You may also like
Anchors 3/4 x 7 Hx Hd Lg Dia CS St-zn (Box 5)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics LCS3470 – Frequently Asked Questions
1) What size is the Metallics LCS3470 concrete anchor?
The LCS3470 is a 3/4 x 7 inch hex head large diameter anchor, so 3/4 inch diameter with a 7 inch overall length. That length is what you work from when you add up your fixture thickness plus the embedment you need in the concrete; the fixture thickness eats into the 7 inches, and what is left is what goes in the hole.
2) Are the Metallics LCS3470 anchors stainless or plated steel?
Carbon steel with a zinc plating, not stainless. That is fine for dry interior work: slab-mounted equipment, strut and rack bases, interior machinery feet. For sustained outdoor exposure, washdown areas, or anywhere chlorides are present, a zinc plated carbon steel anchor will corrode and a stainless anchor is the right call.
3) How many anchors come in a box of Metallics LCS3470?
Five per box. At 3/4 x 7 inches these are large diameter anchors, so the pack is small by design, and a job needing a couple dozen holding points means ordering multiple boxes.
4) Does the LCS3470 anchor need a nut and washer, or is it a hex head bolt-type anchor?
It is a hex head anchor, so the head is integral and you drive it with a socket or impact wrench straight onto the fixture. There is no separate nut or washer to thread on the way a wedge anchor or threaded rod assembly works. Install through the clearance hole in the part you are fastening and tighten to the head.
5) Will a 3/4 x 7 anchor work in hollow block or drywall?
No. The LCS3470 is a large diameter concrete-type anchor that develops its hold in solid base material. Hollow CMU, brick veneer, and any stud or drywall assembly call for a different fastener entirely, a toggle or a block-specific anchor, not a 3/4 inch 7 inch anchor.
6) What is the Metallics part number for the 3/4 x 7 hex head anchor?
Order it as Metallics LCS3470. That number covers the 3/4 x 7 inch hex head large diameter carbon steel zinc plated anchor supplied five to a box, which is what a distributor or purchasing agent should quote against to avoid getting a shorter 3/4 inch length.
How fast can I get the Metallics LCS3470 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics LCS3470 come with a warranty?
Absolutely. The Metallics LCS3470 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics LCS3470?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics LCS3470 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.