You may also like
Bobrick B-3513.MBLK Recessed Sanitary Napkin Disposal, Matte Black
Model: BOB-B-3513.MBLK
Bobrick B-3513.MBLK Recessed Sanitary Napkin Disposal, Matte Black
Recessed mounted unit with matte black powder coated finish stainless steel unit with removable waste bin. Door secures to cabinet...
Bobrick
$427.59
$341.64
Bobrick B-3513 Recessed Sanitary Napkin Disposal
Recessed mounted unit with satin-finish stainless steel* unit with removable waste bin. Door secures to cabinet with a magnet catch and cable door-swing limiter. Waste receptacle has a capacity of 0.6-gal (2.3-L). Rough Wall Opening: 6-3/8? W x 12-3/8? H x 3-3/4? min. depth (162mm x 314mm x 95mm).
Features
- Stainless steel, satin finish
- Recessed
- 8″ W x 14-1/16″ H x 4-7/16″ D
- Capacity of 0.6-gal
Product Specs
- Finish : Satin-Finish Stainless Steel
- Mounting Options : Recessed
- Capacity : 0.6-gal (2.3-L)
- Accessibility : ADA Compliant
Resources
Manufacturer Resources
Product Specs
- Capacity:
- 0.6 Gal
- Product Type:
- Napkin Disposal
- Product Style:
- Recessed
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Waste Receptacle
- Product Material:
- Stainless Steel
- Department:
- Plumbing
- Product Depth:
- 4 7/16"
Bobrick B-3513 – Frequently Asked Questions
1) Will the Bobrick B-3513 fit in a standard 3-5/8 inch metal stud wall?
Not without added depth. The B-3513 needs a minimum 3-3/4 inch wall depth behind the finished surface. A 3-5/8 inch stud with 5/8 inch gypsum on the mounting side gives you enough cavity, but a bare 3-5/8 inch stud cavity alone is short. Check the actual cavity depth on your wall section before committing to a recessed unit; a surface-mounted disposal is the fallback where the wall is too shallow.
2) Is the Bobrick B-3513 sanitary napkin disposal ADA compliant?
Yes, the B-3513 is listed as ADA compliant. As a recessed unit it does not project into the clear floor space of the toilet compartment, which is the usual sticking point with surface-mounted disposals. Mounting height still has to be set so the opening falls within reach range for your compartment layout.
3) How much waste does the B-3513 hold, and how often will housekeeping need to service it?
The removable waste bin holds 0.6 gallons (2.3 liters). That is a single-fixture capacity, sized for one compartment rather than a high-traffic gang restroom, so in a stadium, school, or airport washroom expect a service round each shift. For lower-traffic offices or multi-family common restrooms, daily servicing is typical. The bin lifts out of the cabinet rather than requiring the whole unit to be pulled.
4) Should I specify a recessed or a surface-mounted sanitary napkin disposal?
Go recessed, like the B-3513, when you have at least 3-3/4 inches of usable wall cavity and you want nothing protruding into a tight toilet compartment. It is the cleaner solution for new construction and for accessible stalls where clear floor space is tight. Choose surface mounted instead when you are retrofitting a block, tile, or shallow wall you do not want to cut, or when the compartment is a partition panel rather than a solid wall.
5) What are the overall face dimensions of the Bobrick B-3513?
The unit measures 8 x 14-1/16 x 4-7/16 inches. The face is larger than the 6-3/8 by 12-3/8 inch rough opening, so the flange laps the cut edge and hides a rough tile or drywall cut. Worth checking against your tile coursing if you want the flange to land on a joint.
6) What holds the door shut on the Bobrick B-3513, and is there anything to stop it slamming?
The door is held closed by a magnet catch and controlled by a cable door-swing limiter, so it stops at a set opening instead of swinging free and banging the wall or the flange. There is no lock on the door, which is normal for a napkin disposal since the cabinet itself is what is secured to the wall.
7) What finish and material is the B-3513, and will it match other Bobrick washroom accessories?
Satin-finish stainless steel throughout. That is the same finish Bobrick runs across its standard washroom accessory lines, so it reads consistently alongside satin stainless grab bars, paper dispensers, and mirrors in the same room. Stainless also stands up to the disinfectants used in commercial restroom cleaning.
8) Do I have any finish or configuration options to specify when ordering the B-3513?
No options to sort out. The B-3513 ships one way: satin stainless, recessed. There is no handing, no finish choice, and no left or right version to get wrong on the order, so quantities are the only variable when you are standardizing a facility.
How fast can I get the Bobrick B-3513 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick B-3513 come with a warranty?
Absolutely. The Bobrick B-3513 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick B-3513?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick B-3513 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.