American Standard Paradigm Sel...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$398.74
$391.93

American Standard Paradigm Selectronic Touchless Faucet, Base Model, 0.5 gpm/1.9 Lpm - AMS-702B105

(No reviews yet) Write a Review

Model: 702B105.002
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$398.74
$391.93
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Paradigm Selectronic Touchless Faucet, Base Model, 0.5 gpm/1.9 Lpm
  • POWER KIT MUST BE PURCHASED SEPARATELY
  • Touchless operation limits the spread of germs
  • Single inlet for cold or tempered water
  • Clean, integrated design. No control box below deck
  • Easy installation and maintenance: Faucet installs from the top. All serviceable parts are easily accessible
  • Auto Purge: Periodically purges stagnant water
  • Safety Timer: Automatically turns water off after 55 seconds
  • Vandal-resistant 0.5 gpm/1.9 Lpm pressure-compensating multi-laminar spray
  • Optional deck plate for 4-inch (102 mm) or 8-inch (203 mm) centers available
  • Lead-Free: Faucet contains ≤ 0.25% total lead content by weighted average

Manufacturer Resources

Product Specs

Product Type:
Touchless Faucet
Product Group:
Kitchen
Product Subgroup:
Faucets
Family:
SELECTRONIC
Luxury/Non Luxury:
Non Luxury
Residential Commercial:
Commercial
Product Length:
14.606
Product Height:
3.228
Product Weight:
5.049
Product Width:
9.449
Department:
Plumbing

American Standard 702B105.002 – Frequently Asked Questions

1) Does the American Standard Paradigm Selectronic touchless faucet come with a power supply?
No. The power kit for the Paradigm Selectronic 702B105 is sold separately and has to be ordered alongside the faucet. Budget for it on the requisition, because the faucet will not operate without it.
2) Can I run hot and cold to this faucet and mix at the spout?
No mixing at the faucet. The Paradigm Selectronic base model has a single inlet, so it takes either cold water or tempered water from a thermostatic mixing valve upstream. If you want warm water at the spout, the mixing has to happen before the faucet.
3) Will this touchless faucet cover the three holes in my existing 4-inch centerset sink?
Not by itself. The Paradigm Selectronic is a single-hole faucet, but American Standard offers an optional deck plate for 4-inch (102 mm) or 8-inch (203 mm) centers that covers the outer holes. Order the deck plate separately if you are replacing a centerset or widespread faucet.
4) Is there a control box that has to be mounted under the sink?
No below-deck control box. The electronics are integrated into the faucet body and the unit installs from the top, so there is nothing to fish or mount in the cabinet. Serviceable parts stay accessible from above, which matters in restroom vanities with tight or locked-in undersink space.
5) What flow rate does the Paradigm Selectronic faucet deliver, and is it enough for a public restroom lavatory?
It runs 0.5 gpm (1.9 Lpm) through a pressure-compensating multi-laminar spray, so output holds steady as building pressure swings. That is the standard public lavatory flow rate for water-conserving commercial specs, and the aerator assembly is vandal-resistant for open restroom use.
6) Is this faucet lead-free for potable water in a school or healthcare facility?
The faucet contains no more than 0.25% total lead content by weighted average, which is the lead-free threshold used for potable water plumbing.
7) What stops the water if something parks in front of the sensor?
A safety timer shuts the water off automatically after 55 seconds, so a bag on the counter or a stuck sensor will not run the sink all night. The faucet also auto-purges periodically to flush stagnant water out of the line, which is worth knowing on low-traffic restrooms where water sits.
8) What finishes does the Paradigm Selectronic base model come in for standardizing across a building?
Two finishes: chrome, ordered as 702B105.002, and brushed nickel, ordered as 702B105.295. Both are the same base-model faucet, so you can mix finishes by building or floor without changing the rough-in or the power kit.
9) How much clearance and counter space does this faucet need?
The Paradigm Selectronic 702B105 is listed at 14.606 x 9.449 x 3.228 inches and weighs 5.049 pounds. Use those numbers to check backsplash and mirror clearance before you set the deck.
How fast can I get the American Standard 702B105.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 702B105.002 come with a warranty?
Absolutely. The American Standard 702B105.002 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 702B105.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the American Standard 702B105.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.