Alarm Lock DL1300ET Electronic...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,348.59
$593.73
Alarm Lock Alarm Lock DL1300ET - Exit Trim Narrow Stile Pushbutton Aluminum Door Trim Retrofit Glass Doors with Latch Locks, Satin Chrome Finish ALA-DL1300ET/26D

Alarm Lock DL1300ET Electronic Exit Trim, Narrow Stile Glass Door Retrofit, Adams Rite Compatible, Satin Chrome

(No reviews yet) Write a Review

Model: DL1300ET26D
$1,348.59
$593.73
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,348.59
$593.73
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Alarm Lock DL1300ET Electronic Exit Trim — Narrow Stile Glass Door Retrofit

The Alarm Lock DL1300ET is a battery-operated electronic keypad exit trim engineered specifically for narrow stile glass door retrofit applications. It delivers 2,000-user access control with a 40,000-event audit trail in a vandal-resistant aluminum housing rated for extreme environments — no wiring to a power supply required.

Compatible with Adams Rite 1850, 1950, 4710, 4070, 4730, and 4900 series spring latches and MS18505 & MS19505 series deadbolts. Also works with Arrow, DCI, Von Duprin, Corbin, Dor-o-matic, Dorma, and Jackson panic exit devices. All narrow stile and exit lock configurations are weather resistant.

⚠ Installation Note: ET Trim is compatible with V33 LH (RHR) only. Confirm door handing before ordering.

Key Features

  • 2,000 User Code Capacity: Supports master, manager, basic user, and multiple one-time user codes for layered access control in commercial environments.
  • 40,000-Event Audit Trail: Logs access events by user; 500-event schedule with real-time clock enables automated lock/unlock scheduling.
  • Multiple Backset Options: Accommodates 31/32 in., 1-1/8 in., and 1-1/2 in. backsets for versatile retrofit installations.
  • Long-Life Battery Operation: Powered by 2 DL123A lithium batteries rated for 100,000 cycles typical; low battery alert included.
  • Extreme Temperature Rating: Operates from -31°F to +151°F — suitable for vestibules, exterior glass entries, and unconditioned spaces.
  • Non-Handed Design: Fully field-reversible; simplifies installation and reduces inventory requirements.
  • Key Override: Supplied with 6-pin mortise cylinder (SC1 keyway); accepts 1-3/8 in. or 1-1/2 in. cylinders; supports interchangeable cores and master key systems.
  • Vandal-Resistant Keypad: All-metal 12-button keypad supports 3–5 digit PIN codes.

Technical Specifications

  • Finish: US26D — Satin Chrome
  • Door Thickness: 1-3/4 in. only
  • Handing: Non-handed (V33 LH / RHR only — see installation note above)
  • Backset: 31/32 in., 1-1/8 in., 1-1/2 in.
  • Power: 2 × DL123A lithium batteries
  • User Codes: 2,000 (master, manager, basic user, one-time)
  • Audit Trail: 40,000 events by user; 500-event schedule with real-time clock
  • Battery Life: 100,000 cycles typical
  • Operating Temperature: -31°F to +151°F
  • Keypad: All-metal, vandal-resistant, 12-button; 3–5 digit PIN
  • Cylinder: 6-pin mortise, SC1 keyway; accepts 1-3/8 in. or 1-1/2 in. cylinders
  • Compatible Latches/Deadbolts: Adams Rite 1850, 1950, 4710, 4070, 4730, 4900 series spring latch; MS18505 & MS19505 series deadbolts
  • Compatible Exit Devices: Arrow, DCI, Von Duprin, Corbin, Dor-o-matic, Dorma, Jackson

Product Specs

Series:
DL1300 Series
Power:
Battery Operated
Application:
Pushbutton Keypad
Lock Type:
Cylindrical
Product Group:
Mechanical Locks
Product Subgroup:
Mortise Locks and Trim
Subcategory:
Mortise Locks
Reader Type:
Keypad
Product Type:
Exit Device Trim
Commercial/Residential:
Commercial
Battery Operated:
Yes
Batteries:
2 DL123A lithium batteries
Stile Type:
Narrow Stile
Audit Trail:
Yes
User Codes:
2,000
Electronic:
Yes
Product Attribute:
Electronic Locks
Backset (Distance):
31/32 ,1-1/8 and 1-1/2
Product Category:
Electronic Locks
Department:
Door Hardware

Alarm Lock DL1300ET26D – Frequently Asked Questions

1) Will the Alarm Lock DL1300ET fit my narrow stile aluminum glass door with an Adams Rite latch?
That's exactly the application the DL1300ET is built for. It's a narrow stile electronic exit trim that works with Adams Rite 1850, 1950, 4710, 4070, 4730 and 4900 series spring latches, plus the MS18505 and MS19505 deadbolts. It covers 31/32 in., 1-1/8 in. and 1-1/2 in. backsets, which are the standard narrow stile backsets on aluminum storefront. Door thickness is 1-3/4 in. only.
2) Is the DL1300ET exit trim handed, and which handing do I order?
Read the handing note carefully, because the trim contradicts itself if you skim it. The DL1300ET is described as non-handed and field reversible, but the ET trim is compatible with V33 LH (RHR) only. Confirm the door swing before you order. Handing is the single most common reason this trim goes back.
3) Can I put the DL1300ET keypad trim on my existing Von Duprin or Jackson panic device?
Yes. Besides the Adams Rite latches, the DL1300ET works with Arrow, DCI, Von Duprin, Corbin, Dor-o-matic, Dorma and Jackson panic exit devices. The device stays on the push side and the keypad trim controls entry from outside, so you keep free egress and add code access without replacing the panic hardware.
4) Do I need to run power to the DL1300ET, or does it run on batteries?
No wiring, no power supply, no transformer. The DL1300ET runs on 2 DL123A lithium batteries with a typical life of 100,000 cycles and a low battery alert. That's why it's used on glass storefront entries, where getting a wire across an aluminum door and through a hinge or door loop is the hard part of the job.
5) Does the DL1300ET come with a key override cylinder, and can I key it into my existing system?
A 6-pin mortise cylinder in SC1 keyway ships with the trim, so there's a mechanical override if batteries die or a code is forgotten. It accepts 1-3/8 in. or 1-1/2 in. cylinders and supports interchangeable cores and master key systems, so a locksmith can swap in a cylinder to match an existing masterkey system. Keying is specified when you order: keyed different, keyed alike, or to a key code you supply.
6) Will the DL1300ET work on a 1-3/8 inch door?
No. The DL1300ET is a 1-3/4 in. door thickness only trim. Standard commercial aluminum storefront doors are 1-3/4 in., so most narrow stile openings are fine, but a thinner door needs different hardware.
7) Will an electronic keypad lock hold up on an exterior glass door in a cold climate?
The DL1300ET is rated from -31 degrees F to +151 degrees F, and the narrow stile and exit lock configurations are weather resistant. That covers unheated vestibules, exterior storefront entries and unconditioned spaces. The keypad is all-metal and vandal resistant, which matters on an unattended exterior door.
8) How many codes can the DL1300ET hold, and can I tell who came through the door?
Capacity is 2,000 user codes, split across master, manager, basic user and one-time codes, with PINs of 3 to 5 digits. The lock logs 40,000 events by user, and a 500-event schedule with a real-time clock lets you set automatic lock and unlock times. For a property manager running a multi-tenant entry, that means individual codes per tenant or vendor and a record of who used them, rather than one shared code everyone knows.
9) What do I have to specify when ordering the DL1300ET keypad exit trim?
Three things settle the order. Finish is US26D Satin Chrome. Keying is a required selection: keyed different, keyed alike, or a specific key code you enter. And handing, since the ET trim is V33 LH (RHR) only. The backset is not an order option, the trim accommodates 31/32 in., 1-1/8 in. and 1-1/2 in.
10) Should I use an electronic exit trim like the DL1300ET or replace the whole lock on my storefront door?
Keep the existing latch and panic device if it still works. Exit trim mounts on the pull side and drives the latch you already have, so a DL1300ET turns a keyed storefront entry into a 2,000 code keypad entry without touching the glass, the stile prep or the exit device. Replacing the lock means new door prep on an aluminum stile, which is the expensive part. Go to a full lock replacement only if the existing Adams Rite latch or panic hardware is worn out or is not one of the compatible series.
How fast can I get the Alarm Lock DL1300ET26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Alarm Lock DL1300ET26D come with a warranty?
Absolutely. The Alarm Lock DL1300ET26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Alarm Lock DL1300ET26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Alarm Lock DL1300ET26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!