You may also like
Anchors .300 Head Pins W/Ceiling Clip (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics M50364 – Frequently Asked Questions
1) What exactly comes in the Metallics M50364 jar?
The M50364 is a jar of 100 .300 head drive pins supplied with ceiling clips. The pins and clips come together, so one jar covers 100 ceiling attachment points without ordering the clip separately.
2) Are these the .300 head pins my powder actuated tool takes?
The head diameter on these Metallics pins is .300, which is the head size a .300 head powder actuated tool load uses. If your tool or load is set up for a different head diameter, these will not seat correctly, so match the .300 call-out on the tool.
3) What is the ceiling clip on these pins used for?
The clip on the M50364 pin is for hanging wire or threaded rod off a concrete deck, the usual way electricians suspend branch circuit wire, flex, and lighting whips below a slab. You drive the pin into the deck and the clip gives you the attachment point.
4) Is this an anchor for concrete or a fastener for steel studs?
These are drive pins for concrete, filed with concrete anchors rather than sheet metal screws. They are driven into a concrete deck or slab; for light gauge steel framing or wood joists you want a screw-type hanger instead, not a drive pin.
5) Do I need to buy ceiling clips separately with the M50364 pins?
No. The clips ship assembled with the pins in the jar of 100, so the only other thing you need is the powder actuated tool and the correct load for a .300 head pin.
How fast can I get the Metallics M50364 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics M50364 come with a warranty?
Absolutely. The Metallics M50364 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics M50364?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics M50364 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.