American Standard Delancey 30-Inch Single Bowl Kitchen Sink Grid - AMS-8432000

The Delancey 30-inch single bowl sink grid is made for two cast iron bowls: the Delancey 30 inch single bowl cast iron apron kitchen sink (77SB30220A.308) and the Delancey 30 inch single bowl cast iron kitchen sink (77SB30190.308). It is sized to those bowl interiors, so it is not a general purpose grid for other 30 inch sinks.

The grid is a separate accessory. If you are specifying a Delancey 30 inch single bowl cast iron sink, either the apron front 77SB30220A.308 or the standard 77SB30190.308, add 8432000.075 to the order to get the matching bottom grid. Property managers standardizing kitchens usually spec the sink and grid together on the same line so the two ship as a set.

No. The polished stainless grid rides on coordinating plastic feet with plastic side bumpers, so the steel never sits directly on the sink glaze or touches the side walls. That is the point of the grid, protecting the porcelain enamel surface of the cast iron bowl from pans and dropped cookware.

Order it as American Standard 8432000.075. The .075 suffix is the stainless steel finish, which is the only finish this grid is built in.

Not reliably. This grid is dimensioned for the Delancey 30 inch cast iron bowls (77SB30220A.308 and 77SB30190.308), and bowl interiors differ between materials and series even at the same nominal 30 inch cabinet size. If your sink is a different model, match a grid to that sink's own accessory listing rather than by cabinet width.

It is polished stainless, not a vinyl or epoxy coated wire rack. The only non-metal parts are the plastic feet and the side bumpers that keep it off the bowl surface. Stainless holds up better than coated wire in a commercial or multi-family kitchen where the coating eventually chips and rusts through.