ABH EL019 Electrified Intermed...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,039.00
$1,021.00
ABH ABH EL019 Intermediate Pivot Lead-Lined - Electrified - 3/4" Offset ABH-EL019

ABH EL019 Electrified Intermediate Pivot with 3/4" Offset for Lead-Lined Fire-Rated Doors

(No reviews yet) Write a Review

Model: EL019-RH-US26
$1,039.00
$1,021.00
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,039.00
$1,021.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

ABH Electrified Intermediate Pivot with 3/4" Offset for Lead-Lined Fire-Rated Doors

Professional Electrified Pivot Solution for Lead-Lined Applications

The ABH Electrified Intermediate Pivot delivers reliable electrical power transfer from frame to door while maintaining proper alignment for 1-3/4" lead-lined doors. This heavy-duty pivot features 3/4" offset configuration with (8) 30 AWG wires for electrical connectivity and UL listing for 3-hour fire rated door applications. Constructed with stainless steel needle bearings and stainless steel base material for commercial-grade durability.

Professional Features & Benefits

  • Lead-Lined Door Compatibility: Specifically designed for 1-3/4" lead-lined doors with 3/4" offset configuration for proper clearance and operation.
  • Electrical Power Transfer: Integrated (8) 30 AWG wires provide reliable electrical connectivity from frame to door for electrified hardware applications.
  • Fire Rating Compliance: UL Listed for use on 3-hour fire rated doors ensuring code compliance for critical fire safety applications.
  • Heavy-Duty Construction: Stainless steel needle bearings and stainless steel base material provide exceptional durability for commercial applications.
  • Door Alignment Support: Intermediate pivot design helps maintain proper door alignment throughout operation cycles.
  • Mortise Installation: Mortises into side jamb and hinge edge of door for secure, professional installation.
  • Handed Configuration: Available in left-hand or right-hand configurations to match door swing requirements.

Technical Specifications

  • Application: Electrified, Lead-Lined, Fire-Rated
  • BAA Qualified: Yes
  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Duty Level: Heavy Duty
  • Electronic: Yes
  • Fire Rated Time: 3 hours
  • Fire Rating: Yes
  • Hang Type: Offset Hung
  • Keyed: N/A
  • Keyed Function: N/A
  • Mounting Method: Offset
  • PDF: EL019 Cut Sheet - Electrified 3/4" Offset lead-Lined Intermediate Pivot: https://zensupply.com/content/pdf/abh/0000028_e019_15_el019_cutsheet.pdf
  • PDF: EL019 Template - Electrified 3/4" Offset Pivot for Lead-Lined Doors: https://zensupply.com/content/pdf/abh/0000060_el019_07.pdf
  • PDF: EZ Connect Wire Color & Position Diagram Micro-Fit 3.0: https://zensupply.com/content/pdf/abh/0000157_ez_connect_wire_color_and_position_diagram_micro_fit_30.pdf
  • PDF: Pivot Set Configurations: https://zensupply.com/content/pdf/abh/0002621_pivot_set_configurations.pdf
  • PDF: Pivot Type 3/4" & 1-1/2" Offset: https://zensupply.com/content/pdf/abh/0000163_tm_pivot_type_offset.pdf
  • PDF: Pivot and Pivot Sets Special Layout Order Form - Must Download: https://zensupply.com/content/pdf/abh/0002519_pivot_and_pivot_sets_special_layout_form_1.pdf
  • PDF: Pivots Cross Reference Chart: https://zensupply.com/content/pdf/abh/0000411_cross_reference_chart.pdf
  • PDF: Substitution Request Pivots: https://zensupply.com/content/pdf/abh/0000116_substitution_request_form_compressed.pdf
  • Pivot Type: Intermediate
  • Product Attribute: Pivots
  • Product Category: Door Hinges and Pivots
  • Product Group: Door Hinges and Pivots
  • Product Model: EX0180
  • Product Subgroup: Pivots and Pivot Sets
  • Product Substrate: Stainless Steel
  • Product Type: Pivot Sets - Offset
  • Subcategory: Pivot Sets

Professional Applications

  • Healthcare Facilities with Lead-Lined Radiation Protection
  • Medical Imaging Centers and X-Ray Rooms
  • Laboratory and Research Facilities
  • Nuclear Medicine Departments
  • Veterinary Clinics with Imaging Equipment
  • Industrial Facilities with Radiation Sources
  • Government and Defense Applications

Why Choose ABH Quality?

ABH electrified pivot products deliver professional-grade reliability with stainless steel construction and heavy-duty needle bearings engineered for demanding commercial applications. UL Listed for 3-hour fire rated doors with specialized lead-lined door compatibility ensures code compliance and long-term performance. Designed for critical applications where dependable electrical connectivity and door alignment are essential.

Product Specs

Product Group:
Door Hinges and Pivots
Product Subgroup:
Pivots and Pivot Sets
Product Type:
Pivot Sets - Offset
Subcategory:
Pivot Sets
Commercial/Residential:
Commercial
Hang Type:
Offset Hung
Keyed:
N/A
Keyed Function:
N/A
BAA Qualified:
Yes
Duty Level:
Heavy Duty
Fire Rated Time:
3 hours
Electronic:
Yes
Pivot Type:
Intermediate
Mounting Method:
Offset
Application:
Electrified, Lead-Lined, Fire-Rated
Product Attribute:
Pivots
Product Model:
EX0180
Fire Rating:
Yes
Product Category:
Door Hinges and Pivots
Product Substrate:
Stainless Steel
Department:
Door Hardware

ABH EL019-RH-US26 – Frequently Asked Questions

1) Will the ABH EL019 electrified pivot work on a 1-3/4 inch lead-lined door?
That is exactly the opening the EL019 is built for. It's an intermediate pivot for 1-3/4 inch lead-lined doors, with a 3/4 inch offset that gives the leaf clearance around the lead core. It mortises into the side jamb and into the hinge edge of the door. If your door is a standard 1-3/4 inch commercial leaf with no lead lining, this is more pivot than the opening needs, and a plain 3/4 inch offset intermediate pivot is the simpler order.
2) Can I use an electrified pivot on a 3-hour fire rated door?
Yes, and that's the reason to specify the EL019 over a generic power transfer. It is UL Listed for use on doors with a 3 hour fire rating, so it holds up on the stair, shaft, and imaging-suite openings where an inspector will ask. Fire rated openings are where a lot of electrified transfer hardware gets rejected, so this is the piece that keeps an electrified lock or exit device legal on a rated lead-lined door.
3) How many wires does the ABH EL019 pivot carry, and what can it power?
Eight 30 AWG conductors run through the EL019 from frame to door. Eight gives you room to run an electrified lock or exit device plus a request-to-exit or latch monitor signal on the same transfer, rather than needing a second path. Wire colors and pin positions follow ABH's EZ Connect Micro-Fit 3.0 diagram, so the electrician should have that sheet at the opening before terminating.
4) Do I need to order the ABH EL019 pivot left hand or right hand?
Handing is a required choice, not an option. The EL019 comes left hand or right hand, and the offset pivot is cut for one swing only, so a left hand unit will not serve a right hand opening. Determine the hand at the door before ordering. Both hands are offered across all fourteen finishes.
5) Is an intermediate pivot enough on its own, or do I need a top and bottom pivot too?
An intermediate pivot never hangs a door by itself. It sits between the top and bottom pivots and carries alignment and, here, the electrical run. You still need a full offset hung pivot set at head and floor. On tall or heavy lead-lined leaves it's common to run more than one intermediate. ABH publishes a Pivot Set Configurations sheet showing how the pieces stack up on a given opening.
6) I have a 3/4 inch offset opening already hung on Calibre PV1000 pivots and now need to add an electric strike loop through the door. What changes?
The offset dimension does not change. The Calibre PV1000 is a 3/4 inch offset flush pivot set, and the ABH EL019 is a 3/4 inch offset intermediate pivot, so both work to the same 3/4 inch offset geometry and offset hung method. What changes is that the EL019 is electronic and mortises into the side jamb and hinge edge of the door to carry wiring across the gap, and it is handed left or right to match the swing. Adding power to the leaf means adding the mortise prep and picking the correct hand, not re-hanging the door to a different offset.
7) Is the ABH EL019 pivot Buy American compliant for a federal or VA hospital job?
Yes. The EL019 is BAA qualified, which is what a government or VA procurement officer needs on the submittal for a lead-lined imaging room door. It's a commercial, heavy duty product, built with a stainless steel base and stainless steel needle bearings.
8) What else does ZenSupply carry in a 3/4 inch offset pivot if I don't need the electrified version?
The Calibre Door Closers PV1000 is a 3/4 inch offset flush pivot set, same offset geometry, no wire run through it. That's the choice when the door is lead-lined or offset hung but nothing on the leaf needs power. BEST also offers the A3 System offset hung pivot set, which is fire rated. Neither carries conductors, so if you're feeding an electrified lock or exit device on the door, the EL019 is the one that does both jobs at once.
9) Why use a pivot for power transfer instead of an electric hinge or a door loop on a lead-lined door?
Lead-lined imaging doors are heavy and usually offset hung on pivots rather than butt hinges, so an electric hinge often isn't an option to begin with. A surface door loop works electrically but sits exposed on the opening and is a poor match for a rated door in a clinical corridor. The EL019 runs the eight conductors concealed inside the pivot itself, mortised into the jamb and door edge, while doing the alignment work the intermediate pivot was already there to do. And it's UL Listed on 3 hour rated doors, which is where a lot of surface transfer devices get ruled out.
10) For a healthcare facility standardizing pivot hardware, how do the ABH EL019 and BEST A3 differ on scope?
The BEST A3 System is an offset hung pivot set with premium core technology and carries a fire rating, which suits it to standard fire rated openings across a facility. The ABH EL019 is a narrower specialty part: heavy duty, commercial, stainless steel, UL Listed for 3 hour fire rated doors, and built specifically for lead-lined door construction with power transfer through the pivot. In practice a facility often runs the broader offset hung set on general openings and reserves the EL019 for imaging and radiation-shielded rooms where the leaf is lead-lined and the hardware in it is electrified. Both are offset hung, so the hanging method stays consistent either way.
11) What finishes does the ABH EL019 electrified pivot come in?
Fourteen, and they split into painted and plated. Painted: aluminum, brass, bronze, black, dark bronze, and white. Plated or metal: satin bronze, oil rubbed bronze, bright chrome, bright brass, bright stainless steel, satin stainless steel, satin brass, and bright bronze. On lead-lined imaging room doors the painted finishes usually win because the pivot is meant to disappear into the jamb paint; on a finished bronze or stainless opening, match the plated finish to the balance of the trim.
12) Do I need to submit anything special to order ABH pivots for a non-standard opening?
For anything off the standard layout, ABH requires their Pivot and Pivot Sets Special Layout Order Form, and it has to be filled in and submitted with the order. If you're substituting the EL019 in for a pivot named in a spec, there's a separate substitution request form for pivots that the architect or GC will typically want on file. Standard 1-3/4 inch lead-lined openings with a normal pivot layout don't need either one.
How fast can I get the ABH EL019-RH-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ABH EL019-RH-US26 come with a warranty?
Absolutely. The ABH EL019-RH-US26 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ABH EL019-RH-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the ABH EL019-RH-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!