American Standard Paradigm Sel...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$424.33
$420.73
American Standard Paradigm Selectronic Touchless Faucet, Base Model With Above-Deck Mixing, 0.35 gpm/1.3 Lpm - AMS-702B203

American Standard Paradigm Selectronic Touchless Faucet, Base Model With Above-Deck Mixing, 0.35 gpm/1.3 Lpm - AMS-702B203

(No reviews yet) Write a Review

Model: 702B203.002
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$424.33
$420.73
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Paradigm Selectronic Touchless Faucet, Base Model With Above-Deck Mixing, 0.35 gpm/1.3 Lpm
  • POWER KIT MUST BE PURCHASED SEPARATELY
  • Touchless operation limits the spread of germs
  • Above-deck mixing with removable handle
  • Dual inlets for hot and cold water
  • Clean, integrated design. No control box below deck
  • Easy installation and maintenance: Faucet installs from the top. All serviceable parts are easily accessible
  • Auto Purge: Periodically purges stagnant water
  • Safety Timer: Automatically turns water off after 55 seconds
  • Vandal-resistant 0.35 gpm/1.3 Lpm pressure-compensating multi-laminar spray
  • Optional deck plate for 4-inch (102 mm) or 8-inch (203 mm) centers available

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Touchless Faucet
Product Group:
Kitchen
Product Subgroup:
Faucets
Family:
SELECTRONIC
Product Length:
14.606
Product Height:
3.228
Product Weight:
5.049
Product Width:
9.449
Department:
Plumbing
Country of Origin:
Mexico
Luxury/Non Luxury:
Non Luxury
Residential Commercial:
Commercial

American Standard 702B203.002 – Frequently Asked Questions

1) Does the American Standard Paradigm Selectronic touchless faucet come with a power supply?
No. The power kit for the Paradigm Selectronic 702B203 is sold separately and has to be ordered alongside the faucet. Budget for it on the same purchase order, because without it the faucet will not operate once it is mounted.
2) Can I set the water temperature on the Paradigm Selectronic touchless faucet, or is it a single supply?
It mixes. The Paradigm Selectronic base model has dual inlets for hot and cold and above-deck mixing with a removable handle, so the temperature is set at the deck rather than under the counter. Pulling the handle off after commissioning locks the setting, which is what most facility managers do in public restrooms.
3) Will this touchless faucet fit a sink drilled for 4 inch or 8 inch centers?
The Paradigm Selectronic 702B203 is a single-hole faucet, and an optional deck plate is available to cover 4 inch (102 mm) or 8 inch (203 mm) center drillings. Order the deck plate separately if you are replacing a centerset or widespread faucet on an existing three-hole sink.
4) Is the Paradigm Selectronic faucet rated for commercial restroom use?
Yes, it is a commercial faucet. Along with the touchless sensor it uses a vandal-resistant 0.35 gpm / 1.3 Lpm pressure-compensating multi-laminar spray and a safety timer that shuts the water off after 55 seconds, both of which matter in high-traffic public restrooms where a stuck-on faucet floods the room.
5) Do I need clearance under the sink for a control box with this touchless faucet?
No below-deck control box is used. Everything is integrated into the faucet body, it installs from the top, and the serviceable parts stay accessible from above. That is useful on shallow cabinets or where an ADA knee-space panel leaves no room for a box.
6) What flow rate does the Paradigm Selectronic touchless faucet deliver, and is it low enough for a water conservation spec?
It runs at 0.35 gpm / 1.3 Lpm through a pressure-compensating multi-laminar spray, so output stays consistent across supply pressures. That is at the low end for lavatory faucets and is typically specified where a project is chasing water-use reduction targets.
7) How does the Paradigm Selectronic handle stagnant water in a low-use restroom?
An auto purge cycle runs periodically to flush stagnant water out of the faucet. That matters in schools, seasonal buildings, and healthcare spaces where fixtures sit unused for long stretches and water quality programs call for regular flushing.
8) What finishes is the American Standard 702B203 touchless faucet available in?
Two: polished chrome (702B203.002) and brushed nickel (702B203.295). Chrome is the usual pick for standardizing across a facility; brushed nickel suits hospitality and higher-finish restrooms.
9) What are the dimensions and weight of the American Standard 702B203 faucet?
Listed at 14.606 x 9.449 x 3.228 inches, weighing 5.049 lb. Use those figures for carton planning and to confirm the spout clears the sink and backsplash on a retrofit.
How fast can I get the American Standard 702B203.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 702B203.002 come with a warranty?
Absolutely. The American Standard 702B203.002 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 702B203.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the American Standard 702B203.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!