American Standard Spout Seal Kit (Culinaire) - AMS-M962148

It's a seal (O-ring style) repair kit for the spout on American Standard Culinaire faucets. When a faucet leaks from around the base of the spout rather than from the aerator or handles, the spout seals are usually what failed, and this kit is the replacement service part for that repair. Order it by manufacturer part number M962148-0070A.

It's the Culinaire spout seal kit. American Standard sizes spout seals to each faucet family, so this kit is specified for Culinaire and shouldn't be treated as a universal O-ring set. If your faucet is a different American Standard series, match the repair kit to that series instead of substituting this one.

Usually not. A leak at the spout base is typically worn spout seals, and the M962148 kit replaces just those seals so the existing faucet body, spout, and trim stay in place. It's the part plumbers use to service American Standard faucets rather than swapping the fixture, which matters if you're maintaining matched fixtures across a building.

No finish choice applies. The kit contains only the internal spout seals, which sit inside the faucet body where they aren't visible, so it ships as a single part number (M962148-0070A) with no finish option. Chrome, brushed nickel, or bronze Culinaire faucets all use the same seal kit.

If your units are standardized on American Standard Culinaire, this is the seal kit that covers spout base leaks across all of them, so keeping a few on the shelf turns a common complaint into a same-day fix. It's a faucet repair part, not a fixture, so one part number (M962148-0070A) serves every Culinaire spout regardless of the finish on the faucet.

It's a straightforward seal swap: shut off the supplies, pull the spout, replace the seals, reassemble. American Standard lists it as easy to install and it's the standard service part plumbers reach for on these faucets, so an in-house maintenance tech with basic faucet experience can handle it. No special tooling is called out.