Portsmouth 8-Inch Widespread Pedestal Sink Top and Leg Combination
- Vitreous china
- Turn-of-the century detailing on lavatory and pedestal
- Rear overflow
- Faucet holes on 8" (203 mm) centers
- Supplied with mounting kit
- Faucet ledge with large deck area (faucet not included)
- Design-matched to Townsend Champion toilets
- Right Height for greater comfort during use
- Nominal Dimensions:
- 24-3/8 in x 19-1/2 in x 35-7/16 in (619 mm x 495 mm x 900 mm);Bowl Size:;19-1/4 in (wide) 11-3/8 in (front to back) 5-3/4 in (deep)
Manufacturer Resources
Product Specs
- Product Type:
- Pedestal Sink
- Product Group:
- Washroom/Bath
- Product Subgroup:
- Sinks
- Department:
- Plumbing
- Country of Origin:
- Mexico
- Product Color:
- White
American Standard 555801.02 – Frequently Asked Questions
1) What are the dimensions of the Portsmouth pedestal sink, and how much floor space does it need?
Nominal dimensions are 24-3/8 in x 19-1/2 in x 35-7/16 in (619 mm x 495 mm x 900 mm) for the top and pedestal together. The bowl is 19-1/4 in wide, 11-3/8 in front to back, and 5-3/4 in deep. In a small powder room, the 19-1/2 in figure is the one that decides whether the door swing clears the basin.
2) Does the Portsmouth pedestal sink come with the pedestal leg, or do I order that separately?
Both pieces ship together. AMS-555801 is a top and leg combination, so you get the vitreous china lavatory and the matching pedestal in one order, plus the mounting kit. You still need the faucet, the drain, and the supply stops and P-trap to finish the install.
3) Where does the drain and supply rough-in go on a pedestal sink like this?
Behind the leg. The pedestal on the Portsmouth is what hides the trap and the supply risers, so the P-trap and stops have to land inside the column's footprint, not off to the side where an exposed-trap wall-hung lav would put them. Plan the rough-in centered on the basin. The lavatory carries a rear overflow, so the drain you install must be an overflow-type pop-up, not a grid drain.
4) Is the Portsmouth pedestal sink comfort height?
It is. American Standard builds this one to their Right Height standard, and the assembled height works out to 35-7/16 in (900 mm). That is taller than a traditional pedestal lav, which matters if you are specifying for senior housing or a unit where residents have told you the old basin sits too low.
5) Does a pedestal sink still need to be anchored to the wall?
Yes, and the hardware for it is in the box. The Portsmouth ships with a mounting kit; the pedestal carries load but the lavatory is secured back to the wall, so you need solid blocking behind the finish wall at the basin. Frame that in before the drywall goes up, or you are opening the wall again on install day.
6) Will the Portsmouth pedestal sink match my toilet?
American Standard design-matches the Portsmouth lavatory and pedestal to the Townsend Champion toilets, so the styling lines up if you are doing a full room. The detailing is turn-of-the-century, which reads traditional rather than contemporary, worth knowing before you pair it with a modern one-piece bowl.
7) Is a pedestal sink or a vanity the better choice for a small rental bathroom?
Different trade-offs. The Portsmouth pedestal takes up less visual room and costs less to install where storage is not the point, and its faucet ledge gives a large deck area so soap and a cup still have somewhere to sit. What it does not do is store anything or hide the plumbing behind doors. In a unit where tenants need under-sink storage, a vanity is the right call; where the room is tight and the look matters, this is.
8) How durable is a vitreous china pedestal sink for high-traffic use?
Vitreous china is the standard commercial lavatory material: a fired, glazed ceramic that does not stain or scratch from normal cleaning and takes standard bathroom chemicals. It is what you want in multi-family and hospitality washrooms. The one caution is impact, a dropped tool chips china, so it is not a jobsite-abuse material the way stainless is.
How fast can I get the American Standard 555801.02 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 555801.02 come with a warranty?
Absolutely. The American Standard 555801.02 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 555801.02?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the American Standard 555801.02 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.