12VDC rail. Just keep total camera and lock draw inside the 6A rating.
16) Is the MAXIMAL3RH suitable for a commercial building install?
It is a commercial grade access power controller, intended for multi door security systems in commercial and institutional buildings rather than residential use. Outputs are individually fuse protected so a short on one device does not drop the whole rack.
How fast can I get the Altronix MAXIMAL3RH delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix MAXIMAL3RH come with a warranty?
Absolutely. The Altronix MAXIMAL3RH is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix MAXIMAL3RH?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix MAXIMAL3RH from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!