You may also like
Anchors Sprg Wing TogBt 1/8" #6 Trd 32 Lgt 4" (Jar 50)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics J1530 – Frequently Asked Questions
1) What size screw and thread does the Metallics J1530 spring wing toggle bolt use?
The Metallics J1530 is a 1/8 inch spring wing toggle bolt with a #6-32 machine screw thread and a 4 inch screw length. The 1/8 inch (#6-32) size is the smallest common toggle size, so it pairs with the mounting holes on light-duty items like small device brackets and conduit straps rather than heavy equipment.
2) How many toggle bolts come in a jar of Metallics J1530?
Each jar holds 50 of the 1/8 inch #6-32 spring wing toggle bolts. The jar pack is the shop-stock format, which is how electrical contractors and MRO stockrooms usually buy toggles, rather than a job-count bag.
3) Can a spring wing toggle bolt be removed and reused later?
No. Once the J1530 toggle is set and the screw is backed out, the spring wings drop into the wall cavity and are lost. Plan on a replacement toggle for any fixture you expect to take down and reinstall, or use a threaded hollow wall anchor that stays captive in the wall instead.
4) Is the Metallics J1530 toggle bolt the right anchor for mounting an electrical box or strap to hollow wall?
Yes, that is the intended use. It is an electrical-trade anchor, and the 1/8 inch #6-32 thread matches the screw size common on device brackets, conduit straps, and small boxes in hollow wall or hollow block. For heavier loads on the same wall, step up to a larger toggle diameter such as 3/16 or 1/4 inch rather than relying on more of the #6 size.
5) What size hole do I drill for a 1/8 inch spring wing toggle?
Drill large enough for the folded wings to pass through, not just the screw. On a 1/8 inch (#6-32) toggle like the J1530 that is typically a 3/8 inch hole. Fold the wings flat along the screw, push them fully through the wall, then pull back on the fixture while tightening so the wings seat against the inside face.
6) What is the Metallics part number for the 1/8 inch 4 inch spring wing toggle bolt?
Order it as Metallics J1530. That number covers the 1/8 inch diameter, #6-32 thread, 4 inch length spring wing toggle bolt supplied 50 to a jar. Length and diameter both change the part number in this family, so the J1530 designation is what pins down the 4 inch version.
How fast can I get the Metallics J1530 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics J1530 come with a warranty?
Absolutely. The Metallics J1530 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics J1530?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics J1530 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.