Metallics LCS5865SS Anchors 5/8 x 6-1/2 Hx Hd Lg DiaCS SS (Box 10)

No. A large diameter concrete screw anchor like the LCS5865SS cuts its own thread into a pre-drilled hole in concrete, so there is no sleeve, no wedge, and no adhesive to mix or cure. You drill, blow the hole clean, and drive the anchor with an impact wrench on the 5/8 inch hex head. That also means it can be removed and the hole reused for the same fixture, which a wedge anchor will not let you do.

Stainless is what you want where the anchor sees weather, washdown, or chemical exposure: exterior equipment pads, rooftop curbs, parking structures, pool and coastal work, food service and treatment plants. The LCS5865SS is the stainless version of the 5/8 x 6-1/2 hex head large diameter concrete screw, so you get the same mechanical install as a plated screw anchor without the rust bleed down the face of the concrete. For dry interior work indoors, a carbon steel equivalent normally does the job.

The LCS5865SS ships as a box of 10, so it is sold by the box rather than the piece. For a job needing a count that is not a multiple of 10, plan on rounding up; the spares are worth having anyway since a screw anchor that spins out in soft or cracked concrete has to be replaced in a fresh hole.