You may also like
Anchors 6--8 X 3/4 Red Wall Ancr Plas (Jar 100)
Manufacturer Resources
Product Specs
- Minimum Purchase:
- 100 units
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Family:
- Electrical Supplies
- Sub Division:
- Electrical-E H2
- Product Type:
- Anchor
- Product Group:
- Fasteners
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics JRA1 – Frequently Asked Questions
1) What screw size do the Metallics red plastic wall anchors take?
The Metallics JRA1 red plastic wall anchors are sized for #6 and #8 screws at 3/4 inch anchor length. If you are driving a #10 or larger screw, this is the wrong anchor, and a 3/4 inch anchor body means you need at least that much clear depth behind the wall surface.
2) How many red wall anchors come in a jar of Metallics JRA1?
They ship 100 anchors to a jar. The jar pack is the ordering unit, so a van stock or a panel-mounting job gets counted in hundreds rather than loose bags.
3) Are these red plastic anchors suitable for hanging electrical boxes and device plates on drywall?
They are a light duty plastic anchor carried as electrical fastening stock, sized for #6 and #8 screws. That range covers low load work like mounting small enclosures, cable clips, straps, and plates. For anything carrying real weight, or for an overhead pull, step up to a toggle or a screw-in metal anchor instead.
4) Can I use the 3/4 inch red plastic anchor in a solid concrete or masonry wall?
Yes, a plastic expansion anchor of this type works in a drilled hole in concrete, block, brick, or plaster, where the hole walls grip the body as the screw expands it. In hollow drywall it depends on having the full 3/4 inch of anchor seated in the board. Match the drill bit to the anchor body so it seats snug rather than spinning.
How fast can I get the Metallics JRA1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRA1 come with a warranty?
Absolutely. The Metallics JRA1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRA1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRA1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.