Paradigm Selectronic Touchless Faucet, Battery-Powered With SmarTherm Safety Shut-Off + ADM, 0.35 gpm/1.3 Lpm
- 5-Year CR-P2 lithium battery installed in faucet
- Touchless operation limits the spread of germs
- SmarTherm safety shut-off prevents accidental scalding. ASSE 1070 certified
- Above-deck mixing with removable handle
- Dual inlets for hot and cold water
- Clean, integrated design. No control box below deck
- Easy installation and maintenance: Faucet installs from the top. All serviceable parts are easily accessible
- Auto Purge: Periodically purges stagnant water
- Vandal-resistant 0.35 gpm/1.3 Lpm pressure-compensating multi-laminar spray
- Optional deck plate for 4-inch (102 mm) or 8-inch (203 mm) centers available
Manufacturer Resources
Product Specs
- Product Type:
- Touchless Faucet
- Product Group:
- Kitchen
- Product Subgroup:
- Faucets
- Department:
- Plumbing
American Standard 7025303.002 – Frequently Asked Questions
1) Does the American Standard Paradigm Selectronic touchless faucet need a control box or power under the deck?
No. The Paradigm Selectronic runs on a CR-P2 lithium battery installed in the faucet itself, so there is no below-deck control box and no line voltage or transformer to bring to the sink. It installs from the top of the deck, which is why it suits retrofits where you cannot get at the underside of a counter.
2) Can I mount this touchless faucet on a sink with 4-inch or 8-inch center holes?
Yes, but you need the optional deck plate. The Paradigm Selectronic is a single-hole faucet; American Standard offers an optional deck plate to cover 4-inch (102 mm) or 8-inch (203 mm) centerset holes. Order the plate along with the faucet if you are replacing a two- or three-hole faucet.
3) How does water temperature get set on a touchless faucet with no handle to turn?
Mixing happens above the deck with a removable handle, and the faucet has dual inlets for hot and cold. You set the temperature at the handle, then the sensor controls on/off. Pulling the handle off is a common move in schools and public restrooms where you want the temperature locked where maintenance set it.
4) Is there scald protection on the American Standard Paradigm Selectronic faucet?
SmarTherm safety shut-off stops flow if the cold supply fails, which prevents accidental scalding, and it is ASSE 1070 certified. That matters for healthcare, schools, and any facility where the spec calls for point-of-use temperature-limiting on a lavatory.
5) Will a 0.35 gpm faucet be too slow for a public restroom?
The 0.35 gpm / 1.3 Lpm aerator is a pressure-compensating multi-laminar spray, so flow stays consistent across supply pressure swings instead of dropping off on a long run or a busy building. It is a low-flow spec chosen for water-conservation credits and high-traffic handwashing, not for filling pots or buckets. If you need volume at the sink, specify a higher-flow faucet.
6) What finishes does the Paradigm Selectronic touchless faucet come in, and what are the part numbers?
Two finishes: chrome, model 7025303.002, and brushed nickel, model 7025303.295. If you are standardizing fixtures across a building, those are the two numbers to quote.
7) Does this faucet do anything about stagnant water sitting in the line?
Auto Purge periodically flushes the faucet on its own, so water is not left standing in the body between uses. That is a feature facilities buyers look for in buildings with intermittent occupancy, such as seasonal dorms or vacant suites.
8) How hard is this touchless faucet to service once it is installed?
Serviceable parts are accessible from above the deck, and the battery sits in the faucet rather than in a cabinet below, so a battery change or a cartridge swap does not mean crawling under the counter. The spray outlet is vandal-resistant, which is a point for restrooms that get abused.
9) Is the Paradigm Selectronic a good fit for a kitchen sink?
It is a deck-mount touchless faucet built around handwashing, with a 0.35 gpm multi-laminar spray and above-deck thermal mixing. In a breakroom or food-service handwash station that is exactly the spec. For a production kitchen sink where you fill containers, the 0.35 gpm flow will frustrate staff, so pick a higher-flow kitchen faucet instead.
How fast can I get the American Standard 7025303.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 7025303.002 come with a warranty?
Absolutely. The American Standard 7025303.002 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 7025303.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the American Standard 7025303.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.