American Standard Activate Hos...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$73.18
$17.43
American Standard Activate Hose Assembly with Lock Sleeves - AMS-7381553-201

American Standard Activate Hose Assembly with Lock Sleeves - AMS-7381553-201

(No reviews yet) Write a Review

Model: 7381553-201.0070A
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$73.18
$17.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Activate Hose Assembly with Lock Sleeves
  • Removal:
  • Turn off the water supply and flush the toilet to empty the tank
  • Remove the tank cover
  • Open the cover on the battery compartment and disconnect the battery cable from the battery terminal
  • Pull the locking collar off of the hose assembly using a twisting motion then remove the hose from the end of the actuator
  • Repeat this step to remove the hose assembly from the flush tower
  • Make sure the O-ring is reinstalled on the barb at the end of the actuator and on flush tower elbow
  • Re -INSTALL :
  • Remove the black rubber caps on both ends of the new hose assembly

Manufacturer Resources

Product Specs

Product Type:
Hose Assembly
Product Group:
Washroom/Bath Accessories
Product Subgroup:
Parts and Accessories
Department:
Plumbing
Parts and Accessories Type:
Supply Hose
Application:
Toilet

American Standard 7381553-201.0070A – Frequently Asked Questions

1) What does the American Standard Activate hose assembly actually connect to inside the toilet tank?
It is the internal hose that runs between the actuator and the flush tower elbow on an American Standard Activate touchless toilet. One end pushes onto a barb at the actuator, the other onto the flush tower elbow, and each end is held by a locking collar (lock sleeve). It is an internal trip/actuation hose, not the braided supply line that runs from the shutoff valve to the tank fill valve.
2) Do I need new O-rings when I install this hose assembly?
The O-rings stay with the toilet, not the hose. Before you put the new hose on, check that the O-ring is in place on the barb at the end of the actuator and on the flush tower elbow. If either one came off with the old hose, reinstall it. Missing an O-ring here is the usual cause of a weak or dead flush after the swap.
3) Do I have to shut the water off to replace the Activate flush hose?
Yes. Shut off the supply and flush the toilet to empty the tank before you start, then pull the tank cover. Next step is the battery: open the battery compartment cover and disconnect the battery cable from the terminal so the actuator cannot fire while you are working on it.
4) How do the lock sleeves come off without breaking the fitting?
Twist, do not pry. The locking collar pulls off the hose assembly with a twisting motion, then the hose comes off the actuator barb. Repeat the same twist-and-pull at the flush tower end. Yanking the collar straight off is what cracks these.
5) My new American Standard hose has black rubber caps on the ends - do those stay on?
No, they are shipping plugs. Pull the black rubber caps off both ends of the new hose assembly before you push it onto the actuator barb and the flush tower elbow. Leaving one on will block actuation entirely.
6) What is the part number for the American Standard Activate hose assembly with lock sleeves?
Order it as American Standard 7381553-201.0070A. It ships as a single configuration with no finish option, since the hose sits inside the tank where nothing shows.
7) Our building has several Activate toilets that stopped flushing on the button - is the hose the part to order?
If the batteries are good and the actuator still clicks but the tower does not lift, the hose between the actuator and flush tower is the usual suspect, and this assembly (7381553-201.0070A) is that part with both lock sleeves included. It is a tank-internal replacement on American Standard Activate toilets, so one part number covers every Activate opening in the building. Worth keeping a couple on the shelf if you maintain a fleet of them.
How fast can I get the American Standard 7381553-201.0070A delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 7381553-201.0070A come with a warranty?
Absolutely. The American Standard 7381553-201.0070A is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 7381553-201.0070A?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the American Standard 7381553-201.0070A from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!