You may also like
SATCO Lighting S11276 9.5W, BR30 LED, RGB & Tunable White, Starfish IOT, 120V, 760 Lumens, 2-Pack
9.5 Watt - BR30 LED - RGB & Tunable White - Starfish IOT - 120 Volt - 760 Lumens - 2-Pack
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.079A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- Yes
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- BR30
- Lens Finish:
- White
- Lens Material:
- Plastic (PS)
- Lumens:
- 760L
- Operating Frequency:
- 60Hz
- Product Type:
- Reflector
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 65W
- Location Rating:
- Damp
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 100
- Light Temperature:
- 2700K-5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 9.5W
- Product Material:
- Plastic
- Product Weight:
- 0.34 lb
- Department:
- Electrical
Satco Lighting S11276 – Frequently Asked Questions
1) How bright is the 9.5W Satco Starfish BR30 compared to the 65W flood it replaces?
It puts out 760 lumens and is rated as a 65W incandescent equivalent, pulling 9.5 watts to do it. Beam spread is 100 degrees, so it is a wide flood rather than a tight spot, and the CRI is 90 for accurate color rendering on finishes, paint, and merchandise.
2) Can I change the color temperature on the Satco S11276, or is it fixed at one Kelvin?
It is CCT selectable across 2700K to 5000K, plus full RGB color. One lamp covers warm white for lobbies and residential units, neutral for corridors, and 5000K for utility or work areas, so a property can standardize on a single stocked bulb instead of three.
3) Should I leave the existing wall dimmer in the circuit with these smart BR30 bulbs?
The lamp is dimmable, but dimming is handled in the app with a Starfish bulb, so the usual practice is to feed it full line voltage and leave an existing wall dimmer wide open or swap it for a standard switch. Running it down on a legacy phase-cut dimmer is what causes dropouts in app control. It is not a three-way lamp, so do not put it in a socket expecting 3-way stepping.
4) Can I use the Satco S11276 BR30 in a bathroom, covered porch, or shower can?
It is rated for damp locations and listed for indoor use, so an enclosed bathroom can, a kitchen soffit, or a covered and sheltered porch ceiling is within rating. Do not use it in a wet location such as an open eave, a shower head directly exposed to spray, or anywhere it takes direct rain.
5) Does the Starfish BR30 need a hub or bridge to control it?
No separate hub is needed. The S11276 is a Starfish IOT lamp with the radio built into the bulb, and it is FCC compliant. Install it in a standard 120V medium-base socket and control is handled through the Starfish app over your own Wi-Fi.
6) How many bulbs come in the Satco S11276 and how long do they last?
S11276 ships as a 2-pack, and each lamp is rated 25,000 average hours. For a common-area fixture burning roughly 12 hours a day, that is on the order of five years before a relamp trip, which is the number that matters when you are costing out maintenance labor on a multi-family or hospitality property.
7) Will these BR30 smart bulbs qualify for a utility rebate through DLC?
No. The S11276 is not DLC approved, so it will not qualify under programs that require a DesignLights Consortium listing. It is noted as lawful for sale in California.
8) What is the Satco S11276 BR30 made of, and is the lens clear or diffused?
Housing and base are plastic, and the lens is white polystyrene, so the flood output is diffused rather than a clear lamp with a visible LED array. Each lamp weighs 0.34 lb, light enough for clip-type track heads and older can sockets.
How fast can I get the Satco Lighting S11276 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11276 come with a warranty?
Absolutely. The Satco Lighting S11276 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11276?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11276 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.