Locknetics CS750-32D Electric Strike

No. The CS Series strike is built for cylindrical locksets and select mortise locksets without a deadbolt. A mortise lock with a deadbolt throws a second bolt into the frame that the strike cavity does not release, so the door stays locked no matter what the strike does. For a mortise application, the Securitron MUNL Mortise UnLatch strike or the Von Duprin 6210 for mortise locks are the strikes to look at instead.

Both. The CS750 is set up for metal and wood door frames, and it ships with two face plates plus a trim piece so the opening finishes cleanly in either material. That makes it usable across a mixed building where some jambs are hollow metal and others are wood.

Either one, and you set it on site. Fail-safe/fail-secure is field selectable on the CS750, so the same part number covers an egress door that must unlock on a power drop and a perimeter door that must stay locked when power is lost. Check your local code for the opening before you set it, since fire and egress requirements usually dictate which mode is legal on a given door.

For a labeled fire door, specify a strike that carries the fire rating outright. In that case look at the Von Duprin 6400, rated 3-Hour UL 10C in fail-secure, the Hager 2930 Grade 1 fire rated strike for cylindrical and mortise locks, or the Camden CX-ED1410/CX-ED1420 universal Grade 1 ANSI fire-rated strikes. A fire rated opening also has to run fail-secure, so the latch stays engaged when power drops.

The CS750 is field selectable 12/24 VDC and can be ordered with LBM latch bolt monitoring or without it. The Dortronics 3300 Series is also a 12/24VDC electric strike with a latch bolt sensing switch, supplied with a strike plate for ANSI prep at 4-7/8 inches by 1-1/4 inches. For two monitored points, the Camden CX-ED1799L-8 is a fire rated dual monitor Grade 1 strike supplied with eight faceplates. The Hager 2945 also carries a latchbolt monitor, on a rim exit device application rather than a cylindrical or mortise lock.

The Locknetics CS750 is a medium duty electric strike for cylindrical and mortise locks, field selectable fail-safe/fail-secure and field selectable 12/24 VDC. Where the opening needs a fire-rated, Grade 1 unit for a cylindrical lock, the Von Duprin 4211 32D is the closest equivalent: it is a heavy duty Grade 1 fire-rated strike for cylindrical locks with 12/24 VDC field-selectable voltage, in satin stainless. The Hager 2930 is another fire-rated Grade 1 strike that covers both cylindrical and mortise locks with 12/24 VDC dual voltage and field reversible fail safe/fail secure operation.

The CS750 series accepts a latchbolt up to 3/4 inch. For the same throw from another maker, the HES Folger Adam 310-1(X) strike body is built for 1/2 inch, 5/8 inch or 3/4 inch throw latchbolts, and the SDC 30-4 Series is a rim mount stainless steel strike for a 3/4 inch Pullman latchbolt. On a pair of doors, the Rockwood double door electric strike uses a 3/4 keeper and is Grade 1 fire rated. Strikes such as the SDC 15 Series and the Adams Rite 7240 are built around a 5/8 inch latchbolt projection and will not take the longer throw.

The CS750 works with cylindrical locksets and select mortise locksets without deadbolt in metal and wood frames. For an outdoor gate, the Camden CX-ED1959 Series is an outdoor rated electric gate strike. For a surface vertical rod exit device, the HES Folger Adam 310-4-2 is a complete Grade 1 electric strike pac built for surface vertical rods. For a rim exit device, the SDC 30-4 Series is a 3/4 inch Pullman latchbolt rim mount strike and the Hager 2945 is a fire rated rim exit strike.

Less than most strikes. Two face plates, a trim piece, and a voltage spike suppressor are all in the box, and voltage and fail mode are set in the field rather than ordered. What you supply is the 12 or 24 VDC power source and the access control device that switches it, plus wire to the frame. The only ordering decision on the strike itself is whether you want the LBM latch bolt monitoring version.

The CS750 is a medium duty commercial strike, which suits office suite doors, interior controlled openings, and moderate traffic. For a main entrance or an abused opening, step up to a heavy duty Grade 1 strike such as the Von Duprin 4211 for cylindrical locks or the Alarm Controls AES-100.

Closest matches in the same class are the Dortronics 3300 Series, a 12/24VDC strike with a latch bolt sensing switch and an ANSI prep strike plate at 4-7/8 by 1-1/4 inches, and the Hager 2945 rim exit strike with field selectable fail safe/fail secure and a latchbolt monitor. Both cover the same monitored, dual voltage, field reversible territory. Note the Dortronics is an ANSI prep plate, so confirm your frame cutout matches before swapping.

Yes, the CS750 takes a latchbolt up to 3/4 inch, so it covers 5/8 inch latches as well as longer ones. If you specifically want a 5/8 inch class strike, the SDC 15 Series runs 5/8 inch on 12/24 VDC, the Hager 2925 pairs a 5/8 inch latch with field reversible fail safe/secure, and the SDC 45F is a fire-rated 5/8 inch option with a radius corner faceplate.

It is a reasonable fleet standard for interior and moderate traffic commercial openings: one part number covers metal and wood frames, 12 or 24 VDC, and both fail modes, all set at install. Where it stops working is aluminum storefront and labeled fire doors, which need a different strike, and main entrances, where a heavy duty Grade 1 unit is the better call.

The CS750 is a low profile strike shipped with two face plates and a trim piece. The Camden CX-ED1689L-4 is a fire rated universal low profile strike that comes with four faceplates, and the Camden CX-ED1410 and CX-ED1420 Series are universal Grade 1 ANSI fire-rated strikes. The multiple faceplates on those Camden units let one strike body cover more than one frame prep.

The CS750 is a medium duty commercial strike with field selectable voltage and mode. Where an opening needs less, the Trine 001 Series is a fail-secure light commercial strike with a 5-7/8 inch by 1-1/4 inch faceplate, the SDC 15 Series is a value strike for a 5/8 inch latchbolt with 12/24 VDC operation, and the SDC 25 Series is a value strike for a 1/2 inch latchbolt. The RCI 15BS is an economy fail-secure strike for a special offset latch entry. None of those four is fire rated, so they do not suit a labeled opening.

The CS750 is a 12/24 VDC strike. Where the power supply on hand is AC, the Trine strike rated 8-16VAC is a fail secure unit with a 6-1/4 inch by 1-3/8 inch faceplate and up to 5/8 inch throw, and the Trine 4300CC strike rated 16-24VAC/DC is fail secure with a 5-7/8 inch by 1-1/4 inch faceplate and up to 5/8 inch throw. Both are fire rated.

They are not. The HES 1500 and HES 1600 items are electric strike accessories for those Grade 1 fire rated series, not a complete strike that can stand in for the CS750, which is a full medium duty electric strike for cylindrical and mortise locks with field selectable mode and 12/24 VDC. A complete strike from another maker for the same lock types is the Hager 2930 or the Von Duprin 6400 32D.

The CS750 is finished in 630 satin stainless steel. To keep a building standardized on the same look, the Von Duprin 4211 32D and the Von Duprin 6400 32D are satin stainless Grade 1 strikes, the 4211 for cylindrical locks at 12/24 VDC field-selectable and the 6400 a modular unit for mortise or cylindrical locks in fail-secure. The SDC 30-4 Series is stainless steel construction for a 3/4 inch Pullman latchbolt on a rim mount.

630 satin stainless steel, the 32D finish, which is the standard match for commercial lever and mortise trim on hollow metal openings. US10B faceplates are also offered in the CS line if you are matching dark bronze hardware.

No battery. The CS750 is a wired electronic strike running on 12 or 24 VDC from an access control power supply, so it is dead until it is wired to a source and a release device. Budget for a power supply and the wiring run to the frame if the opening does not already have one.

The SDC 45F Series is a fire-rated electric strike with a radius corner faceplate, built for a 5/8 inch latchbolt. That matters when the frame prep has rounded corners. The CS750 ships with two face plates and a trim piece and accepts a latchbolt up to 3/4 inch.