You may also like
Anchors 3/8 X 2-3/4" Power Stud Plus S Csz (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics M7412SD1 – Frequently Asked Questions
1) Can I use the Metallics 3/8 x 2-3/4 Power Stud Plus in a hollow block wall?
No. A Power Stud style anchor is a wedge anchor for solid concrete, and it works by a clip expanding against the sides of a drilled hole. Hollow CMU cells give it nothing to grip. For hollow block use a toggle, sleeve, or screw anchor rated for hollow masonry instead.
2) Is a 3/8 x 2-3/4 wedge anchor the right choice for hanging strut and conduit racks off a concrete deck?
That's the common use for it. Electricians use 3/8 inch wedge anchors to fasten strut channel, beam clamps, and support brackets to poured concrete slabs and walls. If you're anchoring into the underside of a deck or into a member with limited depth, check that the 2-3/4 inch length leaves enough embedment after the fixture thickness; a thicker fixture eats into it and you'd want a longer stud.
3) What hole size do I drill for a 3/8 inch Power Stud wedge anchor?
Match the bit to the anchor diameter: a 3/8 inch wedge anchor goes in a 3/8 inch carbide hammer-drill hole. The hole is drilled through the fixture where possible, blown clean, and the anchor driven until the nut and washer bear on the fixture, then torqued to expand the clip.
4) Does the Metallics M7412SD1 come with nuts and washers?
Yes. Power Stud Plus anchors ship as a complete assembly, each stud carrying its own hex nut and washer, so nothing extra is needed to set them. The jar holds 100 assemblies.
5) Can Power Stud wedge anchors be removed and reused?
No. Once a wedge anchor is torqued, the expansion clip is permanently set against the hole wall. You can back the nut off and pull the fixture, but the stud stays. To clear it, cut or drive it below the surface and patch. If you need a fastener you can remove and re-anchor, use a concrete screw anchor instead.
6) Is the Metallics M7412SD1 stainless or plated steel?
It's the carbon steel version with a zinc plated finish, which is what the standard Power Stud Plus designation covers. That suits dry interior concrete. For exterior, wet, or corrosive locations, specify a stainless or hot-dip galvanized wedge anchor rather than this one.
How fast can I get the Metallics M7412SD1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics M7412SD1 come with a warranty?
Absolutely. The Metallics M7412SD1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics M7412SD1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics M7412SD1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.