Altronix TV1 Trove1 Backplane,...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$143.79
$126.01
Altronix TV1 Trove1 Backplane, HID VertX, Includes Mounting Hardware

Altronix TV1 Trove1 Backplane, HID VertX, Includes Mounting Hardware

(No reviews yet) Write a Review

Model: TV1

In Stock (leaves warehouse same day if ordered before 3pm ET)

$143.79
$126.01
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix TV1 – Frequently Asked Questions

1) What exactly is the Altronix TV1 Trove1 backplane, and does it come with mounting hardware?
The Altronix TV1 is a Trove1 backplane sized for HID VertX access control boards, and mounting hardware is included with it. A backplane is the pre-drilled mounting plate that goes inside a Trove enclosure so the access control panel and Altronix power gear land in known positions instead of being drilled in by hand on site.
2) Is the Altronix TV1 backplane a power supply on its own, or do I still need to order one?
The TV1 is the mounting backplane only. It is the plate your HID VertX board and Altronix power boards mount to, so the power supply, transformer and battery are ordered separately. If what you actually need is a standalone boxed supply rather than a panel integration plate, look at something like the Securitron AQL4 switching power supply (12/24VDC, 4/3A) or the Von Duprin PS902 base power supply (2A, 12/24VDC field selectable).
3) Will the TV1 backplane work with a non-HID panel, like Mercury or a standalone controller?
The TV1 is cut specifically for HID VertX boards. Trove backplanes are panel-specific, so a different controller brand needs the backplane made for that board rather than this one. Match the backplane to the panel you are installing.
4) I need power for motorized latch retraction exit devices. Is a Trove1 backplane the right buy?
No. Motor-driven latch retraction draws a high inrush and needs a supply built for it. The BEST RPSMLR2 Series is a power supply specifically for motorized latch retraction exit devices, and the BEST PS161-6 is sized for delayed egress exit devices with 120V input, 12/24V output and 6A capacity. The Altronix TV1 Trove1 backplane is the mounting platform for HID VertX access control boards, so it addresses panel consolidation rather than exit device motor loads.
5) Does the Altronix TV1 Trove1 backplane replace a standalone access control power supply?
No. The TV1 is a Trove1 backplane sized to mount HID VertX access control boards and the associated power hardware inside a Trove enclosure, and it ships with the mounting hardware to do it. It is an integration and mounting component, not a supply that produces DC output on its own. If what you actually need is a boxed DC source for locks and readers, look at a dedicated unit such as the RCI DKPS-2A, which provides 8 outputs at 12/24VDC and 2A, or the Von Duprin PS902 base power supply at 2A with field-selectable 12/24 VDC.
6) My access control panel is not HID VertX. What power options work for a generic multi-door system?
The Trove1 backplane in the TV1 is laid out specifically for HID VertX boards, so it will not match the hole pattern of another manufacturer's controller. For a panel-agnostic build, choose a supply by output instead: the RCI DKPS-2A offers 8 outputs at 12/24VDC and 2A for access control systems, the SDC 634 Series is a 4 amp regulated and filtered supply with dual voltage selection, and the Securitron AQS1210 is a 12 VDC switching supply rated 10 amps for heavier lock loads.
7) I am consolidating a door controller and multiple locked outputs into one cabinet. What should I be looking at besides the Trove backplane?
The Trove approach (TV1 backplane plus enclosure and Altronix power boards) makes sense when you want one HID VertX panel and its power distribution in a single cabinet. If you only need multi-door power distribution and no panel integration, a multi-output supply like the RCI DKPS-2A, which gives 8 outputs at 12/24VDC and 2A, covers that in one box. For a single opening, a small supply such as the SDC 620 Series 1 Amp regulated unit or the Command Access PS1 24VDC 1 Amp is the simpler buy.
8) What should I use instead of a Trove backplane if I only need to power one or two electric strikes?
A single-door or small-load job usually does not need a board-mounting backplane at all. For that scale, a compact regulated supply is the more direct route: the SDC 620 Series is a 1 amp regulated and filtered low voltage supply with dual voltage selection, the Command Access PS1 Series is a 24VDC linear supply with 1 amp output, and the Securitron AQD1 is a 12/24 VDC switching supply at 1 amp. The Altronix TV1 is aimed at consolidating HID VertX access control boards and power into one Trove enclosure, which is a larger, multi-door build.
9) If the spec calls for battery backup on the access control power, what units cover that?
Battery backup is a function of the supply, not of the Trove1 backplane the TV1 provides. Units that state backup include the Adams Rite PS-1, a regulated 1 amp 12/24 volt DC supply with battery backup, the Command Access PS204/204B linear supply at 2A 24VDC with battery backup, and the Detex 10-800 universal logic controller, which pairs a 120VAC/24VDC power supply with battery backup in one unit.
10) Which access control power products are UL listed if my inspector asks?
Among the access control power products in the same family, the Aiphone AC-PS1250 is described as a 12V DC 5A UL Listed supply for AC Series access control kits, the Command Access PS210 is a UL 6E/CSA linear supply at 1.5A 24VDC with boost circuitry, and the ROFU 9102-12D carries a UL designation on the 12VDC version with a 10/120VAC 60Hz input. The Altronix TV1 itself is the Trove1 backplane and mounting hardware for HID VertX boards rather than the listed power source.
11) What looks like an alternative to the Altronix TV1 but actually does something different?
Several items in the same aisle are easy to confuse with it. The ROFU 10305-LA is a tamper-resistant power transfer hinge rated 1.5A at 42V, which carries power through the door rather than distributing it in a cabinet. The Command Access CAT Field Tester is a portable 12-24VDC bench tool that runs off DeWalt, Makita and Milwaukee batteries. The Securitron BPSS is a boxed solar power supply for sites without line power. The Altronix TV1 is none of these: it is the Trove1 backplane and mounting hardware for HID VertX boards, running on a 120V system input.
12) Is the Altronix TV1 rated for commercial access control installs?
Yes, it is a commercial access control product, catalogued for 120V systems, which is the standard line input for the Altronix supplies that share the Trove enclosure with the VertX panel.
13) What enclosed power products are available if I want the supply and box together rather than a bare backplane?
The Locknetics LP Series is offered as a power supply with enclosure, and the Detex 10-800 Series packages a universal logic controller with a 120VAC/24VDC supply and battery backup in one unit. The Securitron AQL4 is a switching supply rated 12/24VDC at 4/3 amps. The Altronix TV1 supplies the Trove1 backplane and mounting hardware for HID VertX boards, so the enclosure and the power modules are selected separately in that approach.
14) For a commercial access control job, which of these is graded?
The Von Duprin PS902 base power supply, a 2A 12/24 VDC field-selectable unit for access control, carries a Grade 1 designation. The Altronix TV1 Trove1 backplane is a commercial access control component that provides the HID VertX board mounting platform and hardware, and it operates within a 120V system.
How fast can I get the Altronix TV1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix TV1 come with a warranty?
Absolutely. The Altronix TV1 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix TV1?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix TV1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!