American Standard Baby Devoro 10-1/4-Inch Height Elongated Bowl - AMS-3128001

No. The Baby Devoro 3128001 is the bowl only, floor mount, and it ships less seat. You order the tank and a child-size elongated seat separately to complete the fixture.

It sets on a 10 inch (254 mm) rough-in, measured from the finished wall to the center of the closet flange. If your existing drain is roughed at the more common 12 inches, this bowl will sit too far off the wall and you need a 12 inch rough-in model instead.

American Standard states the Baby Devoro bowl is ADA and TAS compliant. Rim height is 10-1/4 inches, which is the child-height dimension used in pre-K and daycare restrooms rather than an adult accessible fixture.

It is a High Efficiency Toilet bowl that operates anywhere in the 1.28 to 1.6 gpf range (4.8 to 6.0 Lpf), so it works with either a 1.28 gpf HET tank or a 1.6 gpf tank. At 1.28 gpf it carries a MaP score of 500 grams.

The Baby Devoro 3128001 is the elongated bowl. Elongated gives a longer seating surface and is generally easier to clean around, but it projects further into the room, which matters in a tight stall or a compartment layout with fixed partitions. If your stall depth is limited, measure the projection you have available before committing to elongated.

No. It is a floor-mount bowl and sets on a standard closet flange with closet bolts. For a wall hung installation you need a wall mount bowl and a carrier in the chase, which is a different fixture and a different rough-in entirely.

A fully glazed trapway gives a smooth vitreous china surface through the entire waste passage, which reduces the drag and buildup that causes repeat clogs in facilities with heavy use and heavy paper. The bowl also has a sanitary dam at the tank joint to cut buildup between bowl and tank, which is one less crevice to scrub on a maintenance route.

White is the finish offered, MPN 3128001.02, and two color-matched bolt caps are included with the bowl so the closet bolts finish out in the same white.