You may also like
Anchors Sprg Wing TogBt 1/8" #6 4" (Jar 50)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics J1562 – Frequently Asked Questions
1) What size toggle bolt is the Metallics J1562, and what screw does it take?
The J1562 is a 1/8 inch spring wing toggle bolt with a #6 size and a 4 inch length, sold 50 to a jar. The 1/8 inch call-out is the bolt diameter, and the 4 inches is the bolt length available behind the wall.
2) Will a 4 inch spring wing toggle bolt work in a hollow wall with limited cavity depth?
A spring wing toggle needs enough open cavity behind the board for the wings to swing fully open before they can seat against the back face. With the J1562 at 4 inches of bolt length, the usable grip is whatever is left after the wall material thickness, so a thin panel leaves most of the 4 inches projecting into the cavity. In a shallow cavity, or a wall filled with insulation or blocking, the wings will not deploy and you want a different anchor type.
3) Can I remove the screw later and reuse a spring wing toggle bolt?
No. Back the screw out of a spring wing toggle and the wing assembly drops into the wall cavity and is lost. If you expect to take the fixture down and put it back, use a strap toggle or a threaded hollow wall anchor that stays captive in the board instead. Order the J1562 in the 50 count jar if you want spares on the truck for exactly that reason.
4) What size hole do I drill for a 1/8 inch spring wing toggle bolt?
The hole has to be big enough to pass the folded wings, not just the 1/8 inch bolt, so it is noticeably larger than the bolt diameter. Fold the wings flat against the bolt of the J1562 and drill to that width, then push the wings through and pull back on the bolt head as you tighten so the wings catch the back of the board.
5) How is the Metallics J1562 packaged for shop or MRO stock?
It ships as a jar of 50 of the 1/8 inch by 4 inch #6 toggle bolts, which is a bin-friendly count for a shop shelf or a service van rather than a single-use blister pack.
How fast can I get the Metallics J1562 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics J1562 come with a warranty?
Absolutely. The Metallics J1562 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics J1562?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics J1562 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.