ABUS 80TI/50 Titalium Aluminum...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$24.44
ABUS ABUS 80TI/50 Titalium Aluminum Alloy Padlock with Key, 25/64" Shackle diameter ABUS-80TI/50 C

ABUS 80TI/50 Titalium Aluminum Alloy Padlock with Key, 25/64" Shackle diameter

(No reviews yet) Write a Review

Model: 80TI/50 C-KA
Selected Keying is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$24.44
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Padlock 80 TITALIUM™

Not only secure, but lightweight, too: Our 80TI secures larger valuables or items at high risk of theft.

  • Solid lock body made from TITALIUM™ aluminum alloy - higher security, less weight
  • Light and yet robust
  • Hardened steel shackle with NANO PROTECT™ coating

LIGHTWEIGHT, ROBUST, AND SECURE

Our 80 TITALIUM™ padlock is made of special aluminum with a solid lock body and a precision cylinder.

Not only secure, but lightweight, too: Our 80TI secures larger valuables or items at high risk of theft. We recommend the lock for cellar doors, gates, cabinets, lockers, or tool boxes. The hardened steel shackle has a Nano Protect™ coating. This makes the 80 TITALIUM™ padlock particularly robust and secure.

Technology:

  • Solid lock body made from TITALIUM™ aluminum alloy - higher security, less weight
  • Hardened steel shackle with NANO PROTECT™ plating for extreme corrosion resistance
  • 6-pin precision cylinder with paracentric keyway
  • Double bolted shackle
  • Chrome-plated cylinder plugs with additional corrosion resistance
  • Large tulip-shaped key head

Operation and use:

  • To secure valuables/ goods of greater value or at a high risk of theft
  • To secure doors, gates, cupboards, tool boxes, cellar windows, sheds, switchboards, etc.

Manufacturer Resources

Product Specs

Product Group:
Other / Miscellaneous Hardware
Horizontal Shackle Clearance:
63/64"
Shackle Diameter:
25/64"
Vertical Shackle Clearance:
1-3/8"
Product Subgroup:
Padlocks
Product Type:
Padlocks
Subcategory:
Padlocks
Commercial/Residential:
Commercial
Product Model:
80TI/50
Product Category:
Other / Miscellaneous Hardware
Product Width:
1-31/32"
Department:
Door Hardware

ABUS 80TI/50 C-KA – Frequently Asked Questions

1) Do I order the ABUS 80TI/50 keyed alike or keyed different?
Both are offered, and it is the only choice you make on this padlock. Keyed alike means every lock in the group opens with the same key, which is what a property manager wants when one maintenance tech has to reach twenty gates or storage cages on one key. Keyed different gives each lock its own key, for tenant storage, individual lockers, or anywhere separate people need separate access. Order the whole set at once if you go keyed alike, so they land on one key group.
2) Can the ABUS 80TI/50 take an interchangeable core so it runs on our building master key system?
No. The 80TI/50 uses a fixed 6-pin precision cylinder with a paracentric keyway on its own ABUS key, so it will not accept a small format or large format interchangeable core. If the padlocks have to sit on the same master key system as the rest of your doors, look at a removable core padlock instead, such as the Sargent 60-858-2 in the 758/858 Series. The 80TI is the right choice when you want a self-contained lock on its own key group rather than one tied to a facility system.
3) For an outdoor gate padlock, what are the alternatives to the ABUS 80TI/50?
The Medeco 521 G8R is a weather-tight padlock with a solid stainless steel body, supplied less the pop-out cylinder, in Medeco's G8R line. The Sargent 858 is a non-key-retaining padlock with a stainless steel shackle in a US4 satin brass finish. The ABUS 80TI/50 approaches the same exposure with a Titalium aluminum alloy body, a hardened steel shackle carrying a Nano Protect coating for corrosion resistance, and chrome-plated cylinder plugs; ABUS recommends it for cellar doors, gates, cabinets, lockers, and tool boxes.
4) What is the closest alternative to the ABUS 80TI/50 padlock for a facility already keyed on a Schlage system?
The Schlage KS23D/KS23F is a brass-body padlock in Schlage's 20 Series with a 5/16 inch shackle diameter. The ABUS 80TI/50 uses a Titalium aluminum alloy body with a hardened steel shackle at 25/64 inch diameter and a 6-pin precision cylinder with a paracentric keyway on its own ABUS key system. If the goal is one key across the building's Schlage openings, the KS23 is the padlock that ties into that; if the goal is the heavier shackle and the lighter alloy body, the 80TI/50 is the one, and it comes keyed alike or keyed different.
5) Which padlock should be used instead of the ABUS 80TI/50 when the site is standardized on interchangeable cores?
The Sargent 60-858-2 is a removable core padlock with a 2 inch stainless steel shackle in the 758/858 Series, so the core can be pulled and rekeyed with the rest of the facility's cores. The ABUS 80TI/50 has a fixed 6-pin precision cylinder in a Titalium aluminum alloy body and is ordered keyed alike or keyed different at time of purchase, which suits a padlock set that is managed on its own keys rather than through a core program.
6) Is the Medeco 54515G XT padlock a substitute for the ABUS 80TI/50?
No. The Medeco 54515G XT is an electronic indoor/outdoor padlock in the System Series, non-key retaining, with a 5/16 inch shackle diameter and cylinder, so it belongs to an audited electronic credential program with its own software and programming. The ABUS 80TI/50 is a purely mechanical padlock: a 6-pin cylinder with a paracentric keyway, a double bolted hardened steel shackle at 25/64 inch diameter, and no electronics to enroll or charge. A crew that just needs a key in a hand should not be pointed at the XT.
7) How wide is the ABUS 80TI/50 lock body, and will it sit flat on a narrow hasp plate?
Body width on the 80TI/50 is 1-31/32 inches, just under two inches. On a hasp plate narrower than that the body will overhang the edge, which is usually fine on a gate or a locker but matters on a recessed cabinet or a switchboard door where the lock has to clear the frame when it swings.
8) Does the key come out of the ABUS 80TI/50 while the padlock is open?
The 80TI is a non-key-retaining padlock, so the key pulls free with the shackle open. That is what you want on a jobsite gate or a truck box where one person carries the key and the lock hangs open on the hasp during the day. If your procedure requires the key be trapped in the lock until it is relocked, so a key cannot walk off with a lock left unsecured, the Sargent 758 is the key retaining version to specify.
9) Why is the ABUS 80TI/50 shackle harder to cut or pry than a hardware store padlock?
Two things carry the load. The shackle is double bolted, meaning it locks on both the heel and the toe, so cutting one side will not swing the shackle open, and the 25/64 inch hardened steel section is what a bolt cutter has to get through. The cylinder plugs are chrome plated for extra corrosion resistance, which matters more than it sounds on an exterior gate where a seized cylinder is the actual failure mode.
10) What is the difference between the ABUS 80TI/50 and a heavier brass or stainless padlock of the same size?
Weight, mostly, and what the body is made of. The 80TI/50 gets its body from TITALIUM aluminum alloy so it stays light while keeping a solid body and a hardened steel shackle. Brass and stainless peers put more mass on the hasp: the Medeco 5260 has a brass body with a 7/16 inch shackle, and the Sargent 82-856 uses a 2 by 2 inch brass case with a stainless shackle. On a swinging gate or a locker door that gets opened all day, the lighter aluminum body is easier on the hasp; where the lock is exposed to constant weather, the stainless bodied Medeco 521 G8R is the weather-tight alternative.
11) Which padlock keeps the key captive while locked, and does the ABUS 80TI/50 do that?
The Sargent 758 is a key retaining standard padlock in a US4 satin brass finish, so the key cannot be withdrawn while the lock is open - the control most often written into lockout and equipment procedures. Sargent's 858 and the 82-856, a KESO Series padlock with a 2 inch by 2 inch brass case and stainless steel shackle, are both non-key retaining. The ABUS 80TI/50 is a padlock with key in keyed alike or keyed different, with the alloy body and Nano Protect coated shackle suited to gates, lockers, and tool boxes.
12) The hasp opening is tight - will a Sargent 82-856 fit where an ABUS 80TI/50 fits?
Not necessarily. The ABUS 80TI/50 body measures 1-31/32 inch wide with 63/64 inch of horizontal shackle clearance and 1-3/8 inch of vertical clearance, so both the body footprint and the throat are known before the truck rolls. The Sargent 82-856 carries a 2 inch by 2 inch brass case, a larger footprint that can foul a recessed hasp or a close-set staple that the 80TI/50 clears. Measure the hasp eye and the surrounding recess against those numbers rather than swapping one padlock for the other on assumption.
13) Which padlocks ship ready to use versus needing a cylinder supplied separately?
The Medeco 521 G8R is supplied less the pop-out cylinder, so a cylinder has to be ordered and fitted before the lock goes on a gate - normal for a shop that pins its own Medeco cylinders, an extra step for a maintenance crew that is not set up for it. The ABUS 80TI/50 arrives with its 6-pin precision cylinder and key already in the Titalium alloy body, ordered keyed alike where one key should open a run of locks or keyed different where each lock stands alone.
14) Is the ABUS 80TI/50 rated for commercial use or is it a residential padlock?
Commercial. ABUS positions the 80TI for goods at higher risk of theft, and the applications named are commercial ones: cellar doors, gates, cupboards, tool boxes, sheds and switchboards. It is a reasonable standard for an MRO or facilities buyer to fleet across storage cages, gate latches and electrical enclosures, particularly keyed alike so one key covers the run.
15) Is there an electronic or audit-trail padlock option instead of a keyed one like the ABUS 80TI/50?
The 80TI/50 is mechanical only, a 6-pin key cylinder with no electronics. If you need access control on a padlock, credential based rather than key based, the Medeco 54515G XT is the electronic indoor/outdoor padlock in the same use class. Mechanical is still the simpler call for gates, tool boxes and storage where you just need a durable lock on a controlled key group.
16) Will the ABUS 80TI/50 key be easy to use with gloves on?
The 80TI ships with a large tulip-shaped key head, which gives enough purchase to turn with a gloved hand or cold fingers. It is a small detail that shows up on exterior gates and yard enclosures in winter, where a flat stamped key blank is the part that slows a crew down.
How fast can I get the ABUS 80TI/50 C-KA delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ABUS 80TI/50 C-KA come with a warranty?
Absolutely. The ABUS 80TI/50 C-KA is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ABUS 80TI/50 C-KA?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the ABUS 80TI/50 C-KA from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!