American Standard Monterrey 8-...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$316.36
$266.36
American Standard Monterrey 8-Inch Widespread Gooseneck Faucet With Wrist Blade Handles 1.5 gpm/5.7 Lpm With Limited Swivel - AMS-6545170

American Standard Monterrey 8-Inch Widespread Gooseneck Faucet With Wrist Blade Handles 1.5 gpm/5.7 Lpm With Limited Swivel - AMS-6545170

(No reviews yet) Write a Review

Model: 6545170.002
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$316.36
$266.36
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Monterrey 8-Inch Widespread Gooseneck Faucet With Wrist Blade Handles 1.5 gpm/5.7 Lpm With Limited Swivel
  • Spout swivel is restricted to 140 degrees to eliminate spills behind the sink
  • Gooseneck spout with 5" (127 mm) reach
  • Cast brass valve bodies with 8" (203 mm) rigid copper connections
  • 1/2" (13 mm) male threaded inlet shanks with brass coupling nuts
  • Washerless ceramic disc valves assure drip-free performance
  • Vandal-resistant wrist blade handles with red and blue indicators
  • 1.5 gpm/5.7 Lpm pressure-compensating aerator

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Gooseneck Faucet
Product Group:
Washroom/Bath Accessories
Product Subgroup:
Parts and Accessories
Department:
Plumbing
Parts and Accessories Type:
Faucet
Application:
Faucet
Product Color:
Chrome
Country of Origin:
Mexico

American Standard 6545170.002 – Frequently Asked Questions

1) Will the American Standard Monterrey 6545170 gooseneck faucet fit a standard 8-inch widespread three-hole sink?
Yes. The Monterrey 6545170 is an 8 inch widespread faucet, so it mounts in the standard three-hole deck with 8 inch center-to-center spread between the handle holes and the spout in the middle. The valve bodies come with 8 inch rigid copper connections tying the two bodies to the spout.
2) What supply connection do I need for the Monterrey 6545170 faucet?
The inlet shanks are 1/2 inch male thread with brass coupling nuts, so they mate to standard 1/2 inch supply risers or flex connectors. No adapter needed on a typical 1/2 inch stop.
3) Why does the spout on this wrist blade faucet only swing part way?
The swivel on the Monterrey gooseneck is deliberately limited to 140 degrees so the spout cannot be turned past the back of the sink and dump water on the counter or floor. It is a behavior you want in a public restroom or a clinical hand sink, not a defect.
4) Is 5 inches of spout reach enough to clear the bowl on my lavatory?
The gooseneck spout reaches 5 inches (127 mm) from the center of the spout base. On a standard lavatory that puts the stream over the bowl; on a deep or wide commercial sink where the faucet sits well back from the bowl, measure from your spout hole to the drain before you commit.
5) What flow rate does the Monterrey 6545170 deliver, and will it hold that flow on a low-pressure line?
It ships with a 1.5 gpm (5.7 Lpm) pressure-compensating aerator, which means the flow stays near 1.5 gpm as inlet pressure varies instead of surging on high pressure risers. That is the rate facilities usually spec for public lavatories.
6) Are the wrist blade handles on this American Standard faucet suitable for a public restroom that gets abused?
They are vandal-resistant wrist blade handles with red and blue temperature indicators, and the valve bodies are cast brass. Wrist blades are what you put in schools, clinics and public washrooms because a forearm or elbow can operate them with gloved or full hands.
7) Does the Monterrey 6545170 come with a drain or pop-up assembly?
What is described is the faucet itself: gooseneck spout, two cast brass valve bodies with 8 inch rigid copper connections, wrist blade handles, and the 1.5 gpm aerator. Plan on sourcing the drain, supply risers and stops separately for the rough-in.
8) Does this faucet use washers that will need replacing, or cartridges?
Washerless ceramic disc valves, not rubber washers. For an MRO crew standardizing a building, that means no seat-and-washer rebuilds, and drip complaints get handled by swapping the ceramic cartridge instead.
9) What finish and part number should I order for the Monterrey gooseneck wrist blade faucet?
It is sold in chrome, manufacturer part number 6545170.002. That is the only finish in the Monterrey 6545170 gooseneck wrist blade configuration, so ordering across a fleet of restrooms is a single line item.
How fast can I get the American Standard 6545170.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 6545170.002 come with a warranty?
Absolutely. The American Standard 6545170.002 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 6545170.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the American Standard 6545170.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!