You may also like
Anchors 6--8 S-Dr Wall Ancr Kit Zn-Lit (Box 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Family:
- Electrical Supplies
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics ZSAL2K – Frequently Asked Questions
1) What screw size do the Metallics ZSAL2K wall anchors take?
The ZSAL2K self-drilling wall anchor kit is sized for #6 and #8 screws, which covers the great majority of light-duty drywall work: device plates, low-voltage brackets, cable clips, and small junction or raceway hardware. If the fastener on your job is a #10 or larger, this is not the anchor for it.
2) Do I need to pre-drill the wall for the Metallics ZSAL2K anchors?
No pilot hole needed. These are self-drilling wall anchors, so the anchor body cuts its own hole in the drywall and you drive it flush with a #2 Phillips driver, then run the screw in. That makes them a fast choice for a contractor setting dozens of plates or brackets in a day, versus a toggle or a plastic expansion anchor that has to be drilled first.
3) How many anchors come in the Metallics ZSAL2K kit?
It ships as a box of 100 anchors, packaged as a kit, so it is sized for shop or truck stock rather than a single fix. For an electrical contractor or MRO stockroom that is standardizing on one drywall anchor for #6 and #8 screws, a 100-count box is the usual reorder unit.
4) Can I use self-drilling drywall anchors like the ZSAL2K in wood studs, plaster, or concrete?
No. The ZSAL2K is a hollow-wall anchor and belongs in gypsum board only. Driving one into a stud, hard plaster, masonry, or concrete will strip the anchor or snap it off. Into wood framing you just run the screw directly; for masonry or concrete you want a sleeve, wedge, or screw-type concrete anchor instead.
How fast can I get the Metallics ZSAL2K delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics ZSAL2K come with a warranty?
Absolutely. The Metallics ZSAL2K is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics ZSAL2K?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics ZSAL2K from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.