You may also like
Anchors 10 Dr-Type Tog Ancr Plas, St-zn Kit (Clam 50)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Clamshell
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics EZT1K – Frequently Asked Questions
1) What size screw does the Metallics EZT1K toggle anchor kit take?
The EZT1K kit is built around a #10 drive-type toggle anchor, so it is sized for a #10 screw. The kit pairs the plastic toggle bodies with steel zinc-plated screws, so you are not sourcing fasteners separately.
2) Is the Metallics EZT1K anchor meant for drywall or for solid concrete?
It is a hollow-wall anchor. A drive-type toggle anchor works by passing through drywall or hollow block and toggling out behind the panel, so it needs a void on the back side to grip. For solid concrete, brick, or grout-filled block there is nothing to toggle into, and you want a sleeve, wedge, or screw-type masonry anchor instead.
3) Does the Metallics EZT1K come as a kit with screws, or just the anchors?
It ships as a kit: the plastic toggle anchors plus steel zinc-plated screws, 50 pieces to the pack. Nothing else is required to hang the fixture beyond a drill bit sized for the anchor.
4) Will the zinc-plated screws in the EZT1K kit hold up in a damp location?
The screws are steel with zinc plating, which is a general indoor corrosion coating. It is fine for conditioned interiors, drop ceilings, and dry utility spaces. For wet, exterior, or coastal work, specify a stainless anchor and screw rather than zinc-plated steel.
5) How are the Metallics EZT1K anchors packaged for counter or van stock?
They come 50 to a clamshell pack, which is the format most electrical and maintenance buyers keep on the truck or on a retail peg. One pack covers a run of box, strap, and light-fixture mounting without opening bulk cartons.
6) What are #10 drive-type toggle anchors typically used for on electrical work?
They are a hollow-wall fastener for light to moderate loads: mounting device boxes, low-voltage brackets, raceway and wire-management straps, and small fixtures on drywall. Metallics catalogs the EZT1K as an electrical-trade fastener, and the #10 screw size is the common pick for that kind of surface-mount hardware.
How fast can I get the Metallics EZT1K delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics EZT1K come with a warranty?
Absolutely. The Metallics EZT1K is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics EZT1K?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics EZT1K from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.