Bobrick B-270 Bobrick Sanitary Napkin Disposal

The B-270 is a surface mounted unit. It hangs on the finished wall face with no wall cavity or in-wall blocking required, which is what you want in a toilet compartment with a block or tile wall you can't cut into. With the cabinet only 3-13/16 inches deep, it projects that far off the partition or wall.

Yes, the B-270 is listed as ADA compliant. Compliance on a surface mounted disposal still depends on where you hang it, so set the mounting height and reach range per the ADA requirements for your facility.

Capacity is 1.0 gallon (3/8 L). That's a single compartment unit sized for one stall, so in a heavily used facility like a school, stadium or airport restroom you're planning on daily or more frequent servicing rather than relying on volume.

Satin-finish stainless steel throughout. Stainless takes routine restroom disinfectants and wipe-downs without the chipping or discoloration you get from painted steel, and the satin finish hides fingerprints and minor scratches better than a bright polish. It matches the satin stainless look of most commercial washroom accessory lines already on the wall.

The cover is a drawn, one-piece stainless part secured to the cabinet with a full-length stainless steel piano hinge. A full-length hinge spreads the load across the whole edge instead of concentrating it on two small pivots, which is why this style is specified for public restrooms where the lid gets worked hundreds of times a week. One-piece drawn construction on the cover means no welded seams on the visible face to crack or corrode.

The B-270 is the stainless cabinet and hinged cover only. Waste liners are a consumable you order separately, sized to the 1 gallon capacity of the cabinet. Budget for them on any multi-stall rollout along with the units themselves.

One finish only: satin stainless steel. There is no powder coat, mirror polish or color option on this model, so every unit you order across a building will match.