You may also like
AL SERVENTR SPLICE A:4/0 B:1/0 5.5
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- United States (US)
- Insulation Material:
- Yes
- Number Of Conductors:
- 2
- Product Group:
- Wire & Cable Management
- Product Type:
- Compression Splice Service Entrance
- Selling Unit Of Measure:
- each
- Standards:
- RUS Listed. Passes the Requirements of ANSI C119.4
- Type2:
- Wire or cable compression splice
- Department:
- Electrical
- Product Subgroup:
- Splices
- Product Size:
- Splice 4 inch, Sleeve 5-1/2 inch
- Installation Category:
- None
- Product Material:
- Aluminum
Blackburn IKL66 – Frequently Asked Questions
1) What conductor sizes does the Blackburn IKL66 service entrance splice take on each side?
The IKL66 is a two-conductor splice with different sizes on each end: side A takes 4/0 and side B takes 1/0. That makes it the part to use when you are reducing from a 4/0 service conductor to a 1/0 run, not a same-size butt splice.
2) Is the IKL66 splice for aluminum conductors or copper?
It is an aluminum-bodied service entrance splice, so it is built for aluminum conductor work such as URD and service entrance cable. If your run is copper, look for a copper-bodied compression splice instead.
3) Does the Blackburn IKL66 need a crimp tool, or can it be tightened with a wrench?
It is a compression splice, so it has to be crimped with the proper hydraulic or battery compression tool and die set. There are no set screws to torque, and the tool is not included with the connector.
4) Does the IKL66 splice meet ANSI C119.4 for underground and direct-buried connections?
Yes. The IKL66 passes the requirements of ANSI C119.4 and is RUS Listed, which is what utility and co-op specs normally call for on service entrance and secondary connections.
5) How long is the IKL66 splice body, and will it fit inside my pedestal or handhole?
Splice length is 4 inches with a 5-1/2 inch sleeve, so plan on roughly 5-1/2 inches of straight, unobstructed length plus bending room for the conductors when you are working in a meter socket, pedestal, or handhole.
6) Is the Blackburn IKL66 insulated, or do I have to tape and re-insulate the splice?
The IKL66 comes with insulation over the connector, so you are not building the whole insulation system from tape at the joint. Standard practice still applies for sealing and moisture protection in wet or buried locations per your utility spec.
7) Is the Blackburn IKL66 sold individually or in a box?
It is sold each, one splice per unit, so order the exact count of joints you have to make.
8) Is the Blackburn IKL66 made in the USA for a Buy American job?
Country of origin on the IKL66 is the United States, which is what a government, utility, or federally funded project usually needs documented on submittal.
How fast can I get the Blackburn IKL66 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn IKL66 come with a warranty?
Absolutely. The Blackburn IKL66 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn IKL66?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn IKL66 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.