American Standard Studio S Pull-Out Dual Spray Kitchen Faucet - AMS-4803100

Height on the Studio S pull-out is 3.346 inches as packaged data states, with a length of 19.449 inches and width of 13.15 inches. Those are the published product dimensions, so measure your sill clearance against them before committing. The spout also swivels 120 degrees, so you want that arc free of a backsplash return or a window crank.

No. The Studio S pull-out is classified as a residential faucet. For a restaurant or institutional kitchen you want a commercial-duty pre-rinse or deck faucet instead. It's a reasonable fit for apartment turns, condo units, and multi-family residential kitchens, which is where most property managers will be putting it.

The Studio S is a single-lever pull-out faucet with a one-piece lever handle, so it's built around a single-hole deck mount. If you are replacing a three-hole faucet, you'll need an escutcheon or deck plate to cover the outer holes, or a separate soap dispenser and air gap in them. That's a common swap on apartment sinks with a 4-inch or 8-inch hole pattern.

Four finishes on the Studio S pull-out dual spray faucet: Chrome (4803100.002), Stainless Steel (4803100.075), Matte Black (4803100.243), and Brushed Cool Sunrise (4803100.GN0). If you're standardizing units across a building, order by the full model number including the suffix, since that's the only thing separating the four.

No, braided nylon supply lines come pre-installed on the faucet. That saves a connection at the faucet body during install. You'll still need your own stops and any adapters between the supply line ends and the shutoffs at the wall.

Body is brass and metal construction rather than plastic, and the valve is a ceramic disc cartridge, which is what keeps it from dripping as the seats wear. The lever handle is one piece with no crevices at the base, so it wipes down instead of collecting grime, which matters on a turn. It is still a residential-class faucet, so match it to residential traffic.

The pull-out wand switches between an aerated stream and a spray pattern. The spray face uses rubber nozzles, so mineral build-up rubs off with a fingertip rather than needing to be soaked off, which is the usual failure point on a hard-water sink.

Published product weight is 5.908 pounds. That's a one-hand carry per unit, so a pallet-free small parcel order is practical if you're buying a handful for unit turns.