You may also like
Manufacturer Resources
Product Specs
- Body Material:
- FRPP
- Connection Type:
- Universal
- Fitting Name:
- Sink Tailpiece Loose Nut Adapter with Extension
- Series:
- Sink Tailpiece Adapters Universal
- Wall Thickness:
- 0.15 IN
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Valves
- Product Type:
- General Valve
- Pipe Size Dimension:
- 1 1/2 IN
Watts 710024 – Frequently Asked Questions
1) Will the Watts 710024 sink tailpiece adapter work with 1-1/2 inch drain piping?
Yes. The 710024 is sized for 1-1/2 inch pipe, which is the standard commercial sink drain size, and it uses a loose nut connection so it threads onto the sink strainer or basket outlet without soldering or glue. If your trap arm and P-trap are 1-1/2 inch, this drops straight in.
2) What is the 12 inch extension on the Watts 710024 tailpiece for?
It gives you reach. A 12 inch tailpiece extension drops the connection point down from the sink strainer so the trap can be set lower, which is what you need on a deep bowl, a low-set trap arm, or an ADA lavatory where the waste has to clear knee space. If your trap sits close under the basket, a shorter tailpiece is the better call.
3) Is the Watts 710024 tailpiece plastic or metal, and will it hold up in a commercial kitchen?
It's plastic, specifically FRPP (fiberglass reinforced polypropylene), with a 0.15 inch wall. FRPP is the material used where drain lines see chemical and hot waste that would attack thin-wall chrome brass, so it's a common pick for lab, food service, and institutional waste runs. If you need an exposed chrome finish under an open lavatory, this is not that part.
4) Do I need to buy a nut and washer separately for the Watts 710024?
No separate slip nut purchase for the strainer end. The 710024 is a loose nut adapter, meaning the nut rides free on the tailpiece so you can spin it up onto the sink strainer threads after the tube is positioned. You'll still need a trap or trap adapter at the bottom end, sized 1-1/2 inch to match.
5) What does the universal connection on the Watts 710024 tailpiece adapter mean for my existing trap?
Universal connection means the adapter is built to mate across the common 1-1/2 inch waste connections rather than being cut for one manufacturer's system, so it can tie a plastic tailpiece into the trap you already have. Confirm your trap inlet is 1-1/2 inch and the joint is a slip/nut type rather than solvent weld.
6) What is the exact part number for the Watts Blueline 12 inch sink tailpiece adapter?
Watts 710024, from the Sink Tailpiece Adapters Universal series. It's the 1-1/2 inch loose nut tailpiece adapter with the 12 inch extension, Blueline. That number is what to quote when you're matching replacements across a building so every sink gets the same part.
How fast can I get the Watts 710024 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Watts 710024 come with a warranty?
Absolutely. The Watts 710024 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Watts 710024?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Watts 710024 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.