Selectronic Cast Touchless Metering Faucet, Base Model, 0.35 gpm/1.3 Lpm
- SIMPLIFIED MODULAR PLATFORM: Choose faucet style, control box with solenoid or thermostatic mixing valve, and choice of power supply to create the precise combination for every installation and make ordering easy. Each component is sold separately.
- DEPENDABLE ACTIVATION: Infrared sensor detects hand motion to turn water on and off and can be programmed with optional remote control
- AUTO PURGE: Faucet can be programmed to open at a pre-determined time after last use to purge the faucet and water lines of stagnant water
- AUTO SHUT-OFF: Safety timer turns faucet off after 55 seconds to avoid overflow and water waste
- SINGLE-HOLE INSTALLATION: Can also accommodate multi-hole installation with optional 4-in. or 8-in. deck plates, sold separately
- COMPATIBILITY CHOICES: Choose solenoid or mixing valve control box, and 5 power options
Manufacturer Resources
Product Specs
- Product Type:
- Metering Faucet
- Product Group:
- Kitchen
- Product Subgroup:
- Faucets
- Family:
- SELECTRONIC
- Luxury/Non Luxury:
- Non Luxury
- Residential Commercial:
- Commercial
- Product Length:
- 17.126
- Product Height:
- 4.252
- Product Weight:
- 4.233
- Product Width:
- 10.394
- Department:
- Plumbing
American Standard 605B114.002 – Frequently Asked Questions
1) Does the American Standard Selectronic 605B114 touchless faucet come with everything needed to run water, or do I have to order more parts?
The faucet body alone is what ships. Selectronic is a modular platform: you pick the faucet, then a control box (solenoid or thermostatic mixing valve), then a power supply, and each of those is a separate order. Budget for all three lines on the purchase order or the faucet will arrive with no way to actuate.
2) Can the 605B114 Selectronic faucet mount on a 3-hole sink deck?
It is built for single-hole mounting, but it adapts to 4 inch or 8 inch center multi-hole decks with an optional deck plate. The deck plate is ordered separately, so specify it up front if you're replacing a widespread or centerset faucet.
3) We have restrooms that sit unused for weeks. Can this faucet flush stagnant water on its own?
Yes, auto purge handles that. The faucet can be programmed to open at a set interval after the last use to clear stagnant water from the faucet and the supply lines, which matters in schools, seasonal buildings and low-traffic wings with waterborne pathogen concerns.
4) Do I need a mixing valve with the Selectronic faucet, or is the solenoid box enough?
That's the control box decision. A solenoid box just opens and closes the water, so temperature is whatever your supply delivers, which is fine when a master tempering valve already serves the restroom. The thermostatic mixing valve box blends hot and cold at the fixture and is the choice where each lavatory has to control its own outlet temperature. Either way the box is ordered separately from the faucet.
5) Is 0.35 gpm enough flow for a commercial restroom lavatory?
0.35 gpm (1.3 Lpm) is a metering-style flow meant for handwashing in commercial restrooms, and this faucet is classed as a commercial product, not residential. It is not a fill faucet, so if the fixture is used for filling buckets or mop sinks, pick a higher-flow model instead.
6) How does the Selectronic touchless faucet shut off if someone blocks the sensor?
A safety timer closes the valve after 55 seconds of continuous run, which is what keeps a taped-over or obstructed sensor from flooding the basin. Activation itself is by infrared sensor reading hand motion, on and off.
7) How much room do I need above the sink and behind it for this Selectronic faucet?
The unit measures 17.126 x 10.394 x 4.252 inches and weighs 4.233 pounds. Check the height figure against any backsplash-mounted mirror or shelf, and account for the control box and power supply being separate boxes that need space below the deck.
8) What are my power options for this touchless faucet?
Five power configurations are offered across the Selectronic platform, and the one you pick ships separately from the faucet. Decide it with the electrician before the rough-in, since whether you're pulling low-voltage to the vanity or relying on a self-contained supply changes what gets stubbed out under the sink.
9) Can I adjust the sensor range without pulling the faucet apart?
Settings are programmable through an optional remote control, so range and timing changes are made at the fixture without disassembly or shutting down the line. The remote is not included with the faucet.
10) What finish does the 605B114 Selectronic metering faucet come in?
Chrome, ordered as 605B114.002. That is the only finish this model is built in, so if you're standardizing a building on brushed nickel or matte black trim, this cast Selectronic body won't match.
How fast can I get the American Standard 605B114.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 605B114.002 come with a warranty?
Absolutely. The American Standard 605B114.002 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 605B114.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the American Standard 605B114.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.