ABUS 26/90 Diskus Stainless St...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$99.05
ABUS ABUS 26/90 Diskus Stainless Steel Padlock with Key, 15/32" Shackle diam., 3 35/64" Width ABUS-26/90

ABUS 26/90 Diskus Stainless Steel Padlock with Key, 15/32" Shackle diam., 3 35/64" Width

(No reviews yet) Write a Review

Model: 26/90-KA
Selected Keying is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$99.05
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Padlock 26 Diskus®

Trust the original: Our Diskus® 26 is an extremely robust padlock for securing trucks, vans, cellar doors, and factory gates.

  • The original ABUS Diskus® – heavy stainless steel lock body
  • 360-degree all-round protection
  • Cylinder protected against drilling or pulling open

TRUST THE ORIGINAL

Our Diskus® 26 is an extremely robust padlock for securing trucks, vans, cellar doors, and factory gates.

Our Diskus® 26 padlock consists of a solid steel body. The solid interior provides even more security. The cylinder is protected against attempts to drill it or pull it out. The seam that holds the two stainless steel housing pieces together on the Diskus® 26 is also hand-welded. This means that the two halves cannot be easily broken apart and the Diskus® 26 secures your valuables and items very well. Even more break-in protection = even more security!

Technology:

  • Heavy-duty stainless steel body
  • Massive inner base for enhanced security
  • Additional protection against sawing
  • Shackle made from special alloy hardened steel
  • Drill and pull resistant cylinder
  • Diskus® Deep-Welding Technology - maximum strength
  • Original Diskus® design: 360° protection
  • Key retaining: key is needed for locking (lock retains key until locked)
  • Made in Germany

Operation and use:

  • To secure valuables/goods of greater value or at a high risk of theft
  • To secure lorries, transporters, cellar doors, factory gates, etc.
  • Ideally used with ABUS Diskus® Hasp 140: virtually impossible to attack shackle

Manufacturer Resources

Product Specs

Product Group:
Other / Miscellaneous Hardware
Horizontal Shackle Clearance:
63/64"
Shackle Diameter:
15/32"
Vertical Shackle Clearance:
5/8"
Product Subgroup:
Padlocks
Product Type:
Padlocks
Subcategory:
Padlocks
Commercial/Residential:
Commercial
Product Model:
26/90
Product Category:
Other / Miscellaneous Hardware
Product Width:
3-35/64"
Department:
Door Hardware

ABUS 26/90-KA – Frequently Asked Questions

1) Will the ABUS 26/90 Diskus padlock fit my hasp? What is the shackle opening?
The 26/90 Diskus gives you 63/64 inch of horizontal shackle clearance and 5/8 inch vertical clearance, with a 15/32 inch diameter shackle. That is a deliberately tight opening, which is what makes the round Diskus body hard to attack, but it also means the staple or link you are locking through has to pass through a 15/32 inch hole and sit inside that 63/64 by 5/8 inch window. Measure the eye on your hasp or the chain link before you order. The body itself is 3-35/64 inches wide, so allow room for the disc to sit flat against the door or gate.
2) Can I get ABUS 26/90 Diskus padlocks all on one key for a building or a truck fleet?
Three keying options are offered on the 26/90: keyed alike, so every padlock in the group opens with the same key, keyed different, so each lock has its own key, and master keyed, where each lock keeps its own change key while one master opens the whole set. Property managers securing a run of storage rooms or cellar doors usually want keyed alike; a facility with separate tenants or crews normally wants master keyed so a supervisor carries one key and each user only opens their own.
3) Can the ABUS Diskus 26/90 take an interchangeable core to match my existing key system?
No. The 26/90 is a fixed ABUS cylinder padlock keyed within the ABUS system, ordered keyed alike, keyed different or master keyed at purchase. If your facility standardizes on a small format or large format removable core, you want a padlock built for it, such as the Sargent 60-858-2 removable core padlock, so the lock takes the same core as the rest of your openings.
4) What is a stainless steel bodied padlock alternative to the ABUS 26/90 Diskus for outdoor use?
The Medeco 521 G8R Weather-Tight padlock uses a solid stainless steel body and ships less pop-out cylinder, so the cylinder is supplied separately to match an existing Medeco keying system. The ABUS 26/90 Diskus is also a stainless steel body lock, hand-welded from two housing halves, and comes with the key. The choice comes down to whether the site is standardizing on a Medeco cylinder platform or wants a complete lock out of the box.
5) What padlock should be used instead of the ABUS 26/90 Diskus when access needs to be audited electronically?
The Medeco 54515G XT is an electronic indoor/outdoor padlock, non-key retaining, with a 5/16 inch shackle diameter and cylinder included, and it runs on an electronic credential platform rather than a mechanical key. The ABUS 26/90 Diskus is a mechanical key retaining lock. For gates and cellar doors where the only requirement is a rugged mechanical lock, the Diskus covers it; where the requirement is knowing who opened it and when, the electronic unit is the one that answers that.
6) What is the difference between a key retaining padlock like the ABUS 26/90 and the Sargent 858?
The ABUS 26/90 Diskus is key retaining - the key stays captive in the cylinder until the lock is closed, so a padlock cannot be left hanging open with the key walked away. The Sargent 858 is a non-key retaining padlock with a stainless steel shackle in a US4 satin brass finish, so the key comes out with the lock open. Sargent also offers the 758, which is key retaining in the same US4 satin brass finish, if that behavior is the requirement.
7) Is a brass body padlock a substitute for the ABUS 26/90 Diskus?
It is a different construction. The Medeco 5260 uses a brass body with a 7/16 inch shackle diameter and M3 key technology in satin chrome, and the Schlage KS23D/KS23F is a brass padlock with a 5/16 inch diameter shackle. The ABUS 26/90 Diskus has a stainless steel body with a 15/32 inch shackle diameter and the round Diskus profile that shields the shackle on all sides. Where a hasp is cut for a conventional rectangular padlock body, the brass units drop in; the Diskus body pairs with a hasp made for its round shape.
8) Why does the Diskus padlock keep my key until I lock it?
The 26 Diskus is key retaining. The key will not come out of the cylinder while the lock is open, so you cannot walk away and leave a padlock hanging unlocked with the key in your pocket. For fleets and gates that is the point: the driver or crew has to physically re-lock the hasp to get the key back. If you want a padlock you can pull the key from while it hangs open, look at a non-key-retaining model instead, such as the Sargent 858 or the Sargent 82-856.
9) Is a Diskus padlock better than a standard shackle padlock for an outdoor gate or a truck?
The difference is exposed shackle. A conventional padlock leaves a tall square shackle sticking up where bolt cutters and a pry bar can get a bite. The Diskus 26 is a round stainless steel body that wraps the shackle for 360 degree coverage, with only 5/8 inch of vertical clearance showing, and the two housing halves are hand welded so they cannot be split apart. That is why it gets specified on trucks, vans, cellar doors and factory gates. Where you need a padlock that takes your facility's existing key system instead, a conventional body like the Sargent 60-858-2 removable core padlock is the direction to go.
10) Is the ABUS 26/90 rated for commercial use, and will it hold up outdoors?
The 26/90 is a commercial grade padlock. Body and housing are stainless steel, the shackle is a hardened special alloy steel, and the cylinder is built to resist drilling and pulling. It is made in Germany. Those are the materials that matter on an unheated gate or an exposed truck door where a plated steel padlock rusts solid in a season.
11) Which padlock has a larger shackle diameter, the ABUS 26/90 Diskus or the Medeco 5260?
The ABUS 26/90 Diskus has a 15/32 inch shackle diameter, with 63/64 inch horizontal clearance and 5/8 inch vertical clearance under the shackle. The Medeco 5260 lists a 7/16 inch shackle diameter, and the Schlage KS23D/KS23F and the Medeco 54515G both list 5/16 inch. Confirm the hasp eye or chain link accepts 15/32 inch before ordering the Diskus in place of one of the smaller shackles.
12) Can the ABUS 26/90 Diskus be master keyed across a property like a Sargent or Medeco system padlock?
The ABUS 26/90 Diskus is offered master keyed, as well as keyed alike and keyed different, so a set can run under one master for a maintenance crew. Sargent covers the same need through its 758/858 series, including the 60-858-2 removable core version, and the 82-856 runs on the KESO platform with a 2 inch by 2 inch brass case and stainless steel shackle. A property already carrying Sargent or Medeco cylinders will usually keep padlocks on that platform; a standalone yard or gate set is where the Diskus master keyed option stands on its own.
13) Is the ABUS 26/90 Diskus a commercial grade padlock compared to the Sargent and Medeco padlocks?
The ABUS 26/90 Diskus is a commercial door hardware item, 3-35/64 inches wide, with a hardened alloy steel shackle, a drill and pull resistant cylinder, and added saw protection, made in Germany. The comparable commercial units include the Sargent 758 and 858 series, the Sargent 82-856 on the KESO platform, and the Medeco 52 Series and G8R series. All are specified for commercial openings; the Diskus differs in body shape, shielding the shackle within the round housing rather than exposing it above a rectangular case.
14) How big is the ABUS 26/90 padlock body, and will it clear a recessed hasp?
The disc body measures 3-35/64 inches wide. It is a large flat lock, so check the pocket if you are mounting into a recessed hasp or a door with limited face clearance. If the mounting point is tight, a compact conventional padlock body like the Schlage KS23D/KS23F brass padlock or the Medeco 5260 brass body padlock takes less face room, though both use a smaller shackle at 5/16 inch and 7/16 inch respectively.
15) I need an electronic or audit trail padlock instead of a keyed one. What are my options?
The 26/90 Diskus is purely mechanical, keyed by cylinder, with no access log. If you need credential based access and an audit record on an exterior padlock, the Medeco 54515G XT electronic indoor/outdoor padlock is the electronic option, with a 5/16 inch shackle. For a weather exposed mechanical alternative with a solid stainless body, the Medeco 521 G8R weather-tight padlock is the closer match to what the Diskus does.
How fast can I get the ABUS 26/90-KA delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ABUS 26/90-KA come with a warranty?
Absolutely. The ABUS 26/90-KA is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ABUS 26/90-KA?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the ABUS 26/90-KA from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!