American Standard 16 x 29-Inch Stainless Steel Kitchen Sink Grid - AMS-7434000

The 7434000 grid is built for the American Standard Quince 25 x 22 inch single bowl kitchen sinks, specifically models 77SB25223.308 and 77SB25224.310. It is sized to those bowls at 16 x 29 inches. If your bowl is a different model or a different interior size, the grid will not sit correctly on the bottom.

Not reliably. The 16 x 29 inch American Standard grid is dimensioned to the interior of the Quince 77SB25223.308 and 77SB25224.310 bowls, and a 25 x 22 inch outside dimension from another manufacturer can have a very different bowl interior, radius, and drain position. Measure the inside bottom of your bowl before treating this as a universal fit.

Feet and side bumpers are included. The grid is polished stainless steel with coordinating plastic feet and plastic side bumpers, so the stainless does not ride directly on the bowl bottom or against the bowl walls. Nothing else is needed to set it in place.

If those units have the Quince 25 x 22 single bowl in either 77SB25223.308 or 77SB25224.310, yes, the 16 x 29 grid ordered as 7434000.075 covers both sink models. It is a single stainless configuration, so there is no finish or size decision to track across the fleet.

A bottom grid keeps pots, cast iron, and dishware off the bowl floor, which is where scratching and finish wear show up first in a rental unit or a commercial break room. The plastic feet and side bumpers on this American Standard grid are what keep the stainless frame from contacting the bowl. Water drains under the grid rather than pooling under a pan.