You may also like
Anchors 1/4-20 Strap-Tog Ancr St-zn (Bag 50)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Bag
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics NT14 – Frequently Asked Questions
1) What bolt or machine screw size does the Metallics NT14 strap toggle take?
The NT14 strap toggle is sized for 1/4-20 threaded fasteners, so the bolt or machine screw you run into it has to be 1/4 inch diameter with 20 threads per inch. A 1/4-20 all-thread rod stub works the same way. If your hanger, strut clip, or fixture bracket is drilled for a 5/16 or 3/8 bolt, this is the wrong anchor for it.
2) What kind of wall is a strap toggle anchor like the Metallics NT14 used on?
Strap toggles are hollow wall anchors. They go through a single drilled hole in drywall, plaster, block, or hollow tile, the metal channel flips behind the wall, and you snap off the plastic straps once it is drawn tight. That makes the NT14 the right pick when you only have access to the front face, which is the usual case for hanging boxes, raceway, fixture brackets, and cable hangers on finished walls or ceilings. If you are fastening into solid concrete, use a wedge or sleeve anchor instead, and if you can land on wood framing or steel stud, a direct screw is the cheaper answer.
3) How many anchors come in a bag of Metallics NT14?
Fifty per bag, supplied loose in a poly bag rather than carded. For an electrician running a floor of fixture mounts or box supports, that is one bag per roughly fifty hole locations, since each anchor serves one 1/4-20 fastener.
4) Are Metallics NT14 toggle anchors zinc plated, and can they go outdoors?
The NT14 is steel with a zinc plating, abbreviated St-zn on the part description. Zinc plated steel is a dry interior finish. It is fine for conditioned interior walls and ceilings, but for exterior walls, washdown areas, coastal exposure, or anywhere it will see standing moisture you want a stainless toggle instead, because the plating will eventually give up and the channel is the part carrying your load.
5) Do I need to buy the bolts separately for a strap toggle anchor?
Yes. A strap toggle supplies the toggle channel and the plastic straps only, so the 1/4-20 bolt, machine screw, or rod and any washer come from your own stock. Match the screw length to the wall thickness plus whatever you are fastening through, since the channel sits flat on the back face of the wall.
6) What is the Metallics part number for the 1/4-20 strap toggle anchor?
Order it as Metallics NT14. That is the catalogue number and the manufacturer part number for the 1/4-20 steel zinc strap toggle, bagged 50.
How fast can I get the Metallics NT14 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics NT14 come with a warranty?
Absolutely. The Metallics NT14 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics NT14?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics NT14 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.