You may also like
AL HTYPE COMP CONN 1/0-3ASCR 1SLD
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- None
- Number Of Conductors:
- 2
- Product Group:
- Wire & Cable Management
- Product Type:
- H-Type Compression Tap Connector
- Selling Unit Of Measure:
- each
- Standards:
- RUS Accepted. Complies with ANSI C119.4 Specifications
- Temperature Range:
- up to 90 °C
- Type2:
- Wire connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Size:
- Length 1-3/4 inch
- Installation Category:
- None
Blackburn WR199 – Frequently Asked Questions
1) What wire sizes does the Blackburn WR199 H-tap connector take on the run and the tap?
The WR199 is sized for a 1/0 ACSR main run with a #1 solid tap. It is a two-conductor H-type compression tap, so it joins one run conductor to one tap conductor, not multiple taps. Aluminum bodied, so it is intended for aluminum conductor work.
2) Is the WR199 crimped or bolted?
Compression only. The WR199 is a crimp connector, so you need the matching compression tool and die to install it; there are no bolts or set screws to torque. Once crimped it is a permanent connection.
3) What standards does the Blackburn WR199 meet for utility and secondary distribution work?
It is RUS Accepted and complies with ANSI C119.4, which is the standard for connectors used on aluminum and copper distribution conductors. That is the pair of acceptances utility and co-op inspectors typically look for on secondary taps.
4) Can I use the WR199 to tap a #1 stranded or larger conductor?
No. The tap side is sized for #1 solid and the run side for 1/0 ACSR. A compression connector only performs within its listed conductor range, so a different stranded or larger tap needs the H-tap sized for that combination. Do not oversize or double up conductors in the barrel.
5) Does this Blackburn H-tap come insulated, or do I have to cover it myself?
Bare metal, no insulation on the connector. Any covering the job calls for, tape, a cover, or a shrink boot, is a separate item you supply.
6) What conductor temperature is the WR199 tap rated to?
Up to 90 degrees C, so it suits 90 C rated conductor insulation systems such as XHHW-2 or USE-2 aluminum runs.
7) How much room do I need in the pedestal or handhole for this connector?
The body measures 1-3/4 inches in length, so it fits tight secondary boxes, pedestals and handholes where a bolted split-bolt or mechanical tap would be bulkier. Allow room for the crimp tool head as well as the connector itself.
8) Is the WR199 sold individually or in a bag?
Sold each, so quantities are counted per connector. Order one per tap point and add spares, since a miscrimped compression connector has to be cut out and replaced.
9) What is the manufacturer part number and country of origin for this Blackburn H-tap?
Blackburn part number WR199, made in Mexico. That is the number to quote when matching what is already installed on a feeder or reordering to a utility's approved materials list.
How fast can I get the Blackburn WR199 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn WR199 come with a warranty?
Absolutely. The Blackburn WR199 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn WR199?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn WR199 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.