Metallics WAK15QDB Anchor 1/4"...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$87.11
$50.16

Metallics WAK15QDB Anchor 1/4" Light Duty Blue Wall Anchor Kit w/ 12 x 1-1/4 Quadrive 5/16 Hex Head Screw USA SCREW ONLY

(No reviews yet) Write a Review

Model: WAK15QDB
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$87.11
$50.16
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Anchor 1/4" Light Duty Blue Wall Anchor Kit w/ 12 x 1-1/4 Quadrive 5/16 Hex Head Screw USA SCREW ONLY

Manufacturer Resources

Product Specs

Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws

Metallics WAK15QDB – Frequently Asked Questions

1) Will a 1/4 inch light duty blue anchor hold in drywall for electrical boxes or conduit straps?
It is a light duty anchor, so treat it that way. The WAK15QDB 1/4 inch blue anchor with a #12 x 1-1/4 screw suits low-load work such as straps, small device plates, raceway and signage in hollow drywall or plaster. For heavier electrical gear, panels, or anything carrying cable weight or vibration, step up to a toggle or a masonry anchor into solid substrate.
2) What screw comes with the Metallics WAK15QDB blue wall anchor kit?
The WAK15QDB kit is built around a #12 x 1-1/4 inch hex head screw with a Quadrive recess and a 5/16 inch hex head. That means you can run it with a 5/16 nut driver or socket, or drive it with the Quadrive recess if you prefer a bit. It pairs with the 1/4 inch light duty blue wall anchor.
3) What size hole do I drill for a 1/4 inch blue plastic wall anchor?
Drill to match the anchor body. The Metallics WAK15QDB uses a 1/4 inch light duty blue wall anchor, so the pilot hole is sized to the 1/4 inch anchor diameter and the anchor is tapped flush before the #12 x 1-1/4 screw is driven in to expand it.
4) Is the WAK15QDB screw long enough to go through a 1/2 inch drywall and still grab?
Yes. At 1-1/4 inches, the #12 screw passes through 1/2 inch board plus the fixture and still has length left to expand the 1/4 inch anchor behind it. If the item you are mounting is thick, measure your fixture: anything over about 1/2 inch of standoff eats into the thread engagement in the anchor.
5) Can I drive these anchor screws with a cordless impact or do I need a hand driver?
The 5/16 hex head takes a nut setter in a drill or impact, and the Quadrive recess in the same head gives you a second option if the head is in a tight spot. Back off the clutch: these are plastic light duty anchors and overdriving spins them in the hole.
How fast can I get the Metallics WAK15QDB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics WAK15QDB come with a warranty?
Absolutely. The Metallics WAK15QDB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics WAK15QDB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics WAK15QDB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.