You may also like
AL MULTI SAMESIDE CONN 6PORT 350-10
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Group:
- Wire & Cable Management
- Product Type:
- Multi-Tap/Port Connector
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809, CSA 6591
- Temperature Range:
- 90 °C
- Type2:
- Electrical taps
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Color:
- Black
- Product Material:
- Aluminum
Blackburn AMTS350106 – Frequently Asked Questions
1) What wire range does the Blackburn AMTS350106 6-port multi-tap connector accept?
The AMTS350106 covers 350 kcmil down to 10 AWG conductors across all six ports, which is where the "350-10" in the catalog number comes from. All six ports enter from the same side, so run conductors in from one direction only.
2) Is this tap connector rated for 600 volt service and 90 degree C wire?
Rated 600 V and 90 degrees C, so it works on standard 600 V distribution and won't be the limiting element on THHN or XHHW-2 run at its 90 C rating. It's UL listed under E9809 and CSA certified under 6591.
3) Can I use an aluminum multi-tap connector on copper conductors too?
The body is aluminum, which is the standard AL9CU-style dual-rated construction used for both aluminum and copper conductors in this class of tap connector. If your job spec calls out a copper-only connector, verify the marking stamped on the block before install.
4) Why choose a same-side 6-port tap connector instead of a two-sided version?
Same-side entry means every conductor lands from one direction, which suits a gutter, trough, or panel where the feeder and all the taps approach from the same face. A two-sided block splits ports between opposing faces and is the better pick when the main comes in one end and taps leave the other. With six ports at 350 kcmil to 10 AWG, this one is built for distributing a single large feeder to multiple smaller branch or tap conductors.
5) Does the AMTS350106 need to be insulated or covered after installation?
The block is a bare aluminum mechanical connector, so it has to be installed in an enclosure, gutter, or covered with an insulating cover or tape system rated for 600 V. It is sold individually, one connector per order, with no cover included.
6) Is the Blackburn AMTS350106 made in the USA for Buy American jobs?
Country of origin is the United States, which matters on federally funded and government MRO work with domestic-content requirements. Order it by manufacturer part number AMTS350106.
7) Can I land fewer than six conductors in this multi-tap block?
Yes, unused ports can be left empty on a six-port mechanical tap connector, so the same block serves a feeder with three or four taps today and leaves room for later additions. Each port takes anything from 350 kcmil down to 10 AWG, so the taps do not have to be the same size as each other.
How fast can I get the Blackburn AMTS350106 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn AMTS350106 come with a warranty?
Absolutely. The Blackburn AMTS350106 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn AMTS350106?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn AMTS350106 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.