You may also like
Anchors 1/4 Gry Plas Wall Ancr Kit, 10 (Jar 200)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics WAKJ23 – Frequently Asked Questions
1) What size anchor is in the Metallics WAKJ23 plastic wall anchor kit?
The WAKJ23 kit is built around 1/4 inch gray plastic wall anchors, packed as a jar of 200. One size throughout, so there is no mixed-diameter sorting on the van.
2) Are the Metallics WAKJ23 plastic anchors meant for hollow drywall or solid masonry?
These are plastic wall anchors, the expansion type you set into a drilled hole and tighten a screw into. They work in solid substrates like masonry, block, and plaster where the hole walls hold the anchor body. Open hollow drywall between studs is a different problem and calls for a toggle or self-drilling drywall anchor instead.
3) Is the Metallics WAKJ23 anchor kit a bulk pack or a small count?
It is a bulk jar of 200 anchors, which suits an MRO crib or a contractor stocking the truck rather than a single device mount. If you only need a handful for one box or bracket, a jar of 200 is more than the job needs.
4) Will 1/4 inch gray plastic anchors hold a conduit strap or device box on block wall?
Yes, that is the normal use for a 1/4 inch plastic anchor: light electrical work such as one-hole and two-hole conduit straps, device boxes, small junction boxes, and low-voltage brackets fastened to solid wall. For heavier loads, threaded rod support, or anything carrying overhead weight, step up to a mechanical or wedge anchor.
5) What drill bit size do I use with a 1/4 inch plastic wall anchor?
Drill to match the anchor body diameter, which for a 1/4 inch plastic anchor is a 1/4 inch masonry bit. Drill the hole deeper than the anchor length so dust can settle, tap the anchor in flush, then drive the screw to expand it.
6) Does the Metallics WAKJ23 anchor kit come with screws?
The WAKJ23 is a wall anchor kit of 1/4 inch gray plastic anchors in a 200-count jar. Plan on supplying the screws sized to the anchor for your own fastening, and the masonry bit to drill with.
7) How do I order the Metallics 1/4 inch plastic wall anchor jar, and are there other sizes to pick from?
Order by part number WAKJ23, Metallics. There is a single configuration, 1/4 inch gray plastic anchors in a 200-count jar, so there is no size or finish option to specify on the order.
How fast can I get the Metallics WAKJ23 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics WAKJ23 come with a warranty?
Absolutely. The Metallics WAKJ23 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics WAKJ23?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics WAKJ23 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.