Alarm Controls DL2EC Door Loop Accessory

The DL2EC is the end cap for the Alarm Controls DL-2 door loop, and nothing else. It is a replacement or spare part, not a complete loop assembly. If you need the armored cable loop itself for running wiring from the frame to the door, order the DL-2 door loop; the DL2EC only covers the cap.

It is made for the Alarm Controls DL-2 door loop. Fit on any other manufacturer's loop isn't something to assume. If you're patching up a mixed set of openings, match the cap to the DL-2 loops specifically and source caps from the original maker for the others.

That's exactly what the DL2EC is for. Alarm Controls sells the end cap for the DL-2 separately, so a damaged or missing cap doesn't force you to pull and rewire the entire loop. Handy for property managers keeping a few on the shelf for access-controlled doors that see heavy traffic.

Yes, it's a commercial-grade part, cataloged for commercial use alongside the rest of the Alarm Controls electronic access control line. Typical use is on access-controlled doors in office, institutional, and multi-family buildings where an electric strike, maglock, or electrified lock needs wiring carried across the hinge gap.

A door loop is a power transfer device. It carries low-voltage wiring from the frame to the door so an electrified lock, exit device, or request-to-exit sensor on the door leaf stays connected as the door swings, and it protects that wiring from being pinched or cut. The Alarm Controls DL2EC is the end cap portion of the DL-2 loop, which is the trim piece that finishes the cable termination at the frame or door.