American Standard NextGen Sele...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$407.54
$401.53
American Standard NextGen Selectronic Touchless Faucet, Base Model With Above-Deck Mixing, 0.35 gpm/1.3 Lpm - AMS-775B203

American Standard NextGen Selectronic Touchless Faucet, Base Model With Above-Deck Mixing, 0.35 gpm/1.3 Lpm - AMS-775B203

(No reviews yet) Write a Review

Model: 775B203.002

In Stock (leaves warehouse same day if ordered before 3pm ET)

$407.54
$401.53
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
NextGen Selectronic Touchless Faucet, Base Model With Above-Deck Mixing, 0.35 gpm/1.3 Lpm
  • POWER KIT MUST BE PURCHASED SEPARATELY
  • Touchless operation limits the spread of germs
  • Above-deck mixing with removable handle
  • Dual inlets for hot and cold water
  • Clean, integrated design. No control box below deck
  • Easy installation and maintenance: Faucet installs from the top. All serviceable parts are easily accessible
  • Auto Purge: Periodically purges stagnant water
  • Safety Timer: Automatically turns water off after 55 seconds
  • Vandal-resistant 0.35 gpm/1.3 Lpm pressure-compensating multi-laminar spray
  • Optional deck plate for 4-inch (102 mm) or 8-inch (203 mm) centers available

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Touchless Faucet
Product Group:
Kitchen
Product Subgroup:
Faucets
Department:
Plumbing
Country of Origin:
Mexico
Luxury/Non Luxury:
Non Luxury
Residential Commercial:
Commercial

American Standard 775B203.002 – Frequently Asked Questions

1) Does the American Standard NextGen Selectronic touchless faucet come with a power supply?
No. The power kit is sold separately on the NextGen Selectronic 775B203, so you have to order it alongside the faucet or the sensor has nothing to run on. Budget for it on every unit when you are specifying a run of restrooms.
2) How do you set the water temperature on a touchless faucet with no control box under the deck?
Mixing happens above the deck on this NextGen Selectronic faucet, using a removable handle at the faucet itself. That is the point of the base model: there is no below-deck control box, and hot and cold both feed the faucet through dual inlets. The removable handle also lets a facility pull the handle after setting temperature so users cannot change it.
3) Will this touchless faucet cover a 4-inch or 8-inch center drilling?
Only with the optional deck plate. The NextGen Selectronic base model mounts in a single hole; American Standard offers a deck plate for 4-inch (102 mm) or 8-inch (203 mm) centers, ordered separately. If your lavatories are drilled 3-hole, add the plate for the matching center spread.
4) What flow rate does the American Standard NextGen Selectronic faucet deliver?
0.35 gpm (1.3 Lpm) through a vandal-resistant, pressure-compensating multi-laminar spray. Pressure compensating means the flow stays consistent as building pressure swings, which matters when a bank of lavatories all run at once. At 0.35 gpm this is a low-flow public restroom faucet, not a fill-a-bucket kitchen faucet.
5) How long does the water run before it shuts off, and does it handle stagnant water?
A safety timer shuts the water off automatically after 55 seconds, so a covered sensor or a jammed condition cannot flood a restroom. An auto purge feature periodically runs the faucet to clear stagnant water from the line, which is the feature facility managers look for in low-use restrooms and buildings with waterborne pathogen management plans.
6) Do I have to get under the sink to install or service this Selectronic faucet?
Installation is from the top of the deck, and the serviceable parts are reachable without crawling into the cabinet. With no below-deck control box, there is less under there to fight with, which is the main reason maintenance crews pick this configuration for retrofits in tight vanities.
7) Is this the right faucet for a commercial restroom or for a kitchen sink?
This is a hands-free lavatory faucet built for public and commercial restrooms, where touchless operation limits germ transfer and a 0.35 gpm spray meets low-flow requirements. For a kitchen sink where you need volume to fill pots, 0.35 gpm is far too restrictive; choose a standard kitchen faucet instead.
8) What finishes does the American Standard 775B203 touchless faucet come in?
Two: polished chrome (775B203.002) and brushed nickel (775B203.295). Chrome is the usual choice for standardizing across institutional restrooms; brushed nickel is the one to match if the rest of your accessories are already in a satin finish.
How fast can I get the American Standard 775B203.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 775B203.002 come with a warranty?
Absolutely. The American Standard 775B203.002 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 775B203.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the American Standard 775B203.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!