You may also like
Adams Rite 4591 Deadlatch Paddle Handle for 4300, 4500, 4900 Series Deadlatches
Model: ADA-4591
Adams Rite 4591 Deadlatch Paddle Handle for 4300, 4500, 4900 Series DeadlatchesErgonomic Push-Pull Door Operation SolutionThe Adams Rite 4591 Deadlatch Paddle provides an ergonomically-friendly...
Adams Rite
Starting at
$294.00
$182.37
Adams Rite 4590 Deadlatch Paddle Handle for 4300, 4500, 4900 Series Deadlatches
Model: ADA-4590
Adams Rite 4590 Deadlatch Paddle Handle for 4300, 4500, 4900 Series DeadlatchesErgonomic Push-Pull Door Operation SolutionThe Adams Rite 4590 Deadlatch Paddle provides an ergonomically-friendly...
Adams Rite
Starting at
$128.00
$78.09
Alarm Lock DL1300NW Trilogy Networx Wireless Electronic Mortise Lock with Keypad for Adams Rite Deadlatches
Model: ALA-DL1300NW
Alarm Lock DL1300NW Trilogy Networx Wireless Electronic Mortise Lock with Keypad for Adams Rite DeadlatchesField-Proven Wireless Access Control for Glass Door ApplicationsTrilogy Networx Narrow Stile...
Alarm Lock
$2,067.59
$980.00
Adams Rite DL100 Aperio Wireless Deadlatch with Integrated Card Reader
Advanced Narrow Stile Electrified Deadlatch with Aperio Wireless Technology
The Adams Rite DL100 Aperio Wireless Deadlatch represents the most advanced narrow stile electrified deadlatch solution, featuring integrated 2.4 GHz Aperio wireless technology and built-in card reader functionality. This fail-secure deadlatch operates on (2) AA lithium batteries and accepts standard 1" length, 1-5/32" diameter mortise cylinders with MS cam. The unit measures 15/16" x 5-13/16" x depth with multiple backset options of 31/32", 1-1/8", and 1-1/2" for versatile installation requirements.
Professional Features & Benefits
- Specifically engineered for narrow stile aluminum doors
- Hollow metal and wood door options available
- Accepts standard Adams Rite MS® cam mortise cylinders
- Multiple finish options: US3, US4, US10B, US32, US32D
- UL Listed models available
- Compatible with Adams Rite electric strikes for access control
- An ASSA ABLOY Group brand
Technical Specifications
- For complete technical specifications, contact Adams Rite at 1-800-626-7590 or visit adamsrite.com.
Installation & Operation
- Verify electrical requirements and confirm (2) AA lithium battery power source. Ensure compatible Aperio hub (AH20, AH30, or AH40) is positioned within 50 feet and through two walls or less.
- Disconnect any existing power sources before beginning installation. Follow all applicable electrical codes and safety procedures for wireless access control devices.
- Mount the deadlatch unit in the specified door preparation ensuring proper backset alignment (31/32", 1-1/8", or 1-1/2") and adequate clearance for wireless signal transmission.
- Configure wireless pairing between DL100 lock and Aperio hub according to manufacturer instructions. Establish encrypted AES 128 bit communication link.
- Program credential support settings for required card types (HID iCLASS, MIFARE, DESFire, HID Prox, mobile access) and configure fail-secure operation parameters.
- Install batteries and test all functions including credential reading, latch operation, status monitoring, tamper detection, and wireless communication with access control system.
- Complete final inspection and document wireless configuration settings. Refer to manufacturer documentation for complete installation instructions, programming procedures, and troubleshooting guidance.
Professional Applications
- Commercial Building Access Control Systems
- Educational Institution Security Networks
- Healthcare Facility Wireless Access Management
- Retail Loss Prevention Systems
- Multi-Tenant Residential Properties
- Government and Municipal Building Security
- Industrial Facility Perimeter Control
Tamper-Resistant Design
The DL100 features integrated tamper monitoring and tamper-resistant construction to prevent unauthorized access attempts. The steel case with corrosion-resistant plating and secure mounting design provides protection against physical manipulation while maintaining reliable wireless communication and credential reading functionality.
Why Choose Adams Rite Quality?
Adams Rite DL100 Aperio deadlatch products deliver professional-grade wireless access control with steel construction featuring corrosion-resistant plating and UL 294 certification for indoor applications. The advanced EcoLatch motorized actuator technology and fully-encrypted AES 128 bit wireless communication ensure reliable performance in demanding commercial environments. Engineered for seamless integration with existing access control systems while eliminating hardwiring costs and installation complexity.
Manufacturer Resources
DL100 Wireless Deadlatch
Product Specs
- Series:
- DL100 Series
- Cylinder Included:
- No
- Subcategory:
- Deadlatches
- Product Group:
- Parts and Accessories
- Product Subgroup:
- Latches
- Commercial/Residential:
- Commercial
- Cylinder and Keyways:
- Mortise Cylinder
- Duty Level:
- Standard Duty
- Latch Throw:
- 5/8"
- Product Model:
- DL100
- Door Thickness Range:
- 1-3/4"
- Product Dimension:
- 15/16" x 5 13/16" x depth
- Latch Specification:
- 5/8" x 1" x 5/8"
- Product Category:
- Parts and Accessories
- Department:
- Door Hardware
- Product Type:
- Deadlatches
Adams Rite DL100-3201-IPS-628 – Frequently Asked Questions
1) Will the Adams Rite DL100 Aperio deadlatch fit a narrow stile aluminum storefront door?
Narrow stile aluminum doors are what the DL100 is built for. The lock case measures 15/16 x 5-13/16 inches by depth, so it drops into the narrow stile pocket rather than needing a wide stile lock prep. Backsets come in 31/32 inch, 1-1/8 inch, and 1-1/2 inch to match the stile you have. Hollow metal and wood door versions are also offered.
2) Which backset do I order for an Adams Rite DL100 deadlatch, and how do I know which one I need?
Three backsets are offered on the DL100: 31/32 inch, 1-1/8 inch, and 1-1/2 inch. The backset is measured from the face of the stile to the center of the cylinder hole, so pull the existing Adams Rite latch or measure the prep in the door and match it. Get this wrong and the cylinder will not line up with the hole in the stile, no matter which finish or strike you pick.
3) Does the Adams Rite DL100 come with a cylinder, and what cylinder do I need to buy with it?
No cylinder is included. The DL100 takes a standard mortise cylinder, 1 inch length, 1-5/32 inch diameter, with an Adams Rite MS cam. Order it separately in the keyway your building is keyed to, and match the finish to the lock if the cylinder shows on the outside face.
4) Will the DL100 latch into the strike that is already in my jamb?
Plan on replacing the strike. The DL100 throws a 5/8 inch latch, with a latch body of 5/8 x 1 x 5/8 inches, and it is ordered with a matched strike rather than reused into an unknown prep. Strikes come mortise or surface mount, in four shapes and lip lengths: flat for a standard jamb, radius for standard stiles, and flat center hung for a 4 inch or a 4-1/2 inch jamb. Measure your jamb depth and note whether the door is center hung or offset pivot before you pick.
5) Do I have to run wire to the door for the Adams Rite DL100 Aperio lock?
No wiring to the door. The DL100 runs on two AA lithium batteries and talks to the access control system over 2.4 GHz Aperio wireless with AES 128 bit encryption. That is the whole point of the device: no power transfer hinge, no door loop, no conduit back to the panel. You do need an Aperio hub (AH20, AH30, or AH40) within 50 feet and through no more than two walls.
6) What happens to the DL100 deadlatch if the batteries die or the wireless link drops?
Fail-secure. The latch stays locked from the outside when power or communication is lost, so the opening does not free up on a dead battery. Free egress from the inside comes from whatever exit device or paddle is on the door, not from the latch. If your fire or life-safety plan needs the opening to unlock on power loss, this is the wrong device.
7) What is the difference between the Adams Rite DL100 deadlatch and the BEST 6KL latch?
They solve different problems at the door. The Adams Rite DL100 is a wireless access control deadlatch with an integrated card reader, built for narrow stile aluminum doors, running on (2) AA lithium batteries and communicating over 2.4 GHz Aperio wireless to an AH20, AH30, or AH40 hub within 50 feet. The BEST 6KL is a deadlocking latch of Grade 2 with steel construction, a mechanical latch with no credential reading or wireless component. If the opening needs card or mobile credentials at the door itself, the DL100 carries that function; if the opening only needs a deadlocking latch driven by separate hardware, the 6KL is the mechanical part.
8) What card credentials does the Adams Rite DL100 integrated reader accept?
The built-in reader handles HID iCLASS, MIFARE, DESFire, HID Prox, and mobile credentials. If your building is already issuing one of those, the existing cards work at this door without reissuing badges. The reader is integrated into the lock, so there is no separate wall reader to mount or wire.
9) Is the Adams Rite DL100 UL listed for access control?
UL 294 certification is stated for indoor applications. That is the access control system units standard, which is what a spec writer on an institutional job will be looking for on an electrified lock. Nothing here should be read as a fire door rating.
10) Can I standardize on the DL100 for every door in the building, or only some?
Standard duty, commercial rated, and UL 294 for indoor use. That suits offices, tenant suites, classrooms, and back-of-house doors on a card system. For a high-traffic main entrance taking constant abuse, or an exterior opening exposed to weather, spec accordingly rather than assuming this covers the whole fleet. Where you only need a mechanical deadlatching latch without a reader, the BEST 6K Series deadlocking latch is a straight mechanical option.
11) If I do not need card access at the door, what should I use instead of the Adams Rite DL100?
The DL100 puts the credential reader, the motorized actuator, and the battery power in the latch itself, which is what you pay for when the opening has to read HID iCLASS, MIFARE, DESFire, HID Prox, or mobile credentials at the door. For an opening that only needs a deadlocking latch, the BEST 6KL Grade 2 deadlocking latch with steel construction covers the mechanical latching function without the wireless and reader hardware. Confirm the door preparation matches before specifying, since the DL100 is engineered for narrow stile aluminum doors.
12) What finishes does the Adams Rite DL100 deadlatch come in for storefront doors?
Three anodized finishes are offered: 628 clear anodized, 313 dark bronze anodized, and 335 black anodized. Those are the aluminum storefront standards, so the lock face matches the door frame rather than the lever hardware. Clear anodized reads as the common mill aluminum look, dark bronze for the bronze storefront systems.
13) Can the DL100 work with an electric strike instead of, or alongside, the lock's own control?
Adams Rite electric strikes are called out as compatible for access control. That matters on a pair or on a door where the release needs to happen at the frame, for instance an intercom or REX release into an existing panel. The DL100 itself is ordered with a mechanical strike, mortise or surface mount, in the shape that matches your jamb.
14) Is the Adams Rite DL100 tamper resistant on an exterior-facing tenant door?
Tamper monitoring is built in and reports through the wireless link, so an attack on the lock shows up at the access control system rather than going unnoticed. The case is steel with corrosion-resistant plating. Note the UL 294 listing covers indoor applications, so treat weather-exposed openings on their own merits.
How fast can I get the Adams Rite DL100-3201-IPS-628 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Adams Rite DL100-3201-IPS-628 come with a warranty?
Absolutely. The Adams Rite DL100-3201-IPS-628 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Adams Rite DL100-3201-IPS-628?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Adams Rite DL100-3201-IPS-628 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.