American Standard Selectronic Hard Wired AC Power Kit - AMS-PK01.HAC

Yes. The PK01.HAC hard wired AC power kit is designed for use with all Selectronic base models, so you don't have to match it to a specific faucet series. It's the AC-powered option, replacing battery operation on the sensor faucet.

Input is 120 to 240 VAC at 50/60 Hz, so the same kit covers standard North American 120V circuits and 240V service. The transformer is Class 2 UL certified, which is what an inspector will look for on a sensor faucet tied into building power.

The kit ships with the transformer, a 10-foot (305 cm) extension cable, and a connector locking device. The faucet itself is not included, and the line-voltage supply to the transformer is your electrician's scope, so plan for a junction box or power source within reach of the cable run.

The included extension cable gives you 10 feet (305 cm) between the transformer and the faucet connection. In a typical restroom that's enough to put the transformer in an adjacent cabinet, a chase, or above a ceiling access panel rather than directly under the lavatory.

Hard wiring with the PK01.HAC makes sense where battery changes are the maintenance headache: high-traffic public restrooms, schools, airports, and any facility standardizing dozens of lavatories. Batteries are simpler in a retrofit with no power at the fixture and no easy path to run a cable. Since this kit suits all Selectronic base models, a facility can convert existing battery units without changing faucets.

It's the power supply only, a transformer kit for Selectronic sensor faucets. Order the faucet separately; this part covers converting or supplying that faucet with AC power.

It secures the plug connection between the transformer cable and the faucet so vibration, cleaning crews, or someone working under the sink can't pull the faucet offline. On public restroom installs that's the part that keeps a sensor faucet from going dead for no obvious reason.