You may also like
Anchors 1/4 Bl Wall Kit 10 x 1 HWH SL TS SS (Clam 200)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics WAK14HBSS – Frequently Asked Questions
1) What comes in the Metallics WAK14HBSS 1/4 wall anchor kit?
The WAK14HBSS is a 1/4 inch hollow wall anchor kit packed with matching #10 x 1 inch screws, supplied in a 200-piece clamshell. The screws are hex washer head with a slotted drive and are stainless steel, so anchor and fastener come together and you are not sourcing screws separately for the job.
2) Are these hollow wall anchors or concrete anchors?
Hollow wall. The WAK14HBSS kit is a 1/4 inch hollow wall anchor set, meant for drywall, plaster and similar panel material where there is a cavity behind the surface. For solid masonry or concrete you want a sleeve, wedge or screw anchor instead, not this kit.
3) Are the screws in this Metallics anchor kit stainless steel?
Yes, the #10 x 1 inch screws in the WAK14HBSS kit are stainless steel with a hex washer head and a slot, so they can be driven with a nut driver or a flat blade. Stainless matters if the fasteners are going somewhere damp, coastal or washed down.
4) Will a 1/4 inch hollow wall anchor hold a small electrical box or raceway on drywall?
That's exactly what this kit is packaged for. Metallics catalogs the WAK14HBSS as an electrical fastener, and a 1/4 inch toggle-style hollow wall anchor with a #10 x 1 inch screw is the usual way light devices, straps, small boxes and raceway get hung on drywall where no stud lines up. For anything heavy or load-bearing, mount to structure instead.
5) How many pieces are in a clamshell of Metallics WAK14HBSS?
200 per clamshell. It's a bulk pack for service vans and MRO stock rather than a small job blister, so one clamshell covers a lot of device and strap mounting before you reorder.
6) What drive do the screws in the WAK14HBSS kit take?
Slotted hex washer head. The hex lets you run them with a 5/16 or 3/8 nut driver in tight ceiling and panel work, and the slot gives you a flat-blade backup when there's no driver on the belt.
How fast can I get the Metallics WAK14HBSS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics WAK14HBSS come with a warranty?
Absolutely. The Metallics WAK14HBSS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics WAK14HBSS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics WAK14HBSS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.