You may also like
American Standard Deluxe 5-1/8-Inch Diverter Tub Spout - AMS-8888022
Model: AMS-8888022
Deluxe 5-1/8-Inch Diverter Tub SpoutCast Brass Construction – Strong and durableLimited Lifetime Warranty – Function & Finish1/2" IPS Connection. 5 1/8” length to center of stream straightener
American Standard
$141.19
$93.59
American Standard Diverter Slip-On Tub Spout - AMS-22650
Model: AMS-22650
Diverter Slip-On Tub SpoutCompatible with many American Standard shower trim kitsDurable brass construction5.688" (144mm) projection from wall2.875" (72mm) height from spout to diverterSlip on mount
American Standard
Starting at
$77.89
$30.50
Deluxe 4-Inch Diverter Tub Spout
- All Metal Construction
- Limited Lifetime Warranty – function & finish
- 1/2" (13 mm) IPS connection
- 4” length to center of stream straightener
Manufacturer Resources
Spec Sheet
Product Specs
- Product Type:
- Tub Spout
- Product Group:
- Washroom/Bath
- Product Subgroup:
- Bathtubs
- Department:
- Plumbing
- Luxury/Non Luxury:
- Non Luxury
- Residential Commercial:
- Residential
American Standard 8888055.002 – Frequently Asked Questions
1) Does the American Standard 8888055 tub spout thread on, or does it slip over copper tubing?
It threads on. The Deluxe 4-inch diverter tub spout uses a 1/2 inch (13 mm) IPS connection, so it needs a threaded nipple coming out of the wall. If your rough-in is bare 1/2 inch copper stub-out, this is the wrong spout for that opening. You would need a slip-fit style spout instead, or add a threaded adapter to the stub.
2) Does this American Standard spout have a built-in diverter for a shower head?
Yes. It is a diverter tub spout, so the pull-up knob on top redirects flow from the spout to the shower riser. That makes it the right part for a tub-shower combination running off a single valve. For a tub-only installation with no shower head, a non-diverter spout is what you want.
3) Will a 4-inch tub spout reach far enough past my tub apron?
The 4 inch figure is the length to the center of the stream straightener, measured from the wall end of the spout. That is a short-to-standard reach, fine for a typical tub set close to the finished wall. If your valve sits behind thick tile or a thicker wall build-up, measure from the face of the finished wall to where you want water landing before committing, since a 4 inch body may put the stream close to the tub wall.
4) Is the 8888055 tub spout metal or plastic inside?
All metal construction, per American Standard. For rental turns, hotels, and multi-family where the diverter knob gets yanked daily, that matters more than finish choice, since plastic-bodied spouts are the common failure point.
5) What finishes does the American Standard Deluxe diverter tub spout come in for matching other bathroom trim?
Two: polished chrome (model 8888055.002) and brushed nickel (model 8888055.295). If you are standardizing a building, order by that suffix so every unit matches the valve trim and shower head already installed.
6) Can I use this spout with any brand's tub and shower valve?
The spout is independent of the valve trim. Any 1/2 inch IPS threaded nipple takes it, regardless of who made the valve body. What you should match is appearance, not function, so pick chrome or brushed nickel to suit the handle and shower head. The diverter lives in the spout itself, so it does not depend on the valve having a diverter cartridge.
7) My shower only trickles when I pull the diverter up. Is replacing the tub spout the fix?
Usually, yes. On a spout-mounted diverter like this Deluxe 4-inch model, the diverter gate wears and stops sealing, so water keeps dumping out the spout instead of going up to the head. Swapping the whole spout is the repair, since the diverter is not serviceable separately. Confirm your existing spout threads onto a 1/2 inch IPS nipple before ordering.
How fast can I get the American Standard 8888055.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 8888055.002 come with a warranty?
Absolutely. The American Standard 8888055.002 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 8888055.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the American Standard 8888055.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.