American Standard Edgewater 33...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$703.09
American Standard Edgewater 33 x 22-Inch Stainless Steel 1-Hole Dual Mount Single-Bowl ADA Kitchen Sink - AMS-18SB6332211

American Standard Edgewater 33 x 22-Inch Stainless Steel 1-Hole Dual Mount Single-Bowl ADA Kitchen Sink - AMS-18SB6332211

(No reviews yet) Write a Review

Model: 18SB6332211.075
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$703.09
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Edgewater 33 x 22-Inch Stainless Steel 1-Hole Dual Mount Single-Bowl ADA Kitchen Sink
  • Fabricated single-bowl stainless steel kitchen sink
  • 18-gauge stainless steel
  • 6" depth with offset drain
  • Zero radius corners
  • Dual mount (top or under) installation
  • Single hole
  • Features SoundSecure+ sound pads
  • Features StoneLock undercoating
  • 36" (914 mm) cabinet required
  • Limited Lifetime Warranty;Nominal Dimensions: 33" x 22" x 6" (838 x 559 x 152 mm);Bowl Size: 30-1/4" (768 mm) wide 16-1/2" (420 mm) front to back 6" (152 mm) deep

Manufacturer Resources

Product Specs

Product Type:
Kitchen Sink
Product Group:
Kitchen
Product Subgroup:
Sinks
Family:
EDGEWATER
Luxury/Non Luxury:
Luxury
Residential Commercial:
Residential
Product Length:
35.678
Product Height:
10.625
Product Weight:
31.028
Product Width:
25.125
Department:
Plumbing

American Standard 18SB6332211.075 – Frequently Asked Questions

1) Can the Edgewater 18SB6332211 be installed undermount, or is it drop-in only?
Both. It is a dual mount sink, so it can be set top mount on the counter deck or mounted under a solid surface like granite or quartz. Undermount installs need the counter fabricator to cut and polish the opening and supply clips or rails; those are not part of the sink.
2) How many faucet holes does the Edgewater 33 x 22 stainless sink have?
One. It is drilled single hole, so it takes a single-hole faucet, typically a pulldown or pullout. If you want a separate soap dispenser, filtered water tap, or air switch for a disposer, you will need a deck plate that covers the extra positions or you will have to drill the countertop, since there are no accessory holes in the sink.
3) Is 18-gauge stainless heavy enough for a busy kitchen sink?
18-gauge is the standard weight for a quality residential stainless sink, thicker and quieter than the 20 and 22 gauge sinks common at the low end. The Edgewater also carries SoundSecure+ sound pads and StoneLock undercoating on the bowl underside, which cut the drumming and the condensation drip you get on a bare bowl.
4) What are the actual usable bowl dimensions on the Edgewater single-bowl sink?
The bowl runs 30-1/4 inches wide (768 mm), 16-1/2 inches front to back (420 mm), and 6 inches deep (152 mm). The zero radius corners mean the walls meet the bottom at a near square, so you get more flat working area than a comparable sink with heavily coved corners, though the tight corners want a bottom grid if you are washing large pots.
5) Does the Edgewater kitchen sink come with a strainer, grid, or mounting hardware?
The sink itself is what you get: the 18-gauge fabricated bowl with the sound pads and undercoating already applied. Budget separately for a basket strainer or disposer flange, a bottom grid if you want one, the tailpiece and trap, and, for an undermount install, the clips your fabricator specifies.
6) Is this American Standard Edgewater sink meant for residential or commercial kitchens?
It is classed as a residential kitchen sink. For multi-family units, remodels, and accessible residential baths and kitchenettes it is the right category. A commercial foodservice application needing NSF-listed fabrication is a different product class.
7) What is the exact model number to order the Edgewater 33 x 22 ADA sink in stainless?
The manufacturer part number is 18SB6332211.075, the .075 suffix being the stainless steel finish. It is sold in that one finish only.
How fast can I get the American Standard 18SB6332211.075 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 18SB6332211.075 come with a warranty?
Absolutely. The American Standard 18SB6332211.075 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 18SB6332211.075?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the American Standard 18SB6332211.075 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!