You may also like
SATCO Lighting S11256 9.5W, BR30 LED, RGB & Tunable White, Starfish IOT, 120V, 800 Lumens, 2-Pack
9.5 Watt - BR30 LED - RGB & Tunable White - Starfish IOT - 120 Volt - 800 Lumens - 2-pack
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.079A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA T20 Alt Sub:
- S11276
- CA Web Text:
- Non-Compliant
- CCT Selectable:
- Yes
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- BR30
- Lens Finish:
- White
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- Reflector
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 65W
- Location Rating:
- Damp
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 100
- Light Temperature:
- 2700K-5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 9.5W
- Product Material:
- Plastic
- Country of Origin:
- China
- Product Weight:
- 0.21 lb
Satco Lighting S11256 – Frequently Asked Questions
1) What incandescent flood lamp does a 9.5W BR30 LED replace?
The S11256 is rated as a 65W incandescent equivalent, putting out 800 lumens on 9.5 watts. For a property manager relamping older 65W BR30 floods in recessed cans, it is a straight swap on light output.
2) Can I use this Satco Starfish BR30 bulb in a California project?
No. The S11256 is flagged Non-Compliant for California Title 20. Satco lists S11276 as the California-compliant alternate substitute, so order that one for jobs in California.
3) Can this BR30 LED go in a covered outdoor soffit or a bathroom shower can?
It is an indoor-rated lamp with a damp location rating. That covers a bathroom or an enclosed porch ceiling where it will not see direct water, but it is not a wet location lamp, so skip open eaves and anywhere exposed to rain or spray.
4) Does the Satco S11256 need a hub or bridge to work?
It runs on Satco's Starfish IOT platform, which is Wi-Fi based, so no separate hub or gateway is part of the bulb's requirement. Color and white tuning are handled through the Starfish control rather than a wall dimmer. The bulb itself is dimmable and the white range is selectable from 2700K to 5000K with full RGB color.
5) How wide is the beam on the Satco S11256 BR30, and how far apart should the cans be?
Beam spread is 100 degrees, a wide flood. That suits general ceiling washing in a lobby, corridor, or living space rather than accenting artwork. For tight spot accenting on a narrow target you want a PAR lamp with a narrow beam instead.
6) Can I install the S11256 base-up in a recessed can or base-down in a pendant?
Burning position is universal, so base-up in a recessed housing, base-down in a pendant, or horizontal in a wall sconce all work without affecting the rating.
7) Will this color-changing bulb work on a three-way socket?
No. The S11256 is not a three-way lamp, so in a three-way socket it will run at a single output regardless of switch position. Dimming and color are controlled through Starfish, not the socket.
8) Is the Satco Starfish BR30 eligible for a utility rebate on a commercial retrofit?
It is not DLC approved, so it will not qualify under rebate programs that require a DesignLights Consortium listing. For a rebated commercial relamp you need a DLC-listed lamp. The S11256 does carry FCC compliance for its wireless radio.
9) How much color quality and life should I expect from this smart BR30?
CRI is 80 and average rated life is 25,000 hours. An 80 CRI lamp is fine for corridors, offices, and multi-family common areas; for retail merchandising or anywhere color rendering is on the spec, look for 90 CRI.
10) How many bulbs come with Satco S11256?
S11256 ships as a 2-pack of white-lens BR30 lamps. Each lamp weighs 0.21 lb, and the housing and base are plastic.
How fast can I get the Satco Lighting S11256 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11256 come with a warranty?
Absolutely. The Satco Lighting S11256 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11256?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11256 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.